CAMO Marksman Pro-NB, Narrow Board Deck Tool for Edge Fastening Installation, Fits 3-1/4 to 5" Boards, 3/16" Spacing, (0345015)…

I have not used this one but I have used the Camo pro. This is a great tool this is needed when laying hidden screw deck boards. Make sure that you get the correct one the NB stands for narrow boards that would be something for a 2x4 or 1x4 majority of the decks I believe are 2x6 which this will not work for that. Very handy tool that is needed if you're going to work on laying deck boards for hidden fasteners. Makes life easier and saves time.

This really makes the deck look good! I used it to install cedar 2x4 on the deck and it worked very well. I didn't need to pre-drill the boards and it did a decent job of pulling down slightly warped boards (I discarded boards with big wow's). It's very sturdy and I was able to use it to position most boards all by itself, while using a couple of flat bars for fine-tuning spaces (3/16") or holding down boards until the screws were installed. One note to include, it takes a lot longer to use this than just putting screws down through the top of the boards, but the clean look, without splinters or tops of screws showing is definitely worth it. I can't emphasize how sturdy it is - I installed 1,400sf of decking, including steps and a rim board - and it still looks almost brand new. Plus, while I purchased the bulk screws with the fastener, when I needed a few extras I just went to Home Depot and got a small box (they cost a little more than online, but no waiting for postage).

I saw this deck fastening system while watching a video online. I decided to try the system because there are no surface blemishes when the deck is completed. This tool did everything it advertised and I was very happy with it. My only complaint was that a different tool was needed for 2x4's and 2x6's. If you are using both dimensions of lumber on the deck surface, you'll need two different tools. It does take a lot longer to install the deck surface, but the finished product looks great. It will be interesting to see if fasteners stand the test of time.

great tool...easy to use.

My fault this doesn’t get a highest rating. I was psyched about this tool when I saw it on a deck building YouTube video. I still am but what I did not understand was that there were different size tools for different width deck boards. If I hadn’t been under a tight deadline I would have exchanged it for the larger size that fit my deck boards to finish the project. I still think it’s a great tool.

Great system for installing deck boards without unsightly visible screws. It also made spacing the decking simple. The only drawback is you must use the special screws designed for this tool, but well worth it in the end. Built well to last. I recommend to a friend or family member.

If you want to install exterior decking WITHOUT running fasteners through the face where they'll collect water, splinter and make it look unprofessional, then this is a MUST HAVE tool!! Don't forget to buy the special drill bits needed when installing Ipe, Mahogany, Meranti, (any) Hardwood decking. You'll thank me later!! With this tool, you can also install typical pressure treated decking, composite decking, etc, though pre-drilling is not really necessary since these materials have a softer composition. You'll also need to buy the specific Camo screws to use this tool, but the results are FANTASTIC!! I've never had a dissatisfied client!!!

Tool is built well. Hides screws very well while the holding power is excellent. I used the tool with IPE and would suggest pre-drilling holes as suggested for such a hard a dense wood to prevent the wood from cracking and pulling apart at screw head. This is no fault of tool just the characteristics of the wood itself. Any other wood and the screws go in with no pre-drilling and leave a perfect finish.