MOES STAR RING ZigBee Smart Switch, 10A, No Neutral Line No Capacitor, Compatible with MOES/Smart Life App Remote Control, Timer, Alexa Google Home Voice Control, Requires ZigBee Hub, 2 Gang-Grey

Really great product. Sturdy with soft one touch led lit switches. Absolutely delighted and will be ordering more for the whole house. Integrates really well with other Moes House smart products to create scenes using the Tuya App. Now able to control lighting using Alexa or smart phone from anywhere in the world remotely. 😀

Easy to set up but needs neutral wire so worth considering if you are doing work at the same time. Could easily associate switches to allow buttons on one switch to control lights connected to another. Ive attached a video of how I set this up. This is exactly the same as that sold on Amazon as LNL (I bought four Moes switches and two LNL. They both have the same labels on them. Just a different cardboard sleeve and slightly different instructions) Update over a year later: All is good although I've had to reset a few of the switches occasionally. Sometimes a switch will drop off the network. As each switch is always powered, I have to go to the consumer unit and briefly cut power to the light circuit and then the switch will power up and find WiFi again. If WiFi connectivity goes down then the switches can't talk to one another so you need to go to the switch that is directly wired to the light to operate it. If you press a button on a switch which is linked to another too rapidly, say five times, the light may flash on and off for a bit. The UI of the smart life app is pretty poor. So far the plastic has stood the test of time but as others have noted it feels a bit cheap. All of the connectivity issues are annoying but very rare especially if you have good internet. Going to knock off one star.

The switch is easy to install, looks good and works with HA/Zigbee2MQTT. Two gripes: 1) Pressing the buttons feels 'spongy' and cheap 2) When pressing both buttons simultaneously or very fast after each other, only one will work, which I find very annoying Minor improvement opportunity: It would be nice to be able to configure the illumination to be on when the lights are off, so the buttons can be easily found in the dark. (Instead, the illumination is on when the lights are on.)

I had been looking for a Wifi light switch for a while, i did look at the bulbs, but having a controller in each bulb is ok, until the bulb breaks and then it costs a lot more to replace a single bulb, where as having the controller in the switch keeps the cost of the bulbs down. The switch is very deep and the backbox in my wall was not deep enough to fit the switch. I got a deep backbox and then chopped out the wall so that the box would fit. Once i had done that, wiring up the switch was easy. I downloaded the app and then setup the switch really quickly, it works really well and is responsive.

Will not connect

Wanted a switch with neutral option. This is lovely, with a nice tactile clicky click when pressing the buttons. Integrated perfectly with Zigbee2MQTT to home assistant.

Really happy with this product. Was easy to install, integrates nicely with my Philips Hue hub and Alexa. Only 1 small thing I would change, and it is the shade of white. Its a bit dull. Would have preferred a brilliant white, but overall I’m really pleased.

It is fixed in my garage and paired with my router and smart phone Pleased with it

Funktioniert auch super in Home Assistant mit Skype Connect👍

El embalaje exterior llegó correctamente, pero la caja en su interior llegó abierta y deteriorada. El dispositivo es ruidoso al apagar, con un sonido tipo muelle desagradable. Las funciones, al menos en Z2M, son limitadas. No tiene decoupled mode ni detecta dobles pulsaciones. Puedes elegir encender o apagar el led y cuando quieres tenerlo encendido. Estéticamente es bastante bonito. Los tornillos para conectar los cables podrían ser de mejor calidad. El precio en Amazon es abusivo.

Funktioniert Einwandfrei. Einfacher Einbau, Sehr gute Haptik und stabile Verbindung mit Home Assistant. Was will man mehr?!

Ottimo articolo ben fatto e facile da installare e configurare

Le produit est compatible avec ma passerelle Hue, il est aussi compatible avec d’autre passerelle zigbee pour l’appairer il faut appuyer 7 secondes sur l’interrupteur et le voyant clignote et l’appairage sur fait depuis votre hub. L’interrupteur offre la possibilité de l’activer physiquement ou via l’application Hue. Grâce à Homebridge et au pont Hue, il peut également être rendu compatible avec HomeKit. Je ne pas actuellement évaluer sa fiabilité sur le long terme.