SB Components New ABS Enclosure, Protective Cover Case For Raspberry Pi Zero & Zero 2 W - (Clear Transparent)

Does what it needs to do and seems very robust. There are two tops, one closed and one with a slot to access the header pins. The closed one is still high enough to fit over a board with the headers in place (I always solder a header block on to the boards, but don't always use the pis in applications where I need the headers).

This little case is fantastic value for money, with the option to have it closed or open for the GPIO pins. Arrived super quick too, I'm very impressed! Fits the Pi Zero perfectly.

As other reviewers have mentioned, the case (base) needs a little modification:- the PCB is supposed to go under a tiny catch on the base (behind GPIO pins 8 & 10) which is too tight, making subsequent removal of the board very difficult; I had to cut out the catch before I could remove my Zero (W 1.3). With the benefit of hind-sight, if I had FIRST carefully smoothed the corresponding edge of the board (with an emery board), it might have been OK. Having sorted out the problem with the catch, the Zero drops in easily with clearance around all the connectors; the camera connector can be opened and closed and the SD card fitted/removed without problems though the lid has to be popped off first. Sufficient clearance around the GPIO header for a header plug (photo 2 shows an RTC plugged in), and the base even has a shielded screw-mounting hole. I wouldn't want to unscrew the tiny self-tappers (PZ0) more than a few times but what can you expect at the price. If you need some little stick-on feet, buy a pack of Drawer/Door Buffers/Cushions.

I love this little case with it's two possible tops, one which allows access to all the GPIO pins.

Excellent item, perfect for the job *******

Fits the zero perfectly. The zero is held in place securely by 4 tiny screws and the case is very robust. There are two tops for the case, one with a cutout above the io pins and another that is sealed, so you can choose which you need. There is a slot in the bottom so you can hang the case on a hook or nail which could be very useful if you are hanging it near external sensors. Very happy with the case.

This is a robust & surprisingly decent little case at an affordable price. There is plenty of room inside for a passive heatsink. There are just a couple of tiny design issues which need addressed, so I've knocked 1star off a 5star review because of them: 1) once the two halves of the case are pressed together, the slot at the end where the microSD card is inserted, is so tight around the card, that it's impossible to extract the microSD. The only way to get it out, is to prize the case apart again so you can slide the microSD out (and the case is so neatly & tightly together that you need a knife or tough fingernail to get them apart). This could be SO easily fixed just by recessing or cutting away a tiny bit of plastic just above the microSD slot. 2) as others have said, there is a tiny 'blob' of plastic inside the case which is meant to hold the Pi PCB in place. It simply serves to make it too tight to get the Pi into the case without risking damage. You have to cut the blob away with a knife or Emery paper. 3) for some reason, they've added ventilation slots on the underside of the case. Surely it would've been more sensible for these to be on the topside above the heatsink space? 4) the supplier includes 2 case tops for you to choose - one with a slot to expose the GPIO pins, and one which is fully enclosed. I would think it would be cheaper to manufacture & ship just one case top but with a 'cut away' slot for those who want access to the GPIO pins (this is as other Pi case providers do). An excellent tough little case. I like it.

Perfect fit for my Pi Zero 2 W. What I did not see mentioned and was curious about was that you actually get two different tops along with the base. one with an opening for the GPIO pins and one with no access hole if you do not plan on using said pins. Great product. Great Price @ £2.99

Doesnt fit properly and price is too high. this is not even worth 50 rs

I got this for my first Raspberry Pi. I had purchased Adafruit's case, but neither me, nor my tech savvy son, could get the pi to sit straight in that case. It sits perfectly in this one. You have two choices of lids depending if you need access to the pins or not. There are holes for the ports on the card and the have convenient text labels embossed onto the case that even my 55 year-old eyes can read. I put away my magnifying glass that I use to figure out which micro-USB port is for the power and which is for USB. It comes with some little screws. It's not clear to me what they are for. They are tiny and would not be used to mount the case anywhere. Perhaps they are to secure the pi in the case, but it fits snugly so they seem redundant if that is their purpose.

best case

La caja está muy bien pero es solo para la versiones 1.2 o anteriores, la unica diferencia es que la V1.3 la conexión de la camara está integrada a la placa y está caja no lo tiene.

Gehäuse passt perfekt zu dem Raspberry Pi Zero W. Das Gehäuse macht einen super und soliden Eindruck. Besteht aus drei Teile. Ich würde es nochmal kaufen. Schnelle Lieferung. Bin zufrieden.