Tools 78 03 125 Electronics Super Knips, 5-Inch

This is my first set of Knipex flush cutters. Excellent quality & function. I've used Lindsrom, Zuron & other high quality cutters for decades. This will be in my collection from now on!

This is a typically flawless tool from Knipex. I have several tools from Knipex, which I buy only when it is a tool that I must absolutely positively depend upon to get a job done. Otherwise I seek out alternatives. The tool is made in Germany, living up to the German reputation for top-quality tools. Good looking, well-finished, and everything about it is perfect. I did a test cut, comparing the Knipex to a close competitor, the Xuron 170-II. These cutters are the same length, style, design, and differ only in the materials (the Knipex is Stainless Steel), and in the manufacturer - the Xuron is made in USA. The Knipex is more than twice as expensive as the Xuron. Does it cut twice as well? Not really. It DOES cut NOTICEABLY better, which is usually only obvious when comparing junk tools to good tools. But that's Knipex for you. They go the extra millimeter. If you want the ABSOLUTE BEST, then this is the tool for you.

These are nice and sharp, I am wiring up a project vehicle and mostly use them for zip ties, but also for smaller wires. Nice clean cuts and the tab to hold the cut portion works pretty good too.

Handy little snips, i primarily use them to clip zip ties on computer builds. Very high quality. Knipex all the way!

Tsunoda KBN-150 - 6” https://www.amazon.com/dp/B0756YR7XX/ref=cm_sw_r_as_gl_api_gl_i_ZVS2YSNTYP3Q79QEVG3M?linkCode=ml2&tag=subjeccyclis-20 - Cable tie puller provides excellent grip for tightening - Jaw opens very wide - Exceptional sharpness - No spring for assisted opening - Point end is slightly flat, not a sharp point Tsunoda PN-175 - 7” https://www.amazon.com/dp/B009FT3QA8/ref=cm_sw_r_as_gl_api_gl_i_7DANNFNVJSR5N3JZTWVN?linkCode=ml2&tag=subjeccyclis-20 - Jaws open wide - Exceptional sharpness - Spring tension is modest - Sharp pointed end - Nice balance of size with large cutter head Tsunoda PN-200 8” https://www.amazon.com/dp/B009FT3Q44/ref=cm_sw_r_as_gl_api_gl_i_BBXD03GPEDGY6KW8DGZ1?linkCode=ml2&tag=subjeccyclis-20 - Jaws open wide - Exceptional sharpness - Sharp pointed end - Spring tension is mostest - Bolt-stop helps protect cutter edge from damage under high leverage - Larger size provides extra leverage for effortless cuts KNIPEX 78 03 140 - 5 ½” https://www.amazon.com/dp/B07MZF6SPZ/ref=cm_sw_r_as_gl_api_gl_i_VTGWQ2FSVK5SC255KH67?linkCode=ml2&tag=subjeccyclis-20 - Jaw opening is very narrow - Hinge action is velvety smooth - Spring tension is excellent - Exceptional sharpness - Sharp pointed end - Best corrosion resistance Selection/Comparison For your particular application, one of these tools may be preferred over the other. All cutters offer exceptional sharpness and solid construction. The 6” tie cutter model lacks a spring to assist opening. However the jaw opening is unparalleled and the grip section is terrific for tightening zip ties. It’s flat ground tip was likely chosen to protect the surface beneath a zip tie while cutting. This limits some precision use but makes sense given its intended application. Its head is also angled to allow easy access for flush cuts against walls or in tight spaces. While the KNIPEX offers exceptional quality, the narrow opening jaws severely limit its versatility. However, for the right application the KNIPEX would be great for delicate work in a compact form factor. The grip, spring and precision tip are terrific. The hinge action is unrivaled. For a tradesman tool, the lack of a tip protector or spring lock is a mistake. However, none of these tools offer a lock for transport. Both the 7” and 8” Tsunoda cutters offer the same quality and features with the 8” adding a bolt-stop which can be used to promote blade protection or to execute partial depth cuts. The 8” also offers a slightly larger/longer cutter which could be beneficial for cutting large plastic crate-ties.

Flush cutters that can ACTUALLY flush cut zip tie tails. Leaves zero sharp bits sticking out.

Fantastic little nippers. Fit in small spaces and cut with ease.

The best little cutters ever! I use these daily at work for cutting zip ties and small things like that, and it cuts it off flush so you don’t cut yourself open from a zip tie.

Es una herramienta que por su calidad y diseño, me permitió trabajar con menos herramientas sobre la mesa, ya que su desempeño en varios esquemas, facilito mi trabajo

Initially it operated perfectly, then while tring to cut through a thin flat battery tag, the lower blade snapped off completely. All my other Knipex tools work with perfect satisfaction. Allen 21/05/2022

work very well for soft wire and zip ties used it on small diameter stainless wire and damage the cutting edge slightly very good for cutting alloy sump plug washers off would buy again

نفس الموصفات

good level entry electronic clippers