CHIPTRONEX X410B Mid Tower ATX Gaming Cabinet USB 3.0 with bottom PSU mount

So i bought this a few weeks ago and have been using the cabinet for 2 weeks i use an i5 9110f with a 1050ti which i will be upgrading soon. The cabinet is actually pretty nice for the price if you have seen a few videos about building a pc the process is going to be very smooth. I only have one problem you can install the hdd in the hardrive (if you have a problem installing it the railing system is screwed in from the bottom personally took me some time to install it) but you have to install sata ssd's in the front, thankfully i have a nice looking ssd but if your ssd doesnt look good then it might affect your looks. the psu shroud is beig enought to fit in a 1200w corsair power supply (you can easily install small sized psu's) the shroud eve has some dash shaped holes for the front panel connections and power reset and led switches. you can also sync the rgb with your motherboard which i highly recommend doing. overall a VERY NICE cabinet and for its price its amazing my temperatures were very bad they hovered in the high 70's when idle and mid 80's when gaming after switching to this the maximum temperature i get is 45. i actually recommend buying this over ant esports ice 511-MT as it offers more space for cable management and the rgb is better. hopr you find this useful thank you.

Cabinet is good. It comes with 2x 140mm static RGB front fans (but no exhaust fan). Things that are a bit of issue : 1. The rear exhaust fan ins not included and even the size of it not good the rear fan size is of 80mm which is not at all good in 2023. 2. Cabinet is very light weight I can lift it with just one finger as you can see in the picture so don't expect that much. 3. Cable management is a bit hard side because there isn't much space in the right side of the cabinet so that 24pin wire is really a task to manage although I did with multiple zipties and all.

The size of the cabinet is very small but if you have correct placement then it's a killer cabinet. I'm using gtx 1660 super card and ant esports 500watts psu. And a custom antec air radiator cooler. And it's perfectly fit for the components. No issue. Pros : 1. pre installed 2 rgb fans. 2. Has side tempered glass pannel. Looks awesome. 3. Easy to assemble. Cons: 1. Size is very compact but it's no matter. 2. Should have given a rear fan too, but it's a great deal for 2k guys. Final verdict: If you are looking for a pc buit at low cost then it's a must buy guys because of it's build quality.

It’s a nice case for those looking for a small form factor on a budget (not a proper SFF, close enough) Few things to consider 1) SSD mounting is limited to just one and it’s tricky, check the snap. Don’t think of fixing HDD, No mounts and cage included. 2) Am using this for my AMD 4700S. It’s a perfect for for the board. 3) The case front panel USB and Audio are too close. I can’t stretch them far enough to plug them in the motherboard. Am stuck with Audio only and non functioning ports. 4) Cable management can get messy. The rear panel doesn’t have room to accommodate excess cables. 5) Front fans looks nice. Mostly form over functionality’s. Besides above. Great case for my budget build and does the job.

Guys with 240mm radiator, STAY AWAY from this(n description they say it supports) . Also they have redisigned the front air intake and they dint update the Amazon description about this. THIS IS NON RETURNABLE. But Amazon says even if defect they can't do anything. Amazon said to contact seller/manufacturers, but in their side only one phone is displayed that to not working!!! I would say don't even think about warranty support. WRONG PRODUCT DESCRIPTION: It says supports 240mm radiator on top, the reason I bought was for it and good front airflow. Both are not as described. The ram (G Skills ripsaw) asus maximus viii ranger mb not fitting the case is not tall enough to fit the radiator. And about the front air intake, it's dumb design now(looks like they redesigned) and dint update the product photos. No front filer which was there earlier. Fan not able to full air thru the little duct on side with filter but holes are way big for dust. And the pci slot anchor is not regid at all and already looks like it was pushed inside, not sure if it will handle my rtx2070 card So IF YOU NEED GOOD AIRFLOW AND OR RADIATOR SUPPORT DOBT BUY THIS, YOU WILL LOOSE Rs.5000, ain't this a scam???? Sell a product with wrong description and not way to return???? Highlights ========= WRONG PRODUCT DESCRIPTION NON RETURNABLE NO SELLER CONTACT AMAZON SIMPLY DON'T CARE FOR THE MESS

It is one of the best cabinets / cases at this price point. The ARGB fans are awesome... they can even be configured to play with the sound. Lot of different settings and lot of presets. I am controlling them via the motherboard AuraSync software provided by ASUS. The cable management is also good and the airflow management is awesome. Your computer won't heat up if you use the given fans. 4 ARGB fans are already integrated. The tempered glasses in the front and one side is also of good quality but you have to be careful while handling them. If you break them the case will become useless. The only drawback I felt was the absence of media card reader in the front panel. I would also like to know from Chiptronex whether replacement IO front panel is available in case it gets spoiled by normal wear and tear.

You would have got 1 molex socket for each of the RGB fans each having 4 pins, you would have also got one molex socket having 3 pins. First connect the molex sockets having 4 pins to each other. Then connect molex socket with 3 pins to the previously connected 4 pin molex sockets. Now, you have only one socket (as you have connected one 4 pin molex + one 4 pin molex + one 3 pin molex socket with each other). Now connect the other end of 3 pin molex socket with molex socket of your PSU directly. You will see that both the RBG fans will start working. As far as, this cabiis concerned, well this is an entry level cabinet, you can't expect functions that of a high end cabinet. Overall, good cabinet at this price.

it's a good Jessie I am using this for around 2-3 years and and the acrylic panel is very good thought that it will get scratched out with time but it's great that it's been 3 years and I am using this on a regular basis not even a single scratch the build quality is ok you will get a good amount for cable management and its oppose the 8086 and 8088 motherboard it's a it's a good one and obviously the RGB lighting is very good the quality is very very good all the front HSC buttons and holder are not that great otherwise this is is an epic deal the only downside that it comes with the up mounted power supply socket otherwise this is very good