Multifunctional Resin 3D Printer Enclosure with Ventilation Filter, High Quality 3D Printer Vented Enclosure Tent Cover Eliminate Odors Compatible with Anycubic Elegoo Series LCD Resin UV 3D Printer

Needed an enclosure for my 3D printer and this one did the job for my ELEGOO Mars 5 Ultra. It comes with an exhaust fan and tubing to push out the fumes. The fan is strong and a bit loud but thats to be expected when you’re working with 3D printing. Definitely locks the temperature inside the enclosure. The design, fit and assembly is exactly what you need for a small enclosure and was super easy and straightforward to work with. Definitely worth the money, would totally recommend.

Love this! Have it hooked up to a charcoal filter. Keeps all fumes out of my area. Large, and covers everything great. Easy to setup.

It's a great enclosure that boasts a lot of interior space despite it's smaller footprint. The included exhaust rig does OK but if you're running in a smaller space you need to either pipe it into a second, beefier filter system or pipe it straight outside - the included charcoal filter does a lot for odor when using standard resin but after a couple of prints or switching to more specialized material the fumes are noticable. Granted mine is located in a 96sq foot space, but the consideration remains. The quality of the support rods surprised me, but for as good as those poles are it could stand to have some x supports along 3/4 of its sides; it feels flimsy when you open or close the zippered door. Overall as long as it's on sale it's definitely a good value. Easy to put up, maintains the heat as it should.

Fits my phrozen Sonic Mini 8K S which measures 11.4 x 11.4 x 16.9 inches perfectly with some room to spare all around it. Plenty of space to take lid off and put lid on, and I have room to insert my USB drive on the side of my printer and can comfortably reach to the back of my printer to turn it on and off with ease. The fan + hose is a game changer! Resin fumes extraction is ABSOLUTELY VITAL!!! Do not skip fumes extraction. This setup has everything you need to accomplish such except for connecting it to a window or wherever you wish to extract the fumes. You can get window inserts for super cheap on Amazon and the hose is long enough. I bought a silicon mat and lined the bottom of my enclosure although it's not required at all...just extra protection to help keep your tent safe in case of any spills. This entire setup is superb quality in every imaginable way! WOW! BUY IT NOW!!! You will not regret it!!!

Like the title says, this is super easy to set up and looks very sharp. It has cut the noise and smell of my printer way down. I barely hear the printer now and only get a very faint smell from it, my husband can't smell anything at all. There is also plenty of space inside it and we have the Mars4 printer. I was worried about it because of the price but it was worth it. Now I know my printer is protected and I also like how the zippers go all down the front side and open up the entire top so getting the printer in was no problem at all. Very nice cover.

I am very new to 3d printing and bought this item not realizing that it would not work with my printer so I reluctantly returned it after trying to figure out a way to keep it. It is a very high quality item, all the parts and pieces were present ( even had some extra) and it was easy for a newbie to assemble. My only advice is to measure your printer carefully and consider ease of changing filament before you select a model. Five star item and return was processed quickly without issue. Highly recommend this product and supplier.

The enclosure material seems to be alright. I had to use a saw to cut the scaffolding poles to fit into the shell. The one star is for the poor instructions and a zipper end ripped open on one side which makes it impossible to seal and was extraordinarily frustrating. The fan appears to be powerful enough for the size of the enclosure. The filter however is completely useless because when you attach it to the fan when building the enclosure, it obstruct the spinning of the blades. I got this for an Elegoo Satun 16k resin printer and I will say that it fits. However, the USB sticking out of the side might pose a problem and you may have to move your printer around before and after your prints because there is not enough room to open the printer and do your business.

While the enclosure seems nice the fan sucks, though it likely may be the wiring or switch that are bad. It worked once when I originally tested it. But as I went to turn it on after having set it up proper, it would not start. I tried swapping where it was plugged in, switching what thing the usb was plugged in, nothing. This fan will die on you, so unless you are prepared to replace it, or rewire it, don’t buy it.

Rien à dire, le montage est un peu moins facile que décrit mais reste simple. L'évacuation reste suffisante à condition bien entendu d'avoir une sortie vers l'extérieur. Il y a bien un petit filtre en charbon fourni mais il reste insuffisant pour éliminer les odeurs. Il faut vraiment une évacuation . Le petit ventilateur pourrait être aidé par un extracteur fixé sur la sortie.

Lightweight, but made with heavy-duty, durable, tear/scratch and water resistant materials (Think anglers' net-bags, rod holdalls etc) and in such a way that whilst not truly airtight, are good enough, with the fan-assisted venting, to contain heavy fumes and allow them to be vented outside via the provided fan and tubing. The 'door' or 'window' flap stops short of the 'ground' meaning that the heavy fumes will sink to the bottom of the enclosure and remain in a 'puddle', behind the strip of material across the bottom of the 'doorway' if the fan is switched off. Whilst the fan isn't powerful, and I haven't done a comparison test, it should do a better job than none at all. Having said that, I will be connecting a far more powerful 6in diameter fan to the tent instead. Meanwhile, the 3 inch ventilation tube, is, I think extremely good, tougher than most and with an internal silver-coloured metallic material lining and I will be using this to connect to my larger fan using a 'reducer connection'. I will either remove the provided fan or leave it switched off and use my larger fan to suck the air out. There is no point switching the provided fan on and trying to enhance the airflow using my large fan as well, because the smaller fan can only shift a smaller volume of air than my large fan and will therefore actually impede the airflow to my large fan. With everything set up properly, with the larger fan, it should be fantastic for containing fumes and removing them to outdoors through a wall vent in my hobby room. The slight criticism I do have of the enclosure itself, for those using a printer around the size of a Saturn2 is that the provided fan and vent area is right beside where the USB port is located on the printer, and, if you have an Elegoo heater one has to pull the printer far enough forwards to allow the power cable around the back of the machine, and for your hand to reach around to switch the heater on or off. And one more issue is that with the 'door/window[ fully open one has to struggle to lift the Saturn's cover up and over the z rails post AND THEN through the top of the 'tent frame' itself. This should be easier with practice, but maybe think about fixing a lifting handle to the top of your machine's cover? If not, perhaps it's a good idea NOT to place your enclosure on a shelf any higher than your waist.

Do drukarki A1 Mini jest akurat jak dodrukujemy top holder, głośny wentylator aaale coś kosztem czegoś.

Muy eficiente, solo le cambié el ventilador de 12v para más potencia, funciona bien, aisla sonido, temperatura y sobre todo los olores, le quedó bien a una anycubic m5s pro

dopo tanto tempo a ricercare un qualcosa per evitare l'odore della resina hò trovato questo articolo PRO: facile dà montare anche se non ci sono istruzioni in italiano,basta collegare i vari tubi(trà l'altro di materiale robusto)con i loro angolari e infilare la custodia dal basso. ventola molto potente e rumorosa,mà per me è meglio che sia potente e rumorosa che debole d'aspirazione sistema di filtraggio ottimo,un pò problematico l'inserimento ed il serraggio della fascetta di metallo sul tubo, io consiglio di allungare il tubo,inserire la fascetta e poi stringerla dopo logicamente aver inserito il tubo nell'alloggio della custodia custodia in materiale bello solido e resistente,cerniere di chiusura scorrevoli contro: la custodia sembra piccola mà invece è grandissima,hò una mars 4 max e dentro entrano due alimentatori(1per la stampante ed 1 per il riscaldatore)oltre ad una multipresa ed ad una usb a corrente,quindi se avete poco spazio non fà per voi. non è specificato come montare la ventola ed i relativi filtri a carboni,per me è stato facile,mà magari per chi non è pratico diventa un problema fissaggio della ventola al supporto del tubo di aspirazione,il problema sorge quqando cerchi di inserire le viti che tengono il tubo d'aspirazione e la ventola,perchè c'è una griglia sulla ventola e bisogna stare attenti quando inserisci le viti che non si sposti il materiale filtrante. prodotto valido che consiglio per chi come me usa la stampante per tanto tempo e non vuole sentire odori,logicamente il tubo và fatto uscire dà una finestra e non lasciato in una stanza o garage chiusi senza aria senò non serve a niente