M79 - Liquid Metal Thermal Interface Material (Tim) | 79 W/m*K | Subzero Overclocking™ - (1.0 Gram) for Maximum Thermal Conductivity All Coolers-While Overclocking CPU/GPU/PS4/PS5/Xbox

made the choice to get this LM since it was half the price of the conductonaut, and also my laptop( ASUS TUF A15 2021 R7 4800H RTX 3050 4GB) was hitting 95+ degrees Celsius in a modded minecraft server, on idle it would hover around 60C and had to buy a cooling pad( nc9200 ) to get the idle temp down to 40 c. [TO NOTE:- cpu tdp = 45W gpu tdp = 75w , TJMAX is the maximum temperature the chip can take] BEFROE APPLICATION:- CPU:- TJMAX = 105c idle= ~60 c full load = 95+ c full load wattage= 30 w full load clock = ~2900 mHz GPU:- TJMAX = 87c idle = 50 c full load temp = 86 c (GPU SHOULD NOT BE THIS CLOSE TO TJMAX, SUCH HIGH TEMPS CAN AND WILL KILL IT) full load wattage = 70 - 75 w full load clock= 1900 - 1700 mHz AFTER APPLICATION:- CPU:- idle = less than 40 c full load temp = 80 to 85 c full load wattage = 60 to 70 w full load clock = 4300 mHz CONSTANT GPU:- idle = less than 40 c full load temp = 70c full load wattage = 75w full load clock = 1915 mHz As you can see from the above the results are clear, the LM does what it is advertised for , in game temps have been slashed by 40 % , overall i am very satisfied with the quality of the LM. APPLICATION:- DO NOT ATTEMPT IF YOU DONT KNOW HOW TO DO A BASIC REPASTE WITH NORMAL THERMAL PASTE AS THIS CAN KILL YOUR LAPTOP IF YOU MESS UP , i read the reviews before buying this and all those crying were ppl who didnt know what they were doing. I followed the pinned guide on reddit in r/gaminglaptops . pinned guide is for reapplication of LM but in it he also gives a link to another post of his showing how to do it for laptops that dont come with LM from factory( like mine ). be careful to not swing around the earbud with LM on it as it may spill on the Motherboard materials for the application are:- LM, conformal coating, electrical or kapton tape, isopropyl Alcohol, 100% cotton buds, and patience overall it was easy to apply and it spread well on the die and the heatsink the preparation took the most time tho. i feel almost every laptop should be compatible. DO NOTE:- for direct copper heatsinks LM will get absorbed after aa few days so if u see the temps going up again it is time to put some more LM (do not remove the old LM just put a tiny bit more LM on the preexisting layer) this may occur a few 2 - 3 times initially but once the copper is saturated you will not have to repaste it for a good few years this LM offers amazing value for the money i paid and i am left extremely satisfied

Best conductor. Works great, heat transfer is way faster compared to normal paste, this is just an gram

Product is good, but they haven't provided any thermal paste/liquid metal cleaning pads like they used to provide earlier. This product is best for gaming laptops. If you have a gaming PC, then just use normal thermal paste.

Good value for money, I just wish it had more hard cotton swabs in the pack, I ended up using the cotton swabs very fast

I used in ps5 slim it works good,no more heating issue

Bekar hai mera laptop kharab kar diya

Performance only lasts a few months even after I electroplated the heatsink with nickel.

I have Asus Gstrix G15, and this is result of stress test under air conditioned environment... Before applying liquid metal temps was around 96 and now they are 73-75.. You can go for it.

ممتاز جداً

This product made a massive difference on my msi laptop my temperature was reaching 60 degrees on idle and when I replaced it with this the temperature went down to around 37-40 degrees on idle. The product comes with its own syringe and a few Q tips to help apply and smooth out the liquid metal. Great item I would recommend

My product did not arrive so I'm rating how they handled it. Something happened and shipping damaged it. They let me know and swiftly gave my money back. I've used this product before, however, and say it's fine for the price. Be careful! Know what you're doing with the stuff cuz it'll hurt components and destroy your mobo quick if you get it where it shouldn't go. Otherwise, it works really really well. About 10c lower temperatures off the rip. Can reuse application and lasts years when done right and left alone

perfect

Muy bueno