Rough Country Soft Roll Up Tonneau Cover for Chevy Silverado 1500 & GMC Sierra 1500 (2019–2026) – Marine-Grade Vinyl, No-Drill Install, Fits 5'10" Short Bed

Bought this for my 2022 Chevy silverado Custom Crew Cab. Last truck had a Roll-n-Lock, but didn't want to spend $1500. This RC Trifold was reasonably priced and had good reviews. Out of the box, initial impression was this is a quality product. Well packed, so zero damage. Install was pretty straight forward. Read the manual end to end before you start. That said, if you have a bed liner (truck came with drop in plastic liner) you will need do some trimming or modification to get the side rails to fit properly against the cab end of the bed. Leave every hand tight because you'll need to adjust the cover to make sure front and back (tailgate) are all sealed be rubber seals on cover. Did the install solo, and this can be a one person install, but a second pair of hands will make it easier and faster. Note the straps under the cover with the D-ring. They clip on to one of the tie down points on each side as a last point of safety if your main fastening points somehow come off. Overall its a quality product, fits well and looks great.

This is my second hard cover, and very satisfied with it. I had a retractable one and didn't like the way the canister took up space inside the front of the bed. This cover took that away. I've also had soft covers but was looking for something different. Order arrived on time, and the install was rather easy-with some minor adjustments. I installed this alone by myself, give yourself an hour or so to be safe. So far, very satisfied with the purchase. Product is of good quality, secures nicely, and so far, is holding up well even after some highway driving. No rain on it yet, so a water-tightness check will be needed. Final: If in the thoughts of a nice, easy to use, and affordable hard cover, consider this one. I'm glad I did.

The fit works well on this! It was easier to install with a friend. I had to adjust it a little more as I didn’t have it even on both sides, but once I did that it went pretty smooth! It also keeps the inside pretty dry! Just a couple of spots from how the truck is designed where som water streaks!

Really nice quality and a good price as well. Multiple reviews mention the tight fit and that seems to be the only issue with ours as well. It fits very tight so opening the tailgate gets annoying. It is the right size for the truck and otherwise it seals well, easy to use on and off functionality is good. In order to not have it so tight you have to loosen which then makes it not as secure and leak proof. We will see how it holds up as far as durability but they quality material seems to be there.

I absolutely love my RC bed cover. Like many others, I research things like crazy before purchasing. Rough Country was highly rated and reviewed everywhere. I saw a few owners here and there and asked the what they thought as well before purchasing. All positive. I even saved about $80 purchasing through Amazon. That combined with Prime free shipping, and I was sold. I was able to do the install myself. I do wish the directions were a little clearer, but luckily there are lots of instal videos around. Totally installation took me about 45 minutes. If I had to do it again, I could easily do it in a quarter of that time. I just had to keep flipping brackets around and changing their side because of the silly instructions. Still really happy with the cover, though. It fits well, bed is secure, and we’ve had a quite a bit of rain recently, and everything stayed dry. One important thing to note. If you have an automatic lowering tailgates, you’ll need to adjust the cover forward just enough to allow it to remotely lower. Too far back and the cover will keep the tailgates in place. I had to adjust several times, but now it works effortlessly.

So I bought both variations of this cover, the 3/4 bed first then full bed access versions. I was not impressed with either. The 3/4 bed access cover for 100$ less is listed as fitting 2019-2024 model 1500 GMC Sierra with Multi-Flex tailgate. It did not cover even 1/6" inch of the tailgate, it was at least 1/2" shorter than the full bed access which is 100$ more and that one covered at least a 1/2-3/4 inch of the tailgate. Now both were relatively easy to install BUT ease of install is not the issue, there are a few issues I want to point out. 1. Both covers leak BADLY. The 3/4 bed access cover did not leak as bad as the full bed access cover due to the mount at the front of the bed being an actual simple and decent design. The full bed access version leaked HORRIBLY. (See Photo) I filled up a cup with 16oz of water and it all drained into the bed. 2. Leak on full bed access is due to a terrible design to where the mounting screw for thew front end of the tailgate IS IN THE DRAIN CHANNEL! (See photo). They need a complete re-design of that screw mount placement to be OFF of the drain channel and not IN it. 3. The left side on the end of the tailgate was not flush to the frame due to the Multi-Flex tailgate bar (see photo) mount located in the truck bed (See Photo at least2-3MM). That can cause water to seep in from that end AND the locking bar was very tight on the left and I had to push pretty hard to get it to lock in place. 4. The drain plug design on the 3/4 bed access is plastic tap to fit and feels cheap. 5. The drain plug on the full bed access version is a much better METAL slip on hose mount. They seem well built but they are made cheaply at the same time, hence the 600-500$ less than higher quality Hard Tri-fold covers. I gave them 2 chances and both times they failed to meet my expectations so I am done with rough country.

Husband installed this cover and said it was not difficult. Keeps everything dry and protected.

Well made and easy to install

Item does not latch correctly. Does not open all the way to secure against back of the cab therefore you are not able to utilize the whole truck box without removing it first.