Fishman Matrix Infinity VT Pickup & Preamp System, Narrow Format, PRO-MAN-NFV

I bought this to fit to my 1971 Washburn D10. I have a similar pick up fitted to a Martin Acoustic, and was pleased with the sound of that. This pick up gives a great sound. It is not easy to get an acoustic guitar sounding like an acoustic when plugged in, but this does it brilliantly. I have started gigging with this in favour of the Martin. I got it fitted by a professional luthier, and he had to alter the groove on the saddle to accommodate the thin bar pick up. Not a job I would recommend anyone tries, unless they are pretty good at this type of job.

Very nice sound,clear and easy to install fitted to my old Ramirez classical guitar, had problems securing the battery and wires as the adhesive pads supplied was not good enough, Fishman need to improve on this minor detail

The stock piezo pickup on my Faith Venus was getting a bit flaky and to replace it and improve on the sound I tried this one. The sound was an improvement although you still can't get rid of the 'quack' totally. The tone control and EQ switch don't do a great deal to modify the sound IMO. You'd have more control with the EQ in your amp. Having said that the sound is mellower than that produced from the stock pickup. The thing that really let this pickup down IMO was the mount fittings for the volume and tone unit. You get a choice of two - equally useless in my opinion. There's some small amount of adhesive on the mounting surface, but this is weak and the contact surface very small and it had no chance of sticking to the unvarnished wood of the inside of the soundhole. You would have to do a bit of a DIY job to prepare the surface and maybe use some strong glue. The support person at Fishman suggested I try that. It's not a plug and play solution anyway. Even when you would fix it with glue, the pressure you put on the little EQ switch is pushing on an unsupported part of the unit and would easily dislodge it in time. I resorted to sticking it on the outside for now. The suggested location of the battery holder is on the neck join inside the soundhole. Having installed it there, and I don't see any better place to put it, it's a challenge to undo the velcro pouch and get at the battery without slackening off the strings. I would say to do a proper job of installing this prepare to do some DIY to your guitar.

Brought for an acoustic guitar, it was decided to ask a professional to fix some minor guitar issues (caused by an accidental drop). The final result after fitting was a noticeable improvement and amp connectivity.

Does exactly what it says on the tin. Easy to install with a little care and amplifies the acoustic guitar with little or no distortion. It still sounds like an acoustic guitar only louder, which is the object of the exercise.

Unbalanced under the bridge with b and e twice the sound as the others.

Worth swatting up on the internet though before drilling holes in your guitar as the supplied instructions aren't particularly detailed. I imagine these pick ups are usually fitted by 'professionals', however it was really easy to fit and sounds great.

I was looking at this vs an LR Baggs ibeam under bridge pickup, but opted for this since feedback resistance ranks high up my list of requirements. It was pretty easy to install, my guitar already had an endpin hole so the only hole I had to drill was the saddle/transducer hole. All in all took around an hour allowing for trial and error. Balance is pretty good, and the sound is great. On the "flat" setting it's a little dull sounding, but turning up the tone control lets you find a spot where it sounds just like your guitar does unplugged, just louder. Good feedback resistance. Overall I'd rate it 9/10 as if you had to drill out a hole for the endpin it would be quite fiddly, and the balance is perfect with fingerpicking but there is I'd say for strumming or flatpicking the top e string is a little quieter than the neighbouring b string. Other than that ticks all the boxes and it costs a lot less than any of the blend systems

Muy recomendable esta pastilla, suena muy bien, se pueden poner en cualquier guitarra acustica, no se nota, los controles se esconden y solo con un dedo se contran. Si no ves el cable al amp, no sabes porque suena asi. Es muy importante que la ponga un especialista.

I received this as a gift for my Martin Guitar. Installation was very easy (if you are somewhat handy). I had it installed in about 20 min. My action was a little too low to begin with so I did not shave anything off of my bridge. After the install my action was just right (might now be the case for everyone). So far I am extremely happy with this pickup. Prior to installing this, I has attempted to use a Seymour Duncan Woody. The woody did the job but I could never get used to having it in the sound hole and on too many occasions I would step on the cable pulling it out of the sound hole (usually in the middle of a gig...you can't recover from such an error). The tone of the Infinity Matrix is great, it picks up finger tapping, slide work, and palm slaps (something the Woody did not). The Infinity Matrix has made my Martin sound like a whole new guitar. I am very pleased with this gift. I have used it plugged straight into the PA and also plugged into a separate amplifier, both options sound excellent. No feed back, no need for a sound hole cover and the on board adjustments give a wide range of flexibility. Tips for installation: Be patient, start with a small drill bit and work your way up, do not try to do it in one try (you will chip the finis of the guitar if you rush it. Use Alcohol wipes everywhere that you are going to put the adhesive clips, allow the spot to dry for a few min. When installing the pickup wire, do not pull it too tight, to much tension on the pickup wire will cause it to under perform. A small dab of lock tight on the strap button will keep it from coming loose (notice I said small dab....too much and you will never get it off again. Be sure to tighten it just enough to keep it in place, you don't want to over tighten is or you will crush the wood. Overall, I am very pleased and love performing with it. As an additional note, I use a cable that has an "L" shaped jack on the end. This helps guid it through your guitar strap and minimizes the amount of plug sticking out of the end of the guitar (this is just a personal preference)

Von vielen Leute habe ich mich beraten lassen. welchen Pickup ich für meine Martin D-35 (Baujahr 1978) verwenden soll. Ich erhielt unterschiedlichste Empfehlungen. Letztlich wandte ich mich direkt an die Fa. Martin in den USA. Von dort kam sehr schnell der klare Hinweis auf den Fishman Infinty (narrow), als ein der besten Alternativen für diese Gitarre. Ich kaufte das Ding also, ließ es professionelle einbauen und bin völlig aus dem Häuschen geraten, als ichdie ersten Töne spielte. Der Klang kommt dem natürlichen Klang der Gitarre extrem nahe. Ein tolles Klangerlebnis. Unfassbar gut!!!

Sur une guitare folk c'est efficace et discret je suis d'accord sur le principe mais vois ne m'avez pas livré le bon article . Est ce que la commande est vérifiée avant expédition ? En tout cas c'est pas le fishman étroit que j'ai reçu !!!!!

Ottimo prodotto venduto a prezzo inferiore alla maggior parte dei distributori di strumenti musicali. Montaggio fattibile anche da soli se si ha un minimo di abilità nel bricolage. Montato su una Martin D35, suono superbo 😊