ReCover Tactical CC3P Grip and Rail System with Interchangeable Panels for The 1911, No Mods Require, Installs in Under 3 Minutes

I have tried the other cheap junk claiming to add secure rails to firearms, but THIS set-up actually works. I've outfitted four 1911 platforms with both the H & the P models. I prefer the P model myself as I like to add the Pearce Rubber Finger Molded Insert to each, & it seems to be made for those in mind. The H Model is still extremely solid though. As advertised, they'll install in around three minutes & they're extremely durable. My Olights attach just fine & haven't flown off during trigger therapy. I wouldn't trust a laser device to hold true past PB targets, but at PB it should keep you center mass. Overall, its light, comfortable & affordable, & definitely gets the job done.

Perfect addition to your 1911 if you don't have a rail. The material is quality made. And it gives that custom look as well as functionality. Very sturdy with a light mounted to it. Light weight so no extra weight to your 1911. Great deal for great quality. Feels good in hand. And simple and fast to install.

These fit my Springfield Mil-Spec great. And I think it makes the pistol feel better in your hand too. It came with 2 sets of grip panels however one set was for the same side. I just painted the ones I used. I tried a Streamlight TLR7, a Surefire & a Sig Foxtrot 1. They all fit like they should have. I do wish the plastic it's made from was a little more heavier duty. I've got another of of these on another 1911 & it's held up for over 2 years. So I guess they're strong enough. I'm very happy with how it looks & feels and will probably buy one for my Glock Gen 1 17. It's very easy to mount also.

so far so good, I have not fired the gun with the CC3P grip& rail. it feesls sterdy and comfortable in my hand.

I just got my first 1911 commander and like a lot of this model it has no rail, so I began looking for something to satisfy that need. That's when I came across this little beauty, at first glance it looked to be a bit cheap but that is the furthest thing from the product. The lines meet pefectly they align very well and the grip is a better feel than the factory ones. They feel and ergonomics are very much what I was looking for so much in fact that a good friend of mine is now buying one for his beretta. I also noticed that once the rail was on that the set now fits my xd holster which was a great help in carry but I did order the recover holster as well so I can carry with my tlr-1 I will be sure to review that as well. But fear not 1911 aficionados it works well and the colors are a great esthetic. The colors is less of a tan and more of an fde (flat dark earth) close to the magpul but not exactly but a very good look. The polymer is strong and durable and as I said the fit is great I thought I may need to sand, file or dremel something but that is not the case. Over all a great buy!!

Good way to mount a Laser on a 1911. I put a laser on it, and it holds zero very well

Its hard to be positive or negative about it really. Came when it was supposed to. Fit my rock island 1911 for the most part. The holes for the grip screw didn't line up properly had to file a little bit and contort the grip to get the grip screw to line up correctly. After getting it on and fitted properly the light fit just fine and had not issues until I tried to get it to fit in the holster I had been using without the light. The trigger guard was now to wide to fit that holster and had to buy the black hawk omnivore holster for the light I was using. The biggest issue I had was when I tried my safari land holster for the gun and light I had it didn't fit. I found that the rail sits a little over 1/4 inch to low for it to fit. So rather then get a $300 holster recorder to fit one firearm I decided to go with a different lower receiver all together. And after sometime of shooting the screws that hold the front of the grip together loosened up and I lost one. The other didn't fall out because I had the light on it. So if you have a holster specific for a 1911 with a rail that you intend to keep using or you are serious about having a rail on a firearm that your life may depend on do not buy this. If you are looking for a cheap option to have a rail and you are ok with buying new holsters just for this then go ahead. For the most part it worked for me but my firearm was an investment and my life and others depend on it working.

Fast shipping, that goes without saying. Fit my Taurus 1911 perfectly, this my 2nd purchase of the Recovery Tactical grip. Does exactly what it says. Look forward purchasing another. P.S. may need to add some grip tape, not as aggressive as I would like. But its no big deal for me. She is still beautiful.

L'ajustement n'est pas parfait. Le look es bien.

ガン側のメーカーによっては多少微調整が必要だけど基本的にはピッタリ 基本的にはミリガバ･series70専用、MEUもいけるかなくらい 古いガバメントを簡易近代化改修するみたいなコンセプトのものなんでナウいフレームには様々な理由で着かない グリップとしてもそれなりにいい物で、薄いガバメントのグリップを程よく厚くしてくれる（GLOCK17より少し薄いくらい） といっても単純なカスタムグリップとしては同メーカーのCC3Hの方が優秀なんだけど 結構頑丈で、付属のネジやガン本体が先に参っちゃうくらい長く使えるのもポイント高い

購入前は握り心地などに少し懐疑心が有ったが製品が届いてガンに装着し握ってみるとその考えはすべて無駄だったなと思いました。 想像していた以上に握りやすく良く考えられているデザインだなと強く感じました。 同じデザインのダストカバー部分のないグリップ部分のみのものが有れば良いのにと思うぐらいグリップデザインが気に入りました。 総じてとても良く出来ていると思います。

東京マルイ製のデザートウォーリアー用に購入しました(私はグレーを購入しました)。 特に加工せず、楽に装着する事ができました。 表面仕上げが非常に綺麗で、グリップパネルが2色同梱されているのが嬉しいところです。 角張った感じの形状ですが、思っていたより手に馴染み、特にマガジンキャッチボタン付近が純正より薄くスッキリしていて、マガジンを抜きやすくなりました。 アンダーレールも綺麗にきちんと成形されており、全く無理なくアタッチメントを装着できます。 純正のグリップと違い、ウエイトは入っていないので、装着後は銃全体がかなり軽くなった感じがします。 その他、動作への影響や細かいパーツとの干渉、本体への傷なども一切無く、洗練された良い商品だと感じました。 購入して良かったです。