Bosch T130RF1 3-1/4 in. 30 Grit Carbide Edge for Ceramics T-Shank Jig Saw Blade

MUI buen producto

I'm not sure if this is defective or what but it does NOT cut porcelain tile. Just sits there and I'll end up cracking the tile through heat if I keep going. Very disappointed. Bought this to clean up the corners where a 4 1/2" angle grinder can't get and I suppose I should have gotten some much smaller 'grinder blades instead. Project delayed another two days while I wait for something that actually does what it says it'll do. Grr.

It works on hard and soft tile. No problems when you go slow with it.

Perfect blade for cutting into the fiberglass bulkhead on my 20' Boston Whaler when cutting circles for installing loudspeakers.Take your time and have a spare just in case. The grit type blade cuts the Fiberglass during the up and down sweep and creates a manageably wide path, making the curve easier to maintain than a wood blade. If you're cutting Fiberglas with gel coat, this is exactly what you need.

Just used these brand new blades to cut a hole in ceramic floor tile for a heater vent. Used them in my brand new DeWALT jigsaw, and I've never been so disappointed in something so highly rated and by BOSCH. They wouldn't cut but a couple of centimeters and gave out. I even used water constantly to keep the blade cool. What a WASTE OF MONEY. NOT RECOMMENDED for what they claimed they were intended for.

Lets your jigsaw cut through Hardiebacker all day long for all of those special L cuts and valve holes. Just make sure you run your jigsaw slow and this blade won't burn out or dull anytime soon.

Blade had no problems cutting ceramics,just remember to use slow speed on you jig saw.Blade sill sharp after cutting all day.

Worthless. Generally I like Bosch blades, but this item -- says for "ceramic" on the package, and other hard materials -- would not cut normal ceramic bathroom tile. If I leaned on the saw blade hard, after about 30 seconds a tiny indentation would appear on the tile, less than 1/16" deep. That's useless. Perhaps it would cut other types of material -- I don't know. But bathroom/kitchen tile is a pretty standard form of ceramic that people want to cut, and this blade won't cut it.

This was mis categorised . This was not GLUCASAN -IMMUNE SYSTEM SUPPORT.

Coupe de céramique, aucune efficacité

Lo compré expresamente para la instalación de loseta de cerámica en mi cocina, se trata de losetas de grosor normal, NO es porcelanato ni ningún material más duro, y la cuchilla no pudo cortarlas. Probé con la caladora desde la velocidad más baja a la más alta disponible y de ningún modo pude hacer más que una muesca en la loseta, haciendo que la cuchilla se calentara muchísimo, por lo que desistí para evitar una rotura de la misma. Ya no la puedo devolver porque perdió la pintura negra que recubre el filo, así que la guardaré por si algún día requiero cortar algún material más suave. Muy decepcionante esta compra.

Solo fué un gasto, no realiza su función.