--- product_id: 90583534 title: "HATCHBOX PA Nylon 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm, 1 kg Spool, 1.75 mm, Black" brand: "hatchbox" price: "Rp3238634" currency: IDR in_stock: true reviews_count: 8 url: https://www.desertcart.id/products/90583534-hatchbox-pa-nylon-3d-printer-filament-dimensional-accuracy-0-05 store_origin: ID region: Indonesia --- # HATCHBOX PA Nylon 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm, 1 kg Spool, 1.75 mm, Black **Brand:** hatchbox **Price:** Rp3238634 **Availability:** ✅ In Stock ## Quick Answers - **What is this?** HATCHBOX PA Nylon 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm, 1 kg Spool, 1.75 mm, Black by hatchbox - **How much does it cost?** Rp3238634 with free shipping - **Is it available?** Yes, in stock and ready to ship - **Where can I buy it?** [www.desertcart.id](https://www.desertcart.id/products/90583534-hatchbox-pa-nylon-3d-printer-filament-dimensional-accuracy-0-05) ## Best For - hatchbox enthusiasts ## Why This Product - Trusted hatchbox brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Description Full description not available ## Features - About this item - 1 KG (approximately 2. 20 lbs.) Spool ## Images ![HATCHBOX PA Nylon 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm, 1 kg Spool, 1.75 mm, Black - Image 1](https://images-na.ssl-images-amazon.com/images/I/71Zb8Wn%2BceL.jpg) ![HATCHBOX PA Nylon 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm, 1 kg Spool, 1.75 mm, Black - Image 2](https://images-na.ssl-images-amazon.com/images/I/71VJpnpLwLL.jpg) ![HATCHBOX PA Nylon 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm, 1 kg Spool, 1.75 mm, Black - Image 3](https://images-na.ssl-images-amazon.com/images/I/81brNJlK7IL.jpg) ![HATCHBOX PA Nylon 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm, 1 kg Spool, 1.75 mm, Black - Image 4](https://images-na.ssl-images-amazon.com/images/I/712H%2B4Pbt-L.jpg) ![HATCHBOX PA Nylon 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm, 1 kg Spool, 1.75 mm, Black - Image 5](https://images-na.ssl-images-amazon.com/images/I/61zYc3P0OOL.jpg) ## Available Options This product comes in different **Color** options. ## Customer Reviews ### ⭐⭐ PA with Poor Thermal Properties *by M***E on Reviewed in the United States on January 12, 2019* I have had great luck with HatchBox PETG so I though I would give their PA a shot. I needed something a little less rigged but still had relatively good thermal properties. This filiment does print well. However this does not have the thermal properties you would expect from a PA due to the low print temp. The nozzle print temp is around 200 degrees. I did not realize this when I purchased it. I requested a data sheet from HatchBox to see exactly what the GTT is. Unfortunately their responds was "At this time we are unable to provide the Material Properties sheet for our filament". Not the answer I was expecting. You sell a product but don't provide the spec sheet for it?? So to tested the thermal properties by placing four printed parts in a 170F oven and brought them up to temp. One HB petg, HB pla, eSun PA, and this. This product was very soft and pliable. Worse then the pla. Not what I would expect from a PA. It does print well. But I would not use this in applications where the temp might be higher then where you would use a pla product. I'd be nice to see the true specs of this product. ### ⭐⭐ So far not impressed *by T***S on Reviewed in the United States on January 3, 2019* Let me first say that I have used many Hatchbox spools of 3D filament, most of which have been in PLA, ABS, and PETG. That was one of the reasons I purchased this particular product to begin with, I've traditionally had huge success with their filaments and getting good results.My printer is a Prusa MK3 MMU 2.0 for reference with several hundred hours of printing in PLA, ABS, PETG, and some proprietaries like wood, metal, etc.I purchased this particular product because I am printing a part that is rather large taking up almost the entire bed and needs to be both accurate and handle wear and tear as it is a mechanical part. After several issues with PLA and PETG warping just enough to cause problems, I decided to purchase this PA as it was recommended as a lesser warp filament.Product arrived just fine, typical Hatchbox packaging, however, I ran into an issue right away in that the box and the website description give two different setting recommendations, so I ended up trying both (and quite a few others). That's where it falls apart...literally. So far with all the settings set from both the box and from the website description I cannot get this filament to pass the first layer print test that is built in on the Prusa. This test for those of you who do not have a Prusa prints a very fine line of filament in a back and forth motion across the bed like it was navigating a city street to get somewhere. At the end it flips over to a back and forth touching pattern that leaves you with a "flag" of filament that is supposed to be consistent, sharp edges, and stick together and not pull apart. This test is really for adjusting the Z access to get the best consistency when changing spools and/or media so that the printer prints well. I have not been able to get past this test. When I print and using WIDE ranges of z-axis settings to make the layer thicker and thinner, I am getting literal bubbles/spittle coming out, almost like it's too hot...or maybe not enough? This in turn means that the line it's printing is more like dashes and is absolutely horrible from a testing perspective. Keep in mind, I have somewhere around 20 other spools of various materials in many other vendors, types, ages, etc. All kept in dry, nice conditions for printing. This one is fresh out of the bag so I'm pretty sure it's not moisture. I've tried various temperatures on both the extruder and the bed to no success.I'm not giving up on this yet, however, I have a strong feeling this is a rather new product and if they would just make the instructions more clear maybe there is an aha in there that will make this work well. if so, I'll modify my score, however, as it is, it's a 2 star filament to me. ### ⭐⭐⭐ Great intro to printing with Nylon, but a poor excuse for nylon *by R***U on Reviewed in the United States on January 10, 2019* Using an Anet A8 with E3d Titan Aero this filament is just a pleasure to work with. At a .1 layer height I have printed a few structural components and gears and have experienced no significant warping with a very beautiful part. I did build a full dry box before opening the Nylon and using it so it has had nearly no interaction with humidity.Edit: Came to downgrade my review, This filament is nice, but I am seriously confused as to of if it's actually nylon? I say this because AS stated I printed some structural parts from it and they seemed to be nice at first, but they started warping and at a lower temp than my PLA part it replaced. I printed the E3d Titan Aero carriage out of this and it gave out after a week. Wtf is wrong with this nylon? Its more like flexible melty PLA.If you want some cool feeling and looking black parts this is still a great filament, If you are looking for nylon for its properties you may want to stay away. --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.id/products/90583534-hatchbox-pa-nylon-3d-printer-filament-dimensional-accuracy-0-05](https://www.desertcart.id/products/90583534-hatchbox-pa-nylon-3d-printer-filament-dimensional-accuracy-0-05) --- *Product available on Desertcart Indonesia* *Store origin: ID* *Last updated: 2026-04-23*