SCITOO 10pcs Front Suspension Kit Upper Control Arm Inner Outer Tie Rod End Sway Bar Link Lower Ball Joint Fit 1994-1997 for Accord 1997-1999 For Acura CL

looks good

The only issue I have is that they don't have grease fittings for easier maintenance, but worked perfectly and fixed all my front end issues on my honda

Everything fit perfect. Installed lower ball joint with $6 pipe and cap from the hardware store so no need for a $200 press rental. Upper control arms are nice and snug but the hole for the cotter pin is a little low(as seen in picture) but should be fine. Also no need for tie rod tool for a 94-97 Accord bc it won’t work but a 19mm wrench does perfect just turn the wheel opposite way of the side you’re working on for extra room. Overall happy with the kit and we’ll see how it does after an alignment.

Works for 96 accord 🤘🏻

After just 6000 miles car started feeling weird. Took it to an alignment shop the following parts were found to be defective: Both upper ball joints. Both inner tie rod ends. Both upper control arm bushings. So complete failure. I'd like my money back, obviously this is after the return window and there's no way to contact the seller.

Eveeything fit to standard and my car works just fine.

Everything was good except the inner tie rods they were already apart when I received it

Missing both upper control arms and both lower ball joints. Which is practically half of the kit. Cheap parts which is expected but missing parts ruined my whole plan. My car is now jacked up with my old parts already removed. Note ; check box first