2Pcs Universal Car Coil Spring Buffer Shock Absorber Bumper Suspension Cushion for Vibration Dampening Noise Reduction Boosts Driving Comfort Kit Type A+-F Fits Most Sedans SUVs (C)

Work Exelent

I will say that it help solve my coil overs problem. Mb c320 springs are way smaller than factory springs. The adjustable sway bar link can on be extended so far without coming apart while driving with preload on them. The spacers gave the extra spring stiffness I needed to be able to feel safe driving comfortably. For me my suspension is super stiff but it’s a lot better than feeling like I am driving on hydraulics. FYI you will feel every bit of the road but the faster you go the less you feel the road and all you get is a little shaky steering wheel. Another FYI make sure you get a complete alignment. If your lowered make sure your even all the way around. It’s make a huge difference. I am 25 1/8 in the rear and 24 1/8 in the front. I am on 18x9.5 rear and 18x8.5 front. Tire size make a huge difference too. Front is 215/40/zr18 stretch and 245/40/zr18 rear not stretch. I am giving all this information because at two months on coil overs my suspension is finally tune right. Last FYI if your car is slam in the back no one will align the rear wheels unless you raise it at least one finger above the tire and camber correction will not be done unless you install adjustable camber bars front and back. Hopefully this helps someone.

This is for one spring not a set. You will need to buy a second one to finish the job to make it look like the pictures they show. Good product but advertising is misleading I had to buy 3 to do one set of springs on a Toyota Corolla not like it was a special job.

I’ll add photos later but these mofos saved my wallet!!!!! Yo if your lowered and the rear is bottoming out or want to raise it a few mm this is exactly what you need!!! I’ve never lowered a vehicle before, this is my first lowered car done by me, springs only on a 2010 challenger. Love the finished product but I have subs and tools and the rear sag slightly lower than the front no matter what bump I hit before adding the spring spacers you would cringe for the car like damn I felt bad for her. DO NOT TAKE YOUR CAR TO THE SHOP TO HAVE THEM PUT ON!!! They will claim they need to remove everything just to put them on and attempt to charge you about $300 bucks Texas tire gave me this ridiculous quota my primary shop said they won’t fit….. I was determined to have these on before I drove out of town, all I had was a old raggedy a** small jack that didn’t even lift the wheel off the ground at full height…!! With a lotta WD40 and some curse words I finally got both sides on!!!!! Long story I know but I’m a real person I am not a mechanic and all I had was a funky a** jack the will to get the job done and a lotta curse words oh and WD40 haha but hey saved $300 bucks the shops attempted to rob from me so do it yourself!!!! Ask a friend for a old raggedy jack you get pissed off enough you’ll finally get them on lol anyway I really love the way the car feels now!! Absolutely completely different a lot smoother and no more cringe from the rear bounce just feels perfect, stable I definitely recommend! Just buy it

Installed in rear 2006 Camry 10/8 very easy to install guess I measured correctly. Measured the car height and that stayed exactly the same but my ride quality is way better the rear struts are junk and it was like being in a boat the car was very bouncy before, these got ride of that

Installation was fairly easy on my 1992 Cadillac Brougham rear springs. I got the A and B types as I wasn't sure which would fit best, but A type ended up being the correct size. I found that running some rope through the hole on the end and then pulling on the rope through the spring made it easy to pop into place when it was stuck. They did help with sagging for, but only for a couple weeks, but the holes were definitely a weak point and they eventually collapsed.

These worked great to get rid of the bouncy ride my cheap maxspeeding coilovers gave me in the rear. I definitely recommend these to anyone dealing with bouncy cheap coilovers. Not the easiest to install when you order the correct size they fit as they should a little lithium grease helped they did lift my ride about an inch but worth it for the better ride

Once you get beginning on spring start putting tie straps to hold it on spring make sure spring is nicely lubed to where you want to slide it.My truck is lowered and I'm using it for a backup bump stop. Get tie straps they aren't included.It raised truck about half in after setting and no more hard hitting the bump stops,had 6 adults in truck and went over the speed bumps where it would normally hit bottom and no more worries,even on the highway suspension felt tighter and smooth not stiff, great fix especially on a lowered suspension and if you plan on towing a trailer.

كويسه

I purchased these spacers for my Toyota Venza so I could move my belongings across the country. I had only one option and could only do it in one trip. I installed 2 sets on my car, and it was perfect. Car and trailer were loaded. I traveled 3200km without a hiccup. Good stability, drove nice and no dragging. Thanks for a great product.

Put these in my 2023 Sportage SX PHEV and they fit perfect. Raised the back about 3/4 inch and reduced the super soft springs the factory supplies on these vehicles. Drives better and ride height is better. Considering getting another set to add because with passengers in back it's still too soft.

Facile et rapide d’installation mais je n’ai pas encore essayer avec un bon chargement. Le seul désagrément est que c’est bruyant, ont entend le sons du caoutchouc sur les coilspring a basse vitesse dans de gros trous ou entre de maison

Lo quería para Tsuru 3, para que no se sintiera tanto el camino, baches, hoyos, piedras, todo tipo de imperfecciones que hay en una carretera en mal estado.