StarTech 10/100Mbps Ethernet, USB 2.0 Network Print Server - Windows 10 - LPR - LAN USB Print Server Adapter (pm1115u2) Black

"L’objet reçu est d’une excellente qualité, conforme à la description et parfaitement fini. Très satisfait de cet achat." "Qualité irréprochable de la livraison : ponctuelle, soignée et professionnelle. Un service sérieux qui mérite d’être salué."

Debe ser bueno pero a mí no me sirvió para las impresoras

L'articolo è arrivato in anticipo rispetto alla data prevista. Era perfettamente funzionante ma ho dovuto restituirlo perché non aveva una funzionalità per me necessaria (ma l'ho scoperto solo dopo): mi serviva per collegare in rete una stampante multifunzione ma la fa funzionare solo come stampante e non supporta lo scanner.

I have a simple single function low cost printer. I don't need an All-in-one function printer and I don't need to print from a smart phone or tablet. I use a Dell laptop running Windows 7 with WIFI via a N300 Netgear WIFI router. I also have a single function HP Deskjet 1000 printer without any WIFI. I don't print much but I wanted a way to print without physically attaching my printer to my laptop. This product solved that problem. Basically you plug the print server into your router and plug your printer into the print server usb port. When you load the software on the laptop you are installing a second HP driver for your printer. Your original HP Deskjet driver remains and is an option if you decide want to go back to printing through your local usb port on your laptop. The new driver formats the print job to be sent over the network either via the laptop ethernet interface or via WIFI. It works very well. All I need to do is turn my printer on and I can print from my laptop while working in another room. The only complaint is that the StarTech Quick Start guide Software Installation instructions are a bit lacking (at least for Windows 7). Connect your laptop to your router. The basic install goes as follows: 1. Insert the CD. AutoPlay opens and shows a "Run Setup.exe" option (not Networking Printer Wizard). 2. You click the Setup option and it runs a StarTech "Networking Printer Wizard" that puts a "Launch Network Printer Wizard" icon (shortcut) on your desktop. 3. You click on that Launch ... icon and it opens the Windows "Network Printer Wizard". In that window you'll see your shared network printer listed. In my case it was HP Deskjet 1000 J110 series-P05d065f6a. That is the new print driver you are installing. Highlight it and complete the steps. 4. When you print, your HP dialog box will show printer selection options (both the original and network printer). You'll have to select the network printer each time or you can make it your default printer. Go to Ctl Panel-->Hardware&Sound-->View devices&printers: Right clk the network printer and select Default. StarTech.com should be able to tell you if your particular printer is supported.

De titel zegt genoeg, meer woorden moeten hier niet aan vuil gemaakt worden