TRUGLO Gobble-Dot Universal Turkey Gun Sight Set, Fits All Ventilated Rib Guns, Notched Rear Sight/Red Front Sight

Installed on a Rossi R92. The rear fit perfect. The front needed to be filed just a tiny bit. Vast improvement over the buck horn sights. The front barrel band has to be filed a tiny bit, in order to go under the sight. Or you can file the bottom of the sight. I opted for the barrel band. Update: Ran 50 rds, sights staying in place. Only needed a minor ajustment on the read. Use blue loctite for best results.

Fit perfect on my Glock 45

Time to update your old model 94 with some good sites. Careful on the rear site, the tiny screw for elevation adjustment is touchy, you have to go slow but once you get it she is dialed in at 200 yards or better. Also, if you are removing an original front hood sight make sure you are lined up as these guns tend to shoot slightly to one side due to the front sight mount base. Nevertheless, it sure does make it easier for us old guys to see the three dots. I like that red is in the middle of the two green, helps with centering.

This product worked very well for my Winchester model 94 as I had never liked the traditional steel sights. It was quite simple to fix this sight to the rifle as you will need a set of non marring brass punches and hammer. When sighting in your rifle I would suggest to start at a close distance and gradually work your way back. Another simple thing to keep in mind is when I had zeroed in for the wind age (left to right) move the rear sight very minimal in increments in the direction you want to go. Would definitely recommend! Going to purchase a set for my marlin 35 rem in the future.

The front sight is very good. It is made by Marbles Arms and is style number 45MR. It is steel and CNC made. The rear sight is very poor quality. It is made of aluminum and plastic. I do not know who made this part. The plastic part never saw a CNC and the dovetail looked like a flint knapped arrowhead. The dove tail should be smooth and strong to allow for windage adjustments. This damage to the sight had to be done at the manufacture. I removed the windage screw and slid the plastic sight out. It appeared like the dovetail was forced into the aluminum dovetail when the plastic was warm. Because large pieces of the dovetail was missing I doubt any windage adjustment would hold for long. I returned my order as defective. Marble Arms should be upset that their parts are getting repackaged with low quality products.

Worked great until the front site glow material fell off.

Easily installed. Easily adjusted. Made a huge difference on my Winchester 94. I can see the sights now!

Nice

MONTE SUR UNE NORINCO JW21 EN AJUSTANT LEGEREMENT LA MIRE.

Me lo quedo por qué no tengo más, pero la fibra es malísima, tiene demasiada abertura en el alza para lo delgado que es el punto de mira, además de ser curvada la abertura, estos dos factores hacen que sea muy difícil la precisión, por otro lado si consigues que la fibra se ilumine también están muy separadas, así que si quieres algo de precisión a más de 25 metros ni la compres.

Top Ware, gute Preisleistung. Immer wieder gerne.

these are as good as you can get without going the Tritium route. These mange to funnel the available light into a crisp clear sight profile. For rifles with lousy buckhorn gold bead nonsense these will improve your odds of a solid shot by 100%. these fit my Henry, Rossi, Marlin and my Dad's Pedersol and Cimmaron. They are not meant to be moved around but I mention this so if your are worried about fit, don't.

Mounted on my Chiappa Double Badger to replace the Williams factory installed that where fragile and never perfect. Those are just super! Made me fully satisfied with the combo rifle.