Deco X55 AX3000 WiFi 6 Mesh System - Covers up to 6500 Sq.Ft, Replaces Wireless Router and Extender, 3 Gigabit Ports per Unit, Supports Ethernet Backhaul, Deco X55(3-Pack)

We have a long house (4,000 sq. feet) and because my modem was at one end we have used range extenders to reach TVs and computers at the other end. My son works in sales from home and required a faster and more stable connection than he had in his office at the far end from my modem. We decided to install a mesh WIFI system and chose TP-link's Deco S4 (3-pack). Once up and running (easy) we weren't able to achieve a faster speed than the range extenders. Although, things were slightly better in coverage and stability. After reading a lot about do's and don'ts of mesh WIFI systems we decided to return the Deco S4 and get the Deco AX3000 X55 (3-pack) system. Here are the early results: 1. My son's speed more than doubled to 535 Mbps, which is almost the same speed I get being directly connected to the modem at the other end of the house. In other words the rated speed that our ISP sold us. 2. The TVs haven't buffered even though we use streaming exclusively on 3 sets. Plus we have mobile phones and other assorted gadgets that use the internet. 3. My wife's PC, even farther than my son's, is getting almost double the speed (145 Mbps) that it got with the S4 and triple the speed she received from the range extenders. 4. Very easy setup via the mobile app. Here are some of the reasons why the newest mesh system is better from a technical perspective: 1. The AX3000 is rated at double the speed of the S4 (at less than double the cost on Amazon using their coupon). 2. The AX3000 has a maximum of 6500 sq. feet of coverage vs. 5500 sq. feet for the S4. 3. The AX3000 is WIFI 6 vs. WIFI 5 on the S4. This means a 50% increase in "streams" providing greater functionality and speed because there are more paths to the base station router. One of the x55s (base station) sits next to our ISP's modem and the other two are set up as satellites at the other ends of the house. Satellites can be connect via ethernet cable (called a backhaul) if you have cable already installed in some rooms. This should increase the throughput. Unfortunately, we weren't able to do this. 4. The AX3000 is smaller than the S4 and thus doesn't stand out as much. This is not a technical issue, however we plan to mount two of the units on the wall with wall mounts that can be purchased separately. The S4 is almost twice as tall so may tip out of the mounts easier. Plus the cord and charger is white rather than black so doesn't stand out as much. 5. Other systems are faster and cover more area, but are significantly more expensive for a 3-pack. Also most use WIFI 6E, which we don't need because we're in a single family home. I understand WIFI 6E comes with those systems because it's good for people in large apartment buildings. It's not faster but does have a third band in the 6 Ghz range which WIFI 6 does not. Update: I have had trouble connecting our solar panel gateway to the new system. Our solar system installer suggested connecting to the 2.4 Ghz band because or WIFI is now mesh. I didn't know we had that capability until I read an earlier post by another happy user. I will now research how to do this.

In a world where a strong and reliable Wi-Fi connection is paramount, the TP-Link Deco AX3000 stands tall as a beacon of connectivity, effortlessly blanketing my 140-square-meter apartment with its powerful signal. This review encapsulates why the Deco AX3000 deserves its place as a frontrunner in the realm of mesh Wi-Fi systems, highlighting its exceptional signal coverage and unbeatable cost-effectiveness. As a Brazilian, I brought a mash system to Brazil, even though it's not sold locally. I'm quite satisfied with the features it offers and with the complete automation of my home. Having a reliable network is crucial to ensure the effective operation of all devices. Signal Coverage: 5/5 One of the most impressive feats of the TP-Link Deco AX3000 is its ability to deliver consistent, high-speed Wi-Fi throughout every nook and cranny of my home. From the living room to the farthest corner of the bedroom, the Deco AX3000 ensures a strong and stable connection, eliminating dead zones with remarkable efficiency. Streaming 4K videos, gaming online, or video conferencing – no task is too demanding for this powerhouse of a mesh system. Performance: 5/5 Equipped with the latest Wi-Fi 6 technology, the Deco AX3000 not only provides extensive coverage but also delivers lightning-fast speeds and low latency. Whether I'm downloading large files or engaging in bandwidth-intensive activities, the Deco AX3000 consistently exceeds expectations, offering a seamless online experience for all connected devices. With support for up to 150 devices, it effortlessly handles the demands of a modern smart home without breaking a sweat. Ease of Setup: 5/5 Setting up the Deco AX3000 is a breeze, thanks to the intuitive Deco app. In just a few simple steps, I was able to configure and optimize my mesh network to suit my specific needs. The app provides comprehensive control over network settings, allowing me to prioritize devices, set up parental controls, and monitor network traffic with ease. Whether you're a tech novice or a seasoned enthusiast, the Deco AX3000 makes the setup process hassle-free. Cost-Effectiveness: 5/5 Perhaps the most impressive aspect of the TP-Link Deco AX3000 is its exceptional affordability. Despite offering premium features and performance that rival more expensive competitors, the Deco AX3000 comes at a fraction of the cost, making it an unbeatable value for budget-conscious consumers. With the Deco AX3000, you get top-tier performance without having to break the bank, making it a wise investment for any home or small business. Final Verdict: In conclusion, the TP-Link Deco AX3000 is a true standout in the world of mesh Wi-Fi systems, offering unparalleled signal coverage, blazing-fast speeds, and unbeatable affordability. Whether you're looking to eliminate Wi-Fi dead zones, upgrade to the latest Wi-Fi 6 technology, or simply enhance your online experience, the Deco AX3000 delivers on all fronts. With its stellar performance and budget-friendly price tag, it's a clear winner in my book. Highly recommended!

We have a detached garage about 35 ft from the main house. With just the basic 3 part system, the coverage extends there no problem. We also live on a acre and have found our wifi phone works well even farther from the house. I definitely recommend. It was easy to install overall. I just had a few issues once I removed the existing router because I have a static IP. Once resolved, it worked seamlessly wired directly to the fiber.

I moved to a new place and wanted a new updated mesh (was using googlewifi) so i purchased this last year. setup was easy and many bells and whistles were easy to setup but once every couple of days the pods would lose connection to the main router for a moment then come back on. recently it was up to 2 or 3 times a day. the issue is that all the end points (firesticks, computers, smart tvs) would hang or disconnect. I play many online games and i would get disconnected; i would grumble and then relog and continue. yesterday my gf, while in her deposition job got disconnected and that was the final straw. I setup my googlefi and since then i havent had an issue -i dont endorse google products, it what i had on hand. in the time when i still had hopes for the x55 i updated the firmwhere, turned on/off beaming, tried roaming, setup to reboot every night, nothing helped. at this point i will never buy a TP-Link product again. update: i switched to my google mesh and while not as frequent i do get dropped connections still, so thinking its not the mesh but the cable modem. i will be updating the firmware on the modem and monitor on the goole mesh. if it stays stable i will switch this mesh in and monitor this. i updated this review to 3 stars since my issue might not be this mesh update 2: since troubleshooting the issue; which was the cable modem losing internet connection and not this mesh. so far it's been working without issue. giving it 4 stars since the one issue is when the internet goes down the whole deco wifi LAN seems to go unresponsive instead of just stating internet is down.

Highly recommended upgrade for those looking to increase their wireless speeds with several connected devices. I thought it wouldn't be much of an improvement over my DOCSIS 3.0 cable modem/router + Wifi extender, which appeared to be significantly throttling my bandwidth, but mesh Wifi is in fact different and more effective at extending range and providing speed consistency throughout the home. Why I purchased: I decided to try a mesh network as we were having some issues with streaming video quality, such as blurry/pixilated picture on our streaming TV, or buffering/loading on tablets or other devices playing video. A couple suspected reasons for these bandwidth issues were ethernet connected computer(s), use of a Wifi extender, and/or a Wifi security camera at the extent of the Wifi signal range that were reducing the connection quality of the other devices mentioned. Improvements after installing: One main issue I was seeing was an outdoor security camera that had a weak signal was having trouble staying connected. On my smartphone, I also had trouble staying connected to my Wifi when standing next to the camera outside. After installing this system, I have a strong signal throughout the house and near this camera, and speed tests indicate a much faster connection speed than before. There was a +50 Mbps jump in the upstairs far corner of the house. The security camera also remained connected much more reliably. I thought that it wouldn't be possible to still get a great signal across the house, figuring there was no way connecting through a satellite would provide any kind of decent speed, but it does! My understanding is that the software for this system is able to appropriately manage consistency of connections (through all connection points), so there is in fact an advanced capability over older routers to keep speeds high regardless of distance from the main router. Setup: Installing this system took less than 10 minutes to be fully up and running - very easy plug-and-play. May take 20 or 30 minutes for someone not as savvy.. but between the app and the automatic connections between the routers, it couldn't have been easier, and very difficult to mess up. Simply connect an ethernet cable from your modem to the main router (each of the 3 units is the same), connect the power cable, then download the app on your smartphone. In the app, after some brief setup steps (includes creating an account), the main step is to connect to the router through the on-screen prompts. From there, you can name your wireless network and password. Connecting the other 2 satellite routers: Place them within a reasonable distance from the main router (~20-30 feet/1-2 rooms away), then plug in to power. Wait ~2 minutes and done! The whole system was live and wirelessly connected through the main router. I couldn't believe it. In my relatively square-shaped house with the main router on one far side, I was able to place the 3 routers in a triangular pattern, where both satellites are about equal distance from the main router in the middle of the house (about 20 feet each). If your router is in the middle of your home, you may want to place the satellites at either end. I believe a daisy chain (main router at one end like I have, then 2 satellites in a line across the house) is also an option for larger, more expansive homes to maximize the range. I didn't test the daisy chain, but I'd expect diminishing speed at the far end (although one may be surprised based on my observations so far with the management of the traffic at farther distances). While at the far end of my house and running a speed test, I can't tell that I'm not connected to my main router as the speed is still very good. The daisy chain may slightly differ, but can't say for sure. 2.4 GHz vs. 5 GHz networks: Wait, you don't need to set up 2 different networks?? The app basically eliminates all complexity over traditional router setup apps, making the setup choices totally accessible for anyone of any networking skill level. In the app, there is an option to broadcast 2.4 GHz + 5 GHz, 2.4 GHz only, or 5 GHz only. I remained on the first option as I needed support for 2.4 GHz-only devices. Otherwise, 5 GHz would be fine and preferred for everything (supports faster speeds). Apparently, the single network name/password automatically creates a dual band setup, if choosing both. Devices that connect apparently are favored to the optimal band - frankly, I don't know the details there, but would assume 5 GHz connects first over 2.4, unless only compatible with 2.4. Refurbished vs. New: No difference here. If you want to save a little money, refurbished is a good option for you. The box came with everything in it including an ethernet cable as if it were new. As far as condition, there were a few scuffs on the units, but nothing terrible. I could almost rub off any blemishes. I'm not looking at them anyway. Overall, highly recommended for those looking to make the leap to a mesh network, or debating whether mesh is just all hype (it's not with this system).

Thanks to Prime Day it was time for me to finally upgrade my home network. I was looking for a reasonably priced WiFi-6 mesh system with 3 stations (1 main + 2 satellites), at least AX3000 speeds, and a price tag of up to $300. It came down to two choices: the Eero 6+ and what I chose instead, the TP-Link Deco X55. Both systems had similar specs, but I liked how the TP-Link Deco had 3x Gigabit ethernet ports per satellite (the Eeeros have just 2). That meant I could wire each satellite in a daisy-chain configuration for a wired backhaul AND connect the 3rd ethernet plug to the gigabit switches I had at each satellite location. This meant that all of my hard-wired devices could stay hardwired, while adding mesh WiFi at full speeds (no bandwidth reserved for transmission thanks to the backhaul). Installation was quick and easy - I simply turned off my cable modem, disconnected my previous router, installed one of the Deco X55's in its place (in my bedroom), and turned everything back on. After downloading the TP-Link Deco app I had an internet connection set up and good to go in less than 5 minutes! Once that was working, I added the other two Deco's into the mix - one in the living room and one in the family room - with all three forming an almost perfect triangle for whole-home coverage. In less than 15 minutes after opening the box, I had a fast, Wifi-6 mesh system in my home. I had been using an older AC1900 router for almost 10 years now and back then it was just fine - but with more and more smart home devices being added to my home, it no longer was enough. I have a medium-sized amount of smart home devices (around 50 devices including hubs) and on occasion, I'd experience signal dropouts on some of the farther cameras, and other devices would sporadically go offline/online at random. With the X55 mesh installed, all of my issues disappeared! My smart cameras used to show a signal strength of between 80% (indoor cameras) down to around 55% (outdoor cameras). With the TP-Link Deco mesh in place, the signal strength changed to 100% indoor and 95% outdoor - a major improvement for sure. Pulling up live and recorded footage from the outdoor camera is so much quicker now. All of the other indoor smart devices I have all show 98-100% signal strength. Needless to say, this was a definite upgrade! As for my rating, I give it a solid 4-stars. There are a few small details that keep me from giving it a full 5-stars: some missing features that I had with my old router. One of them is being able to bulk reserve IPs by entering them into the app beforehand; with the TP-Link Deco, the device has to be connected to the network FIRST (with whatever DHCP IP address the Deco gives it), then you have to go into the app to reserve it with a static IP. I would rather have the more common table where you just enter each Mac address, static IP, and device name and it's done. Another missing feature is being able to have at least 2 separate SSIDs (not including a guest SSID). With the Deco you can only have one main SSID and one isolated guest SSID. Finally, to see some speed numbers I ran speed tests using both fast.com and speedtest.com, and the day before installing the mesh system I had an average internet speed of around ~260Mbps. The day after I installed the TP-Link mesh system my speeds went up to well over 490Mbps! Downloading is a lot faster, and streaming is super snappy as well. So in the end, I am very happy with my purchase of the TP-Link Deco X55 Wifi6 mesh system. Aside from the small feature complaints above, everything is awesome! I no longer have devices going offline/online. My internet speed has almost doubled (my old router was the bottleneck!) and streaming seems quicker as well. If you are looking for a mesh system to upgrade your current home network to the current WiFi6 standards, I would say that this is definitely a good buy! ------------ EDIT 02.18.2024: TP-Link Improvements Are Awesome! TP-Link has been steadily pushing out Deco firmware and app updates, and my -1 star complaint no longer exists thanks to two added features that completely address my complaints: - CUSTOM IP RESERVATIONS First, I don't have to play the game of connecting a new device, letting the Deco assign a DHCP address to it, then having to go back into the app to manually change the reserved IP. Now I can go straight into the Deco app and under the "Address Reservation" tab I can now select "Custom"; this brings me to a page where I can manually type in a MAC address AND the local IP address that I want to assign to it - without having to connect the device first. - SEPARATE IoT NETWORK My other complaint was that I only had the option to have two SSIDs - one main and one guest network. I wanted to be able to configure another SSID specifically so I could group all of my Smarthome devices, and after a couple of firmware updates later TP-Link not only gave me that option, but an even better one: they added a dedicated Iot (Internt of Things) network! Not only does this group my sparthome devices separate from my main network, but it also restricts communications between networks so that the IoT devices stay isolated. This is exactly the feature I wanted them to add during my initial review. - VPN COMPATIBILITY TP-Link has also added the option to use a VPN (server or client) directly through the router, as opposed to having to VPN each individual device manually. Furthermore, the VPN can be assigned to the network in two ways: either all devices (every device connected to the mesh will go through the VPN) or I can select specific MAC addresses that must pass through the VPN before reaching the Internet (tI chose option #2). With this I can make sure that certain devices that like to "call home" can only do so through the VPN, helping to protect my network and privacy. All in all, TP-Link has done a great job at supporting these devices, and their ability to add additional features over time have made me feel confident to revise my initial review now give this system a worthy 5 stars!

Great system. Easy setup, no problems at all connecting it to my cable modem or configuring the 15+ devices in my home. Firmware upgrade was very smooth and without any issues. App is well designed and makes it easy to manage devices and enforce blocks or parental controls if desired. Initial comms from the deco to the app is via Bluetooth, but then once you configure your WiFi network its all WiFi from that point. The only hassle i had was with google/nest devices but that has nothing to do with tp-link at all. Easiest path for those is remove them, factory reset them, and add them as new.

My husband spends a lot of time in the garage and recently mounted a smart tv on the wall. WiFi signal is dismal out there so the tv didn’t work most of the time. I did some research before deciding on a mesh system versus a less expensive plug in WiFi extender. Based on the performance in reviews, I believe the mesh system is worth spending a little extra for the better coverage. The hardware was fairly simple to set up, one deco is connected to the modem and the other is strategically placed in another part of the house. The app walks you through establishing the secure network. The streaming capability is improved in the rooms farther away from the router (1600 sq foot house) and into the garage and outbuilding behind the house. The garage tv works consistently with fantastic wifi signal now. I’m pleased with this system and would recommend it.

Good

Keeps disconnecting from the . unstable operation. I returned 2 of them, got stuck with one because I lost the box.

Much better than my BT extenders!! Was easy to set up and install and the network is much more stable now. Was recommended by a friend and can't fault the mesh network!!

Estaba dudando si usar o no una red mesh, pero realmente fue una gran decisión, el x55 me sirvió perfecto compré el nodo en buena oferta y me solucionó mis problemas de conexión, automáticamente se habilitó el protocolo wifi 6 y ahora lo puedo usar tanto para mi computadora de trabajo como para la de jugar, celulares, Alexa, cualquier cosa Es una maravilla la app, lo recomiendo para México, si tienen Telmex con fibra óptica, les va a cambiar mucho la conexión

He venido empleando desde la pandemia productos de 2 y 4 antenas, los tipicos rompemuros de Steren y la verdad no tienen nada que ver con este producto en el sentido de instalación, estabilidad y cobertura. Debido a mis necesidades, confundí la cobertura con la velocidad de internet contratada, al ver que no llegaba a todos los rincones de la casa incremente la velocidad del contrato de internet y seguía el problema en las habitaciones mas alejadas del modem (mi casa es de 110 m2 de construcción y de dos plantas, el modem esta en la esquina de la planta baja). Teniendo una velocidad de 200 mbps pegado al modem, en la segunda planta en el otro extremo del modem medía 8 mbps y con oscilaciones. Adquirí el paquete de dos antenas de este producto, uno de ellos lo conecté con cable ethernet al modem y el otro lo puse en la segunda planta, en el centro de la casa, con lo que recibí 190-200 mbps en toda la casa. Y me di cuenta que para mis necesidades está sobrado por lo que solicite bajar la velocidad de contrato a 100 mbps que me resultan excelentes para mi contrato de 4k de Netflix y para las tabletas de los niños (juegos y videollamadas), para el internet de trabajo, etc. Solo puedo decir que ya ni me acuerdo de ese tema porque todo funciona a la perfección. Lo recomiendo mucho.