BIQU CryoGrip™ Pro Glacier Panda Build Plate for Bambu-Lab A1 Mini 3D Printer, Double Sided Fine Texture Spring Steel Sheet, Strong Adhesion, 184x184mm, 1 Piece

プレートへの食いつきが抜群でプリントミスがほぼゼロになりました 逆に食いつき過ぎて剥がすのが大変ですw

youtube等で言われている通り、剥がれに強いというか強すぎる！くらいです。 あまり大胆な設定変更はしていませんが接着力の強さから安心していろいろと試すことができます。 1枚は持っておいたほうが良いプレートだと思います。

PETGにとても良いです。 きちんとくっつき ちゃんと冷やせば剥がれる。 問題は、公式のプレートの方が安い。 品質はよいですが、公式ほどでもなく高い。 本末転倒。

とってもよく着きます。剥がすのが大変なくらいです。小さいものは剥がしにくいです。大きなものであれば安心してプリントできます。40°でも充分です。

失敗が減った

とても良く定着します サポートの一層目や、ブリムは爪で引っ掻いて取るのが困難なくらいです 接着面はスムースプレートに比べると若干ザラっとしますが、テクスチャープレートのような模様が出ることはありませんでした

非常に強力に密着します。 しかも pla だと温度が低く設定できるので、プレートを触ってもほとんど暑さを感じません。

I’m really impressed with this plate on my A1 Mini. Adhesion is excellent, and I haven’t had a single print fail due to bed issues since switching to it. The surface grips well, especially with PETG — almost too well at times. For PETG, I usually need to warm the bed slightly after the print finishes to help it release cleanly. The plate stays flat, heats evenly, and gives consistent results across multiple materials. For the price and performance, it’s one of the best upgrades I’ve made to the A1 Mini.

This plate has been amazing. Was having some issues either my original plate on my Flashforge AD5X after a few months so I threw this on and problem of bed adhesion were gone. PLA sticks great at around 40c bed temp and so far every has come out perfect. Almost sticks too well at times. Also I did the full calibration on my printer after installing and I fully expected to have to adjust the z height but even that worked out same as default. So far I have had no issues and would highly recommend if using PLA and PETG filament. The only drawback I can see is not being able to use IPA on it but it appears that the plate doesn’t need to be cleaned too often. I have printed on it every day for about two weeks so far and still going strong. Definitely worth the money. Just make sure to buy the right size for your machine and it fits right on the magnetic bed.

This was the solution to all my problems!! I got my kids a Flashforge Adventurer 5M for Christmas and prints kept coming off the build plate no matter what I did (yes I tried adhesive glue, hairspray, cleaning the plate). After realizing the stock plate was trash, google told me to give this one a try. It came in this morning and I am AMAZED!! I was able to print EVERYTHING that failed on my previous build plate, whit this one with zero issues! Prints adhere to the plate in a manner that ensures it won’t come off during the print, but releases with a little effort. For what my word and experience with a trash build plate is worth, this one is worth every penny!

I have two kobra 3s and one of them had a z-axis calibration issue which caused it to remove all of the top textured of the original build plate in a 2" diameter circle, so I needed a replacement build plate. I had been reading about the cool plates so I decided to try this one (CryoGrip Pro Glacier). I was really interested in not having to use any sort of bed adhesive, like glue sticks. I hate having to remove the glue stick residue from the prints, it's not hard, it's just a pain. When this build plate arrived, I immediately put it on the printer and printed a benchy, because it's fast and I knew what to expect from the printer. It printed great, no bed adhesion issues. I've used this plate daily for almost a month and I have not had a single print failure due to a bed adhesion issue. The models just stick to it. As a matter of fact, they stick almost too well to it; I've had to start using a metal scraper to remove some models (gently of course). According to the instructions, the bed temperature should be between 45 and 55 degrees C for PLA and the default temp for pla on the kobra 3 is 60. It's easy to adjust the bed temp on the kobra 3 and I have managed to change the default temp to 45; however, the default doesn't stay at 45 for more than 3-4 prints before it's somehow back to 60. So I just try to make sure it gets changed to 45 every time. However, sometimes I miss it and the temp isn't adjusted the bed temp is 60 the whole time, I haven't found that has had any impact on the quality of the prints. This plate is textured, however, it is finely textured, it's not quite smooth but it's pretty close. There is a very noticeable difference between the feel of models printed on it versus those printed on the textured plates. I'm very happy with this plate. I actually ordered a second one about two weeks after I ordered the first one. These are now my go to build plates.

Works pretty good. Fits the FlashForge AD5M / Adventurer 5M. Seems best suited for PLA and ABS. Stickier filaments such as PETG or TPU adhere too well and will likely damage the plate very quickly. Prints do NOT automatically release from this plate like they do with a powder coat textured PEI sheet or a smooth PEI sheet. It is more like BuildTak or what came with the Ender 3. It's still best to heat your bed up but you can use much lower temperatures. PLA will print no problem with no heating, ABS will print okay at 90° rather than 110° This would be great for use with: PLA, ABS, ASA, HIPS, Nylon, Polycarbonate. I wouldn't necessarily use this with: PETG, PCTG, TPU, TPE, Polypropylene