Ronlap Workbench Caster Kit, 880lb Capacity, 3" Extra Heavy Duty Retractable Casters 4 Pack Side Mount Adjustable Table Step Down Casters

Everything in my workshop except my lathe, is on casters, that includes my Milling Machine. My 44"x80" bench is now that last piece of equipment to has the ability to roll into a new position if needed. I designed and built my workbench in my shop while working on a Star Trek the Next Generation so it can travel to the next location or job site with ease. The bench was always intended to have some sort of caster system but not one where it rested on the wheels all the time. The selection of this casters system was specific to the weight the bench carries (ie; Oak machinist tool chest at 300lbs, surface plate at 60lbs, bend/brake at 60lbs, lower self storage at 200lbs, the bench itself at 80lbs and whatever tooling or work that is on the bench at the time). According to the specifications of the casters, I am at the casters limit, yet when I engage them and roll the bench about the shop, it floats like a breeze. The assembly and installation was super simple but I "did not" use the supplied screws to mount the caster plates to the bench legs. Instead I drilled the legs and used 2 1/2" 1/4-20 bolts with lock nuts to secure the caster plate to the legs. Wood screws always give out eventually, so with the weight of the bench and the load it carries the last thing I would want is a caster to give way while it is moving. The supplied hole pattern guide was very helpful to make a jig for drilling the holes through the leg, so if one uses the supplied screws, the guide is super handy to set the height of the screw pattern every time. The best thing to remember when installing this system is to install the main plate first, then the hinge pieces with the wheels. If you are disabled like I am and are going to use the 24 bolts rather than screws, the best way to install is the assemble the plate to the hinge pieces, mount to the legs of the bench and install the wheels last. Another small tip is to use "CAR WAX" in the areas where the hinge arm meets the caster swing arm to reduce friction. It makes engaging and then retracting the casters much easier. For the fantastic price, and the good construction of this caster system, I was extremely impressed with the quality, easy of installation and the tooling supplied to help attach the actual caster to the swing arm. If you have a bench that you need a caster system for, this is the choice to make.... period. Note: Once the casters are installed and engaged, be sure to check the stability of your bench legs. If a bench leg or legs seem to wiggle/sway where it meet the bench top as it moves, you need to brace the legs with an angle bracket of some sort as I did to avoid the legs collapsing.

Can't fault it

Used them for moving woodworking machines up to 400 kg

Solide e molto resistenti

Ces roulette sont de facture solide et facile à installer. Je les ai installés sur mon établi afin de pouvoir le déplacer facilement, et le system de levage de ces roue est super pratique. Je vous les recommande !