Wire Connectors, 12 Pack Low Voltage Wire H tap 2 Way connectors 2 Pin solderless with no Wire-Stripping Required for Mid-Span Branching in Wires Connection 20/22 AWG Cable 0.2-0.5mm², by brightfour

works great for the small wires I need to connect

These are ideal for connecting small wires. I bought them to connect wires together when doing an electrical job on my car. Car wires are small and I originally used block connectors with small screws but was concerned about whether I would get a good connection or whether the wires would come loose. With these connectors you don’t even have to strip back the insulation. You just push the wires into the connector and close them up. They are also small and unobtrusive and grip the wires tightly. Couple of tips. Make sure you push the wires into the connector as far as they will go and you will need to close the connector gently nipping it with a pair of pliers.

They were too small for the wires i have used They are tinier than I imagined and I could not use them.

I have used these type of connectors before they are much neater than the spade and bullet types of connectors. Theses are smaller and neater than others I’ve used in the past. The only downfall with them is if you like me and have no feeling and very little grip they can be fiddly. You have no messy little wire tubes to pick up and throw away as there is no wire stripping involved. Just open the little clear door push your wire in the 2 holes, close the door and your finished. If your not very strong to do it with your fingers just use a pair of pliers and everything will lock into place. To test pull wires and they will be trapped in the connector. Now that you can get a t version at well it means it’s easier to add Spurs and look much better than the 3m connector. They are well worth the money.

These look good and work fine once in place. However, getting them in place is not a trivial task. It is not immediately obvious that the side wire is inserted in a different way to the main wire (it fits into a loop in the transparent casing). It can be difficult to see if the side wire is inserted properly. It is very hard to click the covers fully into place once the wire is in place, you may need to use pliers to do so. If you are working behind a panel, or within an enclosed space, these problems are even greater.

Used these when adding some led lights to the cargo bay of my van and they've worked really well. Easy to use and the connections are still trouble free several years later.

i have got a good few orders of these, good bit of kit.

Used these to fix some LEDs into the back of my van. Simple to use. Order came before estimated date.

Superschnelle Lieferung, genau was wir wollten. Einzig beim Einklemmen ist Vorsicht geboten, man braucht etwas Kraft und muss aufpassen, dass die die kleinen Klemmen nicht abbrechen.

Super erfinde ! Haben in der Küche die Decke abgehangen und mit Strahler bestückt und dafür die t-Verbindung genommen einmal frei . Einfache Handhabung

Molto semplici da usare, la plastica è sottile ma resistente. Ottimi per cavi molto sottili, se aumenta il diametro diventano più duri da chiudere.

Articolo perfetto x lo scopo pratico e funzionale. Come da descrizione. Fantastico

vraiment satisfait de ces connecteurs ! j'ai réparé le faisceau de mon véhicule que j'avais malencontreusement sectionné en installant mon attelage. je recommande à 100% et je passerais une autre commande prochainement !