Creality Ender 3 Series Printer with Direct Drive Extruder, CR Touch Auto Bed Leveling, Dual Z-Axis for Smooth Printing, Silent Motherboard, 220×220×270mm Build Volume (Ender 3)

Not the fastest, but print quality is just fine inside a heated enclosure so cool air drafts don't mess up prints. Exactly as I expected after seeing my friend's more expensive version did better prints from inside an enclosure. I bought PLA and ABS filament, and the PLA is good without needing the enclosure, in a warm room, but an enclosure does help it do better. ABS requires a heated enclosure unless you live in a hot desert, as expected. Very reliable and easy to use. No clogging. Prints come out accurate, with a nice finish. Can't speak of durability this soon, but I would bet money that I will find it durable eventually.

Super amazing value and super easy operation (I recommend Ultimaker Cura slicer it's way better than their own slicer) print quality is great and I love how upgradeable it is. I used an ender 3 for 4 years (using it pretty consistently for my 3d printing business I run selling 3d artwork and pushed it pretty hard at times and it made the whole cost of the printer back) before I ended up replacing it with an ender 3 s1 pro because I love the ender series so much and wanted an upgrade plus it had some parts needing replacement (I could have replaced the parts for cheep but it was an excuse to upgrade) If you're looking for a basic 3d printer to get started this one is perfect for you

This was my first 3d printer that I decided to go with due to reviews and successful builds. I was excited to give it a try since I have been using laser and cnc machines for years, it seemed like the obvious next step. While many seem to have luck and positive things to say about this printer, I do not. I settled on this printer due to a bunch of research and forum surfing, to make sure I wasn’t going to buy some piece of garbage. While reviews are helpful, some don’t do things justice. Upon opening the printer and working through the parts, it seemed very straight forward and everything seemed to be of good quality. I had watched and read numerous sources for the assembly so it went quickly and was only a few steps. After getting everything set up, according to multiple sources and Creality, I was excited to get my first print going so I leveled the bed meticulously, got my settings all together, and went to test print a factory provided print. Nothing. Reset settings, trouble shooting from Creality, forum checking. Nothing. I spent two weeks trying to get this printer to work. Not one print the whole time. The printer would not recognize the z axis and would fail to print, even after bed leveling, pre heating and using factory prints. I even disassembled the unit and went through each step again to make sure I didn’t miss anything. Bubkis. I eventually gave up on it and returned it. I bought my runner up on my list of printers, the Flashforge 5m and had it assembled and printing in half an hour with no problems. 20+ prints later and still going. Don’t waste your time with this printer. Go with another brand and save yourself the headache. There are so many out there, I’m sure you will have better luck with a different system.

I'm writing this review after a long first day of printing. I'm pretty happy with it, honestly. This is great value. After having built a larger but remarkably similar printer from scratch, I'm also not convinced they're losing money on it. So at least this isn't a case of Chinese dumping. It's simply a good product at a fair price, for once. My first two prints came out looking fantastic. The provided white PLA wasn't enough to complete the dog model, but my somewhat old and probably wet yellow PETG printed just fine as well. Adhesion was quite good on the provided print surface. Obviously, your results may vary. I don't know how good their quality assurance is, but most Chinese manufacturers seem to struggle with it. It could be that I got one of the good ones. The rails aren't bent, the belts are intact, the steppers all work just fine. The electronics are noisy, though. Given the price, this isn't surprising, but it is something most people will probably want to upgrade. Going with something with TMC2208 or better stepper drivers will almost certainly solve the problem. Overall, I'd say it's a good printer for beginners, but not if you're a buffoon or just not mechanically inclined. Learn how to tune this in, and it'll serve you very well. Ultimately, I gave this four stars instead of 5 because of the noise issue and because the manual doesn't mention the single most important detail for making this printer really shine: adjusting the delrin wheels. Since the manual doesn't mention it at all, I'll give a quick explanation here: the delrin wheels that form the linear bearings for this printer need to be properly tensioned. Do _not_ expect the factory setup to be anywhere near correct. Even if they got it perfect, the shipping process can knock them out of alignment again. The printer comes with little wrenches just for this purpose, so use them! On each set of wheels on the X and Z axes, there is one wheel that is mounted on an eccentric spacer. You can identify it because it has a hex shaft instead of a round one. The larger wrench in the kit should fit this hex. If you turn it, the wheel is pushed slightly inward or outward because it's mounted a little off-center from the bolt hole. This is how you adjust the wheel spacing to make the bearing tighter or looser. You should make it tight enough that you can't feel any play when you try to twist the bearing set, but not so tight that it's difficult to make it roll along the rail. You shouldn't be able to turn the wheels against the rail without the whole thing moving along the rail too. If you still have trouble, take your printer apart again and make sure the ends of the rails weren't damaged in shipping, causing them to not mate up squarely. Since the rails are aluminum, it's relatively easy for the sharp corners to be deformed from minor bumps. If the corners are deformed from impact damage, you should file/sand the deformity off so that the face of the end of the rail can mate flatly against the side of the rails you're bolting them to. If your rails are bent, you'll have to take that up with Creality. There's a warranty for a reason, and that definitely counts. If you aren't sure if your rails are bent, take two of them and place them together lengthwise. Rotate one of them 90 degrees a few times, checking if you can see light coming through between them. If you can, at least one of them is bent. Get a replacement. You spent money on the damn thing, make sure you get what you pay for!

Before starting your first print Level the bed (it comes slightly unleveled) Measure the correct amount of Esteps for the extruder. Mine was slightly under-extruding. (Calipers are recommended) After watching plenty of videos on the Ender 3's print quality, I decided to buy one. Out of the box the bed comes a little unleveled so leveling is required (no matter just release steppers, take a piece of a paper and raise/lower the bed until paper catches). My machine came with the newer with the 32 bit board and comes with a bootloader for easy firmware flashing, no Arduino needed just load .bin onto SD and turn on the machine and flash. The first thing you should do upon receiving the printer is checking the bed is level. A nice way of simplifying this process is to flash a brand new Marlin firmware with manual mesh bed leveling enabled (which is a great option if your bed came warped. The wonderful thing about the ender 3 is that it is so common, there are plenty of modifications that can be made since the community for it is huge. A BLtouch is a mod that people put to automate the bed leveling process. Once you get this printer you're gonna feel like purchasing many upgrades for it. The printer does come with a loud stepper driver so if you don't want to hear whirring and beeping for hours on end place the printer into a room or buy Creality's 4.2.7 board with silent stepper drivers or SKR Mini E3. As for overall print quality, it takes a couple of prints to tune in the settings making this printer a great first printer for starters however it does take a decent amount of time to level the bed and get settings right. Finally, buy a raspberry Pi 3 or better and webcam for OctoPrint. Essentially, it allows your printer to have WiFi printing capability among other tools like WiFi monitoring. notifications via Discord and timelapse snapshots. Octoprint is truly an amazing piece of software and if you have this printer, use it!

Watch the third-party free YouTube on-line beginner videos BEFORE building. The included assembly sheet is VERY confusing … and I’m an engineer! The videos make good points about how extremely important it is to make sure the printer’s frame is absolutely square in all three dimensions. Just gradually tightening the bolts in a rotation (like when tightening the bolts/nuts on a vehicle wheel) isn’t good enough. The Z limit switch mounting bracket has a nub on the left front corner (looking from the front of the printer). Some videos say to clip it off (e.g., with diagonal wire cutters or heavy-duty shears), which is the only way that I could get to perform the bed “leveling” process. The process actually positions the bed parallel to the X-Y plane of the printer’s frame (left-to-right, and front-to-back). Some people mistakenly try to use a carpenter’s level to “level” the bed, but if the printer isn’t sitting on a perfectly level table/bench surface, and the bottom of the printer frame isn’t exactly parallel to the supporting table/bench surface (not likely), a carpenter’s level won’t be of any use. Threading the printing filament past the gripping feed rollers and into the white feed tube to the print head is very tricky. Some videos show that it helps to unscrew the brass fitting attached to the feed tube and get the filament to protrude out of the right side of the feed mechanism about an inch (25 mm), then screw the brass fitting back into the mechanism after pushing the fitting over the protruding filament. That makes it possible to get the filament into the feed tube - I couldn’t have accomplished that step without that hint. Getting the end of the filament into the hole beyond the gripping feed rollers was extremely frustrating, as the hole is impossible to see, even with bright lighting, as the hole passes through a black plastic housing behind the very close rollers. The menu items are somewhat different on my printer from any of the manual versions (included on the USB thumb drive, on the Creality.com site, elsewhere on-line, or what’s shown in the videos. I was able to guess that the Motion menu item was what had to be selected from the main menu in order to get to the Auto Home and Disable Steppers menu items, needed to perform the “leveling” steps. Once I had stumbled through the assembly sheet, then discovered the YouTube videos and done things right, printing was pretty straightforward using the built-in micro-SD card reader. I haven’t been able to scale a model down in the included Creality subset of the free, open-source Cura “slicing” software. The provided gcode files print just fine, but not the .stl files after scaling and saving as gcode files. The printer only displays and prints from gcode files that the slicing software generates from .stl (3D Object) files. I’m trying to resolve this issue via on-line searches and forums.

Love this printer

Let me start off by saying that I am an educator and that I have been using 3D printers for the last four years. We wrote a grant at my school and purchased 2 printrbot simple metals and 4 printrbot metal plus printers. They range in price from $699 - $1100. I assembled two of them and they were very somewhat difficult. I ordered the Creality ender 3 to have something to mess around with at home and see if it would be something that I could really push to be used in the classroom because of the price difference. I have ran this printer really hard for about two weeks now and I am very impressed. The assembling was really easy. It took me a little over an hour. I watched a youtube video that made the whole process very easy. The quality of prints I am getting are just as good as the printrbot and it seems to be a little faster. I really like not having to use painters tape to get prints to stick to the print bed. I also love the option of being able to take the top layer of the print bed off and pop the prints loose. That is an awesome feature. The bed leveling was tricky at first but once I watched a video on it, it is not a problem. It is a little warped on one corner, but the prints still cover off very accurate. I do want to upgrade to the glass bed to see if that makes any difference, but I do not feel at this point it is a necessity. I will be talking to my administration soon to discuss purchasing several of these printers to have in our school. Thank you for making an affordable printer for everyone that gets the job done and has a pretty big print area.

Excelente equipo. El ensamble es bastante intuitivo y con ayuda del manual lo llevas bien. Desde la primera impresión salió excelente.

I bought this printer as well as the Prusa Mini+. Surprisingly, this printer turns out to be easier to manage and comes up with better and nicer prints. The Prusa Mini+ had some initial teething problems - particularly pertaining to prints being dislodged as it was not sticking to the print plate. I used glue-stick and finally decided to use 90% IPA alcohol solutions, which eventually worked. During this time, the Creality became my most reliable 3D printer! This printer was certainly worth more than the price I had paid and I would recommend anyone who is interested in 3D printing to get one! I absolutely didn't regret making the jump - even though I heard horrible stories about support for this printer.

価格に比べて非常にクオリティが高いので満足です。梱包も完璧で開封時に何の心配もありませんでした。組み立てに必要な工具はすべて同梱されていました。テスト印刷用のフィラーも少しだけ同梱されていてありがたいです。 microSDカード（説明書とスライスソフト、ドライバ入り）がＵＳＢアダプタにセットされた状態で同梱されているので、同封されている紙の説明書ではなくまずはmicroSDの中のＰＤＦの説明書を読みましょう。こちらに組み立ての詳細説明が日本語で書かれています。 組み立てと調整が少し必要なので初心者よりは中級者向けなのかもしれません。テーブルのレベル調整の方法は説明書に詳しく書かれています。上部で平らな台の上で作業すると組み立て精度が出しやすいです。ベースのフレームはモータドライバとテーブルのスライドが組み立てられた状態で梱包されていますが、足部分の部品をいったん緩めて平らな台の上で締めなおすと良いです。結束バンドが同梱されていますが、ケーブル類のどの部分をどうやって固定するかは書かれていないですが工夫して固定しました。 スライスソフト（日本語対応）の設定項目はとても細かく、上級者でも様々な材料のための条件出しの研究が十分できます。印刷時の騒音はとても小さいです。自分で調整した設定はすべて名前を付けて登録できるのでとても便利です。スライスソフトからはgcodeが出力されます。設定でフレーバが選べるので他のプリンタ用にも使えると思います。Ender3はMarlinフレーバのようです。ソフトからはプリンタを選択するだけで必要な情報（機械の寸法情報、gcodeヘッダフッタなど）がすべて自動で入力されます。完全にカスタム値を入力することもできるのでプリンタを改造したり自作したものにも対応できそうです。私はマイクロＳＤカードにgcodeを保存してプリンタ正面のmicroSDスロットに挿入して、カードから印刷しています。 ステッピングモータの動作も滑らかで速いです。標準設定でＡＢＳ，ＰＬＡが問題なく印刷できました。ＴＰＵは少し調整が必要でしたが押し出し量１２０％に修正したら層間剥離なく密着されて良好な印刷ができました。印刷中にパネルでベッド・ホットエンド温度を変更できるのが便利です。

A máquina é incrível, tem uma boa qualidade de impressão e super silenciosa.

製品自体は一ヶ月ぐらい使ってますが特に問題ないです。 写真のように配線がカバーに挟まって無理矢理組み付けられていました。 良い製品なのだから、こういうので故障しても勿体無いので気をつけて欲しいです。