Zooz 700 Series Z-Wave Plus Mesh Network Scene Controller ZEN32, White | Z-Wave Hub Required

PROS:-- Internal relay can be disabled to work better with smart bulbs.-- Each button LED can be configured to be white, blue, green or red, with low, medium or full brightness. They can also each be always on, always off, or toggled each time the button is pressed.-- Each button sends a separate value for a single, double, triple, quadruple and quintuple press, as well as press-and-hold and release actions, making for a great controller for complex automations.-- Compatible with 3-way circuits, using either a standard 3-way switch or a momentary push switch.-- Sleek, modern appearance.CONS:-- Face color is slightly darker than standard white faceplates and other switches (in North America anyway). See photo.This scene controller is a great value with lots of features for anyone wanting to set up their own automations. This switch seems designed specifically for the home automation DIYer. Construction seems solid. I'm not sure I agree with some other comments related to button softness, but that's somewhat subjective. To me, the buttons seem fine and provide plenty of physical feedback. I wouldn't want the buttons to be much harder to press as that would make multi-press actions difficult.The one gripe I have is that the color doesn't quite match all the white face plates and other switches in the house. The face color is slightly darker. If Zooz were reading this, I'd also recommend more button LED color and brightness options instead of just 4 colors and 3 brightness levels. Each button has RGB LEDs, might as well let us use more then just red, green, blue and white.

This is a Very good switch for smart homes. i found all of the Controls i needed, i have this switch in my room and it is really nice to be able to control the led lights so that the room can stay dark at night. i have found the speed pretty quick. im am useing home assistantI will probably buy a couple more.

I'm using homeseer and getting this to work *for my application* required some scripting. Basically when the button is pushed, it's status has to be cleared otherwise it remembers that is was pushed. I wanted it to act like a momentary switch, just like the buttons for the garage doors...I mean lets keep life simple for the users.The lights are controlled completely independently of the switch state in my setup. There is a switch on the garage door itself that lets homeseer know the state of the garage door. So when that switch is open the light turns red indicating the garage door is open, when the switch is closed, the light turns green.This little setup has worked out PERFECTLY. It is easy to see the door status without having to poke my head in the garage. It gives a very convenient place *inside* the house to control both doors. ( It is also setup to announce the opening and closing of those doors with a spoken sentence.)The switch itself turns some deck lights on and off (non-dimmable led's so it worked out nicely). And I have two buttons left ... need to figure some other equally useful task for them!Getting the entire works set up was a major PITA, there are 2 garage door openers, two switches telling the status of the doors, two controllers that actually control the doors, the homeseer logic (a story in and of itself), and this switch. So this type of thing isn't for the faint of heart, but it also is a really nice setup and an instant hit around the house. The total price tag for all those bits and pieces was about half that of a fancy integrated door controller that doesn't have the same level of integration as this.Setting up the switch was pretty straight forward, I REALLY like the signal strength testing. It included very quickly and easily. ( If you have problems with inclusion, do a factory reset, then include it again) Setting the light colors was down a secret zwave settings path in homeseer but once I found it that was easy to setup. The relay switch works brainlessly with the lights. It is the newer zwave protocol so it announces when someone pushes the button back to homeseer quickly and I have rules setup for that as well. ( It turns on/off other lights on the deck area. ...to bad there isn't a homeseer mosquito laser I would get that in a second!)

I have installed a lot of different zwave switches. GE, Leviton, etc. I have approx. 40 zwave devices on my smartthings hub. Zooz are by far the best pairing, best features, easiest to wire and best looking. The size is smaller than most smart switches which helps when you are replacing standard switches and the switch box is smaller and packed with wire.

I've had this switch in my 'front room' for several months now and it works great. I have it connected directly to home assistant, and have the buttons as triggers for different things,, including the smart bulbs in the front porch light and a couple of wall sconce lights in said room, controls for the blackout shades on the front window, and even a "panic" button if you will that activates all of the floodlights built into the reolink cameras around the house. The family doesn't think twice about how it works but it seems natural for them and I get to dork out adding different scenes like the party mode which triggers multi colors from the bulbs, and of course "rig for red" as I call it for when I'm gaming at night.. I bought a second one for the kitchen to control a smart fan and some other window shades but I haven't installed it yet..All in all it's a great controller that teams up well with home assistant, and has held a constant signal with my server.