Ringke Onyx [Compatible with MagSafe] Designed for Google Pixel 9 Pro Case, Anti-Fingerprint Technology Prevents Oily Smudges Non-Slip Enhanced Grip Precise Cutouts for Camera - Magnetic Dark Green

I ordered a case from Spigen, JETech, SpiderCase, Torras, and Ringke for my new Google Pixel 10 Pro... all of the cases seemed relatively high quality and fit the phone fine. However, the Ringke feels the best in your hand and has the most detailed design. I really like the raised lip around the top and bottom of the screen to enhance drop protection while leaving the sides more flush with the screen so that the case doesn't interfere with your finger movement during phone use. It was also the only case that had perfect alignment on all of the cutouts for speakers and plugs. The Rinke case has a great quality feel and provides great grip. It also feels very minimal (in a good way) and isn't bulky.

I spent a lot of time researching cases for my new Pixel 10 Pro, and my biggest hang-up on most was the poor lens bar fit. Almost all other cases have a slight gap around the lens bar which will allow dirt, dust, grime to build up around the lens bar and inside the case. This case, with how it overlaps the lens bar, not only ensures a gapless fit, it provides even better lens protection as well. On top of that, this case has the most premium, high quality feel of any case I have ever used before. I have used Spigen, Torras, kwmobile, and 1 or 2 others, but this case with its dotted side grips, bezeled edges, stone-like textured back, and tough yet lightweight TPU material feels incredible. The raised lip around the screen at the top and bottom of the phone are great for screen protection, while the recessed lips along the sides allow for easier side swiping which I use as "back" navigation feature on the Pixel. I do not have any issue with swiping up from the bottom either to unlock the phone or access all the apps due to the raised lip either. I put a ohSnap magnetic finger holder on and its right about the same thickness of the lens bar so there is still no wobbling when laid on its back, and it stay attached without issue, even when pulling it off a strong magnetic car mount. I expect to have this case all 3-years I will use this phone and unless it fails me sometime in these 3 years, I expect I'll get this same brand for my next phone too if its similar quality!

I own both the regular case and the magsafe. I also owned and discovered this case for the Google pixel 8 pro. I previously had an Athlex, which is also a fantastic grippy case. What I liked about this one is that it has the same type of grippy nature but even more sleek, Slim and perfectly fit to the Google pixel 8 pro and the Google pixel 9 pro and XL model. The case is thin enough to be comfortable yet thick enough to provide adequate protection. It does a slightly better job than the other case I mentioned with regard to screen protectors, all of which I've been able to apply perfectly without them peeling up due to the case. The molding around the camera bar is the best I have seen and I can't understand why other manufacturers don't do the same. Perhaps they're worried that the cutouts won't match properly, but mine have in every single case I have purchased from Ringke. The onyx has become the standard case for my family and everyone loves it. For the reasons I mentioned. There is grippy texture on the side that makes a tremendous difference from the Torras cases and Spigen, that makes the whole difference. It's designed that way so it's not smooth. However, it's only slightly recessed so there's plenty of comfortable grip that it provides over just plain rubber. There's more camera protection here than any other phone I've seen, with. Perhaps an extra millimeter around the camera in the back. On the front, the top and bottom are slightly higher than the middle of the phone. Magsafe works perfectly. I didn't like using it before but now with this case, being sleek as it is, I sometimes use it for car mounts and stands, being able to stick it on the back whenever I want. It is definitely strong enough to hold the phone and has never been an issue.

THE GOOD: The case itself is decent. The fit is snug not too hard to take off but it won't slip out the case on a drop. The texture on the back and sides feel nice on the hand, which makes the grip feel more secure. Side buttons make a nice clicky sound which may annoy some, but if your a pen pusher like me then the ASMR is nice. It doesn't add a lot of bulk to the phone either and the bezels are just slim enough to make sure the back and front glass screen don't hit the bare floor. THE BAD: The magnet could be stronger, but it's usable enough to be on my cars magnetic phone holder. Also, I'm pretty sure they gave me a used case. The outside plastic was ripped open but on the sealed side, not the bottom that had the glue strip either. Also there was a couple white marks on the back and sides as well. I would like to think it was a manufacturing/packaging problem. 1 star lost for presentation, but other than that this case will do just fine.

Very nice functional.case for the price. Nice look, snug fit with good protection for phone and camera and love the grip

The Ringke Onyx Case for Google Pixel 9a features a slim yet durable build with a premium-textured finish that feels secure and high-quality in hand. With precise fitment and certified protection, it stands as a dependable daily case suitable for both professional and casual use. Pros • Military-grade drop protection. • Durable, high-quality textured finish with excellent grip. • Fingerprint-resistant matte surface. • Precision cutouts; seamless fit with the Pixel 9a Ideal for those who prioritize protection, grip, and a professional appearance without unnecessary bulk.

This case fits perfectly and it's extremely thin while still seeming to have decent protection. The material has sufficient grip and and seems durable. I got the green color and it's a pleasant and calming forest green. The buttons and cut outs are all clean and in the correct position. Something I didn't even notice but I like that there's are two volume buttons on the case despite the single button on the phone which makes it easier to hit up/down. Three magnetic feature seems to work great with all the stands/chargers that I have. Overall I'm very happy with this case. Part of me wishes it had just a bit more character but if you prefer your phone to not stand out, this is a great case.

I was definitely excited for this to come in, as I really can't use my phone comfortably without my MagSafe grip, and the Pixel, being without any MagSafe, requires a case for my use. I love the look and feel of the case, it's a good middle ground between elegant and functional. Overall I'm most happy with it, and I'm surprised I like the textured back so much. Now the biggest issue, the magnet/MagSafe/MagRing. Out of every case I have ever used among multiple Apple devices, numerous Android-based devices, and a multitude of case manufacturers, this case has the weakest magnet I've ever used. My ohsnap! grip constantly gets detached from the case when taking the phone off of any MagSafe mount, such as my bedside charger and my car mount. No other case has had weak enough magnets inside of it to let that happen. Just be warned if you use something similar, these magnets aren't the best, and you get what you pay for.