pitaka for iPhone 16 Pro Case 6.3", Caseless Feeling, Aramid, Black/Grey

I’ve owned iPhones since the 3G and have upgraded nearly every year. Always been a fan of minimalist cases because I don’t like the additional bulk, and I’m typically pretty careful with not scratching or dropping my phones. I just want a case that’s ultra slim, has added grip since the iPhones are really slippery, and doesn’t have any protruding edges to get in the way when swiping towards the edges of the display. I’ve tried many cases throughout the years, and they all have their pros/cons. The couple of ultra slim cases on top of my list are the Peel/Torras and Spigen Thin Fit cases. While the Peel/Torras cases are probably the thinnest I’ve owned, they offer zero protection other than to prevent scratching, but the biggest issue I have with them is how slippery the cases are. In fact, I found them to be even more slippery than the phone itself. Then came the Spigen Thin Fit, which was actually my go-to for a couple iPhone upgrades. It was thin and offered a soft-touch type of grip which I really liked. Over time, however, the thin portions of the edges such as around the volume buttons would crack, and the corners would start wearing out. These were more cosmetic issues, but the case overall served me well, and I appreciated the stealth black aesthetics. The all-black Spigen case was starting to look a little bland after a few years, and then I came across Pitaka. I’ve always loved the carbon fiber look, and so their cases instantly caught my eye. The price was tough to swallow compared to the other cases I mentioned above, but not too much more compared to the bulkier cases from other name brand case manufacturers. Seeing I’m paying for it only once every time I got a new phone, I decided to try it out, and I’m super glad I did. I’ve been a Pitaka fan since I got their first case for my iPhone 8, and I’ve exclusively bought their cases ever since all the way up to the current iPhone 16 Pro. Their minimalist cases have all been a perfect fit, with enough grip, minimal edges to not get in the way of swiping around the display edges, outstanding aesthetics, and long term durability. I’ve especially always loved how the bottom of the case has zero edges because I swipe up so often from the bottom, but others have disliked the lack of protection. This year, they took it one step further and added coverage on the bottom, but they didn’t make the bottom edge sit as high up as the other sides so you’d continue not to feel the case when swiping up. I love their attention to detail such as this. Another thing they did was embed magnets to this thin case so that your magsafe accessories attach sturdily. In prior years, they had two case models: an ultra thin air case without magnets, and a magsafe case that has magnets but is a little thicker and heavier. This year, they were able to have an ultra thin case with embedded magnets, doing away with needing another thicker, heavier model if you wanted magnets. I’ve had numerous products from Pitaka over the years - from each of their iPhone case iterations, to their car mount chargers and their Apple charging station, and none have disappointed. They’re all carefully thought through to be practical, functional, durable, and to look good. Their customer support is also always super responsive if you have questions or need help. Pitaka will be my go-to for all Apple accessories for years to come.

I've been a loyal Pitaka case user for several years now, having owned them for multiple phones, including my latest iPhone 17 Pro Max. Let me start by saying that if you're looking for one of the absolute best thin and strong cases on the market, with fantastic aesthetics and designs, Pitaka is a top contender. What I Love (The Pros): Unbeatable Thinness & Lightweight Design: This is the primary reason I keep coming back. For me, a lightweight case is paramount, and Pitaka delivers. It adds minimal bulk to your phone, making it feel almost naked, but with a layer of protection. Sleek Looks & Quality Feel: The designs are consistently striking. While the black case is my current favorite look, I must note a difference in texture. My previous Moonrise (blue) and Sunset (orange) cases had a more tactile, grippy texture that felt superb in hand. The black version is smoother and a tad more slippery, which is something to be aware of. Good Basic Protection: For my specific use case, where I rarely drop my phone and don't need rugged protection, this case is perfect. It offers excellent defense against everyday scuffs, minor bumps, and scratches. Important Considerations (The Trade-Offs): Protection Level is Specific: While the case is strong and made with aramid fiber (often referred to as carbon fiber in general terms), it's crucial to understand its limits. This case is designed for everyday dent and bump protection, not for major drops onto hard surfaces. If you're prone to frequent or significant drops, this might not be the case for you. Texture & Grip (Color Dependent): As mentioned, the black case, while beautiful, is smoother and slightly less grippy than the Moonrise or Sunset versions I've owned. If maximum grip is a priority, consider the textured options. Overall Verdict: For me, the trade-offs are well worth it. I prioritize extreme thinness, minimal weight, and sleek design over heavy-duty drop protection, and Pitaka delivers exactly that. If your use case aligns with mine – needing protection against daily wear and tear, minor bumps, and appreciating a premium, lightweight feel – then this is an outstanding case that I highly recommend. Just be mindful of your own drop frequency and protection needs!

I rarely if ever write product reviews but this case deserves some attention. If the iPhone Air appeals to you then you’ll understand the desire to keep it out of a case to feel it in your hands. There are times when you do want a case however. When I do use one I want it to be as minimal & unobtrusive as possible. That’s this case from Pitaka! It’s incredibly slim form factor adds an almost imperceptible bit of extra thickness to the phone. The buttons & camera control on the sides are left open to the touch which I like. The feel of the “aramid fiber” material is soft & somewhat grippy. And it stops just shy of the screen on the sides to give the full tactile feel of the touchscreen itself. If you want to add a screen protector I’d get the type that curves over the edge of the screen & I think it would give the phone a seamless feel to the touchscreen itself with this case on. There is some added bulk to this case which cannot be ignored. The plateau on the back & the camera lens itself have a soft metal shielding around it that sits just above it. This tiny shelf provides some lay flat stability to the phone with the case on but even with this there’s no perceptible weight added to the phone. You’ll have to decide if this trade off is acceptable to you. I can live with it myself. The coloring is as shown in the stock photos you see. The case does pick up skin oils from your fingers but unless you turn it in the light you can’t see them. I don’t usually care for branding all over accessories I put on my phone but there is a small Pitaka logo on the upper right sleeve. I don’t mind it at all as it blends in nicely with the color way of the case itself. Overall I give this case a solid five stars. It’s high quality & checks all the boxes for a near weightless & thin experience which is crucial to the iPhone Air. It’s the entire reason for this phone to exist so why would you want to compromise that? I’ve already ordered some more matching items from Pitaka to complete the look. Highly recommend you buy this to encourage continued support for companies that are supporting the iPhone Air. If you want to keep the iPhone Air as near stock as possible this is the way to go.

In the interest of disclosure: I have been using Pitaka cases for almost 8 years now. Starting with the Galaxy S8, then the iPhone 11, the iPhone 13 Pro, and now the iPhone 16 Pro. The good: If you want a good Aramid fiber case, this is a good place to start looking. There are competitors en masse now but in my experience, few are doing it like Pitaka. The bad: Pitaka is making their branding bigger on their cases which reduces the special feeling their case used to have. Now it's just another case with marketing on it. To compensate, the prices have come down. I would pay more for an unbranded case of comparable quality if one existed. The bottom line: There are other makers of aramid cases now. Pitaka is not the only name in the game. But when it comes to cutouts, weight, and finished product, they are the ones I feel most confident in. In past reviews, I have praised Pitakas unwavering commitment to function and design. I have, since using these cases for so long, come to believe the easier it is to hold your phone, the less protective a case can be. While it may not be a perfect case, I gladly take the tradeoff to have a lighter, easier to access phone from my pocket. The case when new is slippery but as its surface becomes "seasoned" it becomes a lot more grippy. The cutouts give my fingers a large index to know where they are with respect to the buttons. Something most cases do a poor job of. This case is a bit of a departure from older stylings that favored angled cutouts in favor of straight cutouts. This has the benefit of reducing exposure as there is more coverage and allows the case to be more tight. The downside is that theres less of a finger ramp to let yourself know where your fingers are with respect to the buttons. We all want our phones to have protection and this case offers some protection. A new experience for me is the metal ring around the camera bump. A nice touch but I have already nicked the sharp edge in a drop and do not expect this to remain looking perfect. If you do happen to drop your phone, as long as it's not from excessive heights, the case will do a fine job in combination with a glass screen protector. Replace it as is necessary. Similar to a screen protector (and any case for that matter), this is a sacrificial layer. If you are prone to dropping your phone this is not the case for you. I miss the original bare styling of Pitaka. I wish they could go back but understand why they may not be able to. And I cannot in good conscience remove a star for a product that is otherwise excellent.

An almost gold standard for aramid/carbon fiber cases, the Pitaka case lives up to its expectation with its build quality, attention to detail, and fit. In particular, I love the fact that the case wraps around the phone just enough but leaves enough of the aluminum underneath to be exposed so that you can see the color of the phone itself (see photos). It allows you to enjoy the beauty of the color you have specifically picked out for that thousand dollar phone of yours. With the slightly more rounded edge of the 17, the new phone inside the Pitaka case feels more comfortable and assuring to behold in hand. However, despite the typical accolades, this generation of cases for iPhone 17 Pro comes up slightly short on edge protection as it has almost no lip on the front edge of the screen. If you look at the attached photos, there is barely any raised edges on the corners of the case such that if you drop the phone on one of the corners or flat on its front facia, the screen is more likely to crack. This case has almost no visible lip that rises above the surace of the front screen--though you can feel the slight raised lip when you rub your finger aginst the edge. I have had at least a dozen aramind/carbon fiber cases for my various phones over the years, this case has the least amount of "lip" compared to them all. [10/6/2025 update] Also, after a few weeks of use, I have noticed the camera action button's cover is too flat and not contoured enough to give you a real sense of where the buttons are, making it somewhat difficult to access while you are on the move and trying to make a quick capture. In that situation, you can't just feel the buttons and snap away. But if you are completely stationary and have no time pressure, then you can find and "feel" the buttons more easily. I am only making this comparison because I have other similar but slightly less covered aramind/carbon fiber cases without any cover over the camera action button. For those, I can pull the phone out of my pocket and without looking at the buttons, "feel" where the action button is and make immediate use of the camera. So, for a semi-pro or someone who frquently need to take quick action shots, this case is not for you. For the purest who want the absolute minimal case, this may be that case, for those who are more practical minded, this case is slightly quesitonable. An additional consideration--the case comes with 3 tiny aramind chips that you can insert into the back of the case to help with fitment for those who may need it. That raises the question of whether there is enough variation in specs in individual cases such that some may require a filler to improve fitment. I am wondering whether I should just order another to see if there is more lip in other cases....

So you get a new phone, open up box and are like WoW. Feels great looks great and the first thoughts in your mind are I need to protect this like a baby. So many cases to pick from that offer minimum protection to maximum protection. Many come with the issue of giving you a poorer quality in hand do to the materials that are used to make the case. You loose that solid premium feel of the side metal and buttons or just rough spots on case. Your phone is protected but you feel like u are holding a candy bar or rough brick. With this design the bulk stays with the cheaper cases and quality thin material of Aramid Fiber (five times lighter than steel and five times stronger) is used here to provide max protection on falls and leaving all the quality that you first felt right where you want it … in your hands and not covered up. The sides of the phone are the least point of impact. When it falls you will hit corners which are all covered, flat back which is covered or face first which I hope you have a screen protector installed. So you are perfectly covered with this case and dont loose any premium feel. There are no rough edges, just smooth comfort in any angle you grab the phone. On top of that, the look is just as attractive as the feel. Thank you for adding the weave collection to add even more flavor to an already attractive case. This case is not just MagSafe compatible but it has built in magnets to add to the MagSafe magnetic pull which is ideal for when you are relying on MagSafe with your car mount. I have no issues at all with this dropping off my car mount when on a bumpy drive. On the inside of the case you see the MagSafe circle and then you don’t see the normal line under it but I was informed that was just a design devision and that strip that I believe works with MagSafe wallets is still built into the case. I have also tried with a MagSafe wallet with no issues. Apple ewallet also works seamlessly with case on with no interruptions of being able to check out with a quick slide on your phone. I have read some reviews about the camera rim which is lifted and protects camera lens when laid on the table. Pitaka made an advancement with it on this variation of cases as instead of plastic they are using metal to offer further protection and avoid any cracking. Some people have mentioned there is a rattle or movement with that metal rim within the case. As you can see with the two cases I have, I was not able to duplicate that issue, with a phone either in or out of case that camera rim is solid in place. I can only assume those were some defective ones during protection and people should reach out to Pitaka for a warranty replacement. Thank You for not only putting all your efforts into your products but also on ways to help protect the environment with your changes to the packaging, made with a 100% biodegradable material. I couldn’t find a better case to compliment my iPhone anymore !! Well done yet once again!! Customer for life !!

I'm super impressed with my new Pitaka case. I have a iPhone 15 Pro Max. I usually buy a Spigen case every time but wanted something prettier and thinner. First things first, the thinness of this case is phenomental. It adds practically no bulk to the phone. The design on the back – it's just fantastic. It has this modern, sophisticated look that really enhances the phone's appearance, making it stand out in the best way possible. (Keep in mind that if you have a light colored phone color, then it will be pretty obvious where the cutouts are. My friend has this case but in a darker phone color and the cutouts are much more subtle.) Moving on to the build quality – it's top-notch. The case feels solid and durable in my hands. Plus, the material they've used is surprisingly grippy. This is a huge plus for me since it reduces the chances of the phone slipping out of my hand. That being said, it's less grippy when set on surfaces— so beware it might slide away on a wet bathroom counter. The primary downside is that this case is almost impossible to take off and put back on. It requires a bit of effort and patience, which can be a bit frustrating, especially if you need to do this frequently. The phone comes with an explainer card on how to remove it which also includes a QR code to a video— so this is definitely a known thing. Honestly, it's a bit of a struggle. It usually takes me a whopping four minutes to get this case off. That's a lot of time spent just trying to remove a phone case... For instance, I used to have this routine where I'd take my phone out of its case as soon as I got home. It was a way to use a "smaller" phone at home when I don't need a protective case. It also gave me a chance to clean both the phone and the case regularly. But with this Pitaka case, that routine has become practically impossible. The effort and time it takes to remove the case mean I've pretty much stopped doing this altogether. Don't get me wrong – once the case is on, it's fantastic in every other aspect. And if you don't need to remove it regularly, it'll be great! Overall, super pleased with the thin size and beautiful design.

The case itself is great, for what it is. It's one of the more attractive, and thin cases on the market which are the two main reasons I bought it for my iPhone Air. I traded my somewhat heavy, and not as well balanced iPhone 16Pro in for the newer, slightly larger Air because after holding it at a local electronics store, I love how much more modern, and in a weird way, premium, and special it felt in my hand than the 16Pro. Perfect thinness while still feeling very high quality, not flimsy. Slightly bigger and brighter screen as well as better feeling weight balance and distribution. The simple one camera design also looks classier and less fussy to me than the three camera set up on the pro phone. So, what does all of that have to do with this Pitaka case? Having this case on the phone takes none of those qualities away from it. It still feels super thin. So much so that you almost can't even tell there's a case on it. It maintains is well balanced and high quality feel in hand, and the case provides slightly better grip surface on the back. It does protect the phone, especially it camera and back glass but it' obviously not the last word in protection which would be expecting too much from a case so thin. I just wish it wasn't so expensive. On that point I have to say, it's not good value for money. The cost of cases, especially nice looking ones like this one are seriously out of control. At the end of the day, it's a super thin piece of plastic and while it looks, and feels great, and fits perfectly on my iPhone Air, it obviously doesn't offer as much protection as a bigger, bulkier, more padded ones for around the same money. Although you'd also be making this beautifully thin slice of technology into a brick which defeats the purpose of buying this particular iPhone. The lack of ultimate protection is also to be expected by any rational, reasonable person considering buying this case by Pitaka. I'm strictly speaking about the value proposition. It's possible to get a much more protective case for the same, or even less money. Sure is pretty, though!

Exactement ce que je cherchais, une coque rigide mais fine qui ne dénature pas le look du téléphone et compatible avec Mag Safe. 2 points négatifs à mon sens : épaisseur très fine à voir en cas de chute et le prix. Sinon tout le reste est excellent . Je recommande

Superb texture and material. Amazing fit. I have always wanted to buy a PITAKA case for my iPhone and when I did it was the best choice I made. It feels as though there is no case at all.

السعر مبالغ فيه جدا هوا كويس بالنسبه لو م عايز تحس انك مركب جراب بس علي سعره قصاد حمايه الموبايل ماانصحكش

Después de una caída de 10cm de altura esto es el resultado, que no se te puede caer nunca si no… bastante decepcionado. Pensaba que no perdería color, que mínimo. Por lo demás la funda está bien, es muy fina, la más fina que he visto nunca.

First and foremost this case offers almost no drop protection and is not designed for that. It’s to protect from scratches when laying your phone down on flat surfaces. It is exceptionally thin and very pretty. The cut outs for the speaker, buttons and charger are deliberately open meaning they work excellently. There is a slight lip above the screen which means you can lay it down face down without too many worries. My phone has a screen protector and the lip sits slightly above that too as per photo. The obnoxious camera bump on the latest iPhones is considered and the protection is not much more that it needs to be to maintain the minimal aesthetic. I’ve owned many Pitaka products over the years and the build quality is always exceptional. I’ve owed previous iterations of this case as well and an older one that didn’t have MagSafe incorporated. Because it was so thin it still worked ok but this latest version has MagSafe built in. This is a valuable addition and now works really well. In summary, if minimum design for scratch protection is what you’re looking for then this is ideal. It isn’t cheap but screams of quality and the new designs are very pretty too.