Hot-Swap Micro Switch PCB Kit for Logitech G Pro Wireless GPW Mice – ENIG Gold Pads, 6-Claw Clamps | Fix Double-Click & Customize Clicks

Happy with the product. I got the G Pro Wireless Superlight Hot Swap PCB (GPX). All the soldered hotswap barrels fit my Huano Brown switches, my TTC White 8mm Encoder, and the provided micro switch for the MMB fine. One thing I did notice is that when everything is re-assembled there is a bit of a side-to-side movement with the middle mouse wheel. I believe this is because the encoder is just floating and is not securely soldered. I may consider soldering the encoder if I like it enough, and then leave the switches alone in case I want to try new ones. Also the nice thing is that you can get this quickly...AliExpress costs the same amount and takes longer.

I was a little worried about the components being loose in the hotswap sockets, but once everything was put together it worked well without any problems. Comes with a Tcc gold dust proof encoder and the kail mouse click button as stated in the description. I recommend using the encoder it feels way nicer than the stock scroll wheel. Pcb works perfectly fine though, highly recommend it.

full hotswap pcb for GPX 2. package contents mostly as pictured in the listing, except mine came with white skates, yellow screwdriver, and pins of the square-switch were not straightened (no problem, I straightened them with tweezers). installed pcb into GPX 2c, it all fits and functions. my own preference, to use kailh red encoder.

This was supposed to be plug and play requiring no soldering. It has too much solder on the hotswap barrels to fit the PCB snuggly within the mouse, resulting in neither front buttons clicking, much less securing the pcb within the mouse without bending it. Would not recommend until they get quality under control.

My Logitech G Pro started having the dreaded double click issue. I did not the soldering equipment (or skill) to replace switches on existing board. This made the swap straight forward and mostly plug and play. Really appreciate the included screwdriver and pads. Means you have pretty much everything you'll need to do this replacement except the switches (does include middle mouse click switch and scroll encoder). Would recommend having something flat/sharp to pry off the pads, and tweezers for disconnecting and reconnecting the two ribbons inside on hand. Opted to go with Kailh GM4.0 (Red) switches.

Excessive soldering paste on hot swap barrels. The PCB does not sit flush against mouse housing as is. Unable to right click without reflowing solder. Can be fixed with a heat gun.

Works well, installation was easy, if you can take apart a mouse and not break any ribbon cables this is a nice little upgrade, does not come with the switches for the left and right clicks but those are fairly easy to source on Amazon. Included scroll wheel encoder was the same as stock. All in all took about 15 minutes to install.

Great hot-swappable pcb. The wheel isn't great, but you can replace it.

Does what it says on the tin!

My son couldn't use it as the item needs to be soldered onto his mouse. How can I return the item? Thank you.