LED 3rd Third Brake Light Replacement for Ford F150 2009 2010 2011 2012 2013 2014 High Mount Stop Lamp Third Cargo Light Rear Tail Center High Brake Light Reverse Lamp Assembly Smoke Lens

Excellent fit, looks great, bright lights

didn't install yet but looks good

The third brake light fit perfect on my 2014 F150 FX4. Also I did purchase the foam gasket and was well worth it. On another note I would recommend when changing out the light to reuse the original screws.

Opened box and was used light. Printed return label but cannot see on my account as retuning anymore. Caution when purchasing.aube jistma one time purchase and was accident

This third brake light for my 2010 F150 Supercrew arrived fast and was packaged well inside a bubble wrap sleeve and a decent cardboard box. I received the smoked third brake light and a package of two washers. There were no instructions to be found however, installation was easy in my opinion. The following is how I installed mine. Removed two Phillips screws with nuts on the backside of the new unit, likely for shipping reasons. These were not reused. Removed two Phillips screws from the old third brake light unit and carefully removed the old unit. I cleaned the mounting surface. I untwisted the three bulb holders from the old unit. The middle holder was for my brake light. The other two were for the cargo lights. I removed the three bulbs from their holders. I connected the new unit - black and white wires to one of the cargo lamp bulb holders and the center red wire to the brake light bulb holder (center holder on the harness with a red wire running to it). Connections are made by pushing the new wire plug assembly into the old bulb holder. One bulb holder will not have a connection. This was for the second bulb for the cargo lamps on the old unit. I then inserted the bulb holders into the new unit and twisted them into place. I installed the rubber-type washers on the original mounting screws with the cup face against the screw head. I installed the screws by hand making sure the unit was snug taking care not to over-tighten and damage the new unit. Performed an operational check. Looking forward to seeing this at night. Hoping for a long, leak-free life from this.