eSUN PLA Filament 1.75mm, PLA Basic Dimensional Accuracy +/- 0.05mm, 1KG Spool (2.2 LBS) Speedy Filament for 3D Printers,Black

When it comes to 3D printing, having a reliable, no-fuss white PLA is essential, and this eSUN PLA Basic filament is exactly that. I've used several eSUN filaments before and this "Basic" line continues to deliver the quality I expect from the brand. The print quality is excellent. The white is a clean, bright, and opaque colour, perfect for all sorts of projects, from prototypes to finished pieces that need a clean look. I've experienced no issues with pigmentation consistency. Performance-wise, it's a dream to print with. It adheres perfectly to the build plate (I use a PEI sheet) and shows great layer adhesion, resulting in strong, clean prints. I've had no clogs, jams, or any extrusion problems. The dimensional accuracy, while listed at +/- 0.05mm, has been perfectly consistent and hasn't caused any issues whatsoever. It just works.I've attached a sample print used with this filament. The winding on the 1KG cardboard spool is neat and tidy, feeding smoothly into my printer without any risk of tangles. For the price, this is an outstanding filament. It's a fantastic, reliable workhorse that I will definitely be ordering again. If you just need a spool of white PLA that you can trust to get the job done without any hassle, this is a perfect choice. Highly recommended.

Prints clean and wound on the spool well. Filament can be quite brittle but not excessively so. It did snap once when feeding into the ams but if you're gentle, it's fine. Looks great especially for this low price. As its a cardboard spool, if you're using an AMS or any multi material system, make sure to print some strips for round the edges before using.

Keep it dry and prints fine and it's much cheaper than the Bambu filament.

Used this to make my daughter a keyring and door sign both printed great and was exactly as described, looks really good and printed great on standard temperature

Terrible winding, filament kept unraveling and tangling constantly. I bought this eSun filament hoping for a smooth printing experience, but it has been nothing but frustration from the moment I loaded it. As you can see in the attached photo, the spool is a complete mess. The filament was poorly wound at the factory, causing it to unravel and tangle almost immediately. I had to stop multiple times to untangle the huge loops and birds nests forming on the spool. Even with a filament guide and careful management, it kept pulling loose strands and creating tangles that cause multiple failed prints and jammed my extruder. If you don't want to babysit your printer I'd suggest picking an alternative product.

I'm pretty pleased with how eSUN PLA performing in my Bambu P1S, on the whole. The first prints looked clean, the layers bonded well and the dimensional accuracy is impressive given the price. I ran a few functional pieces and they came out to spec without any obvious defects, which is always a nice relief. In use I did hit a minor hiccup: the cardboard spool wobbled slightly as it fed through my setup, and that caused a brief feed-issue (it flexed a little under tension). It didn’t stop the print, but it did introduce a tiny skip-line on one item. After reducing tension and securing the spool axis better the problem didn’t recur. So if you’re using it on high-speed or heavy extrusion prints, just check your spool setup. Overall though it’s good value and delivers strong performance out of the box. If you’re looking for a reliable standard filament that doesn’t cost the earth, I’d certainly recommend this one.

This shade of brown is perfect for many projects.

good filament and good print quality

This blue filament has been consistent and easy to print with. It feeds smoothly and has produced reliable results across a range of prints without any issues. The colour comes out clean and even, giving finished pieces a nice, solid look. Print quality has been good with strong layer adhesion and no noticeable defects when using standard settings. Overall, a dependable filament that’s straightforward to use and delivers good results.

Me ha gustado mucho este filamento. El color es muy bonito y las piezas quedan con un acabado bastante limpio. Se imprime fácil, sin atascos ni problemas raros, y se adhiere bien a la cama. Lo he usado para varias piezas y todas han salido bien, con buena calidad y sin complicarme con los ajustes. Para PLA de uso diario me parece una muy buena opción. Le pongo 5 estrellas porque estoy muy contenta con el resultado y lo volvería a comprar.

Fait le job sur bambu lab PS2

Nice filament, I get great quality prints and it's very well priced. Also the white is proper clinical white white (unlike for example the Sunlu PLA + 2.0 white filament which in comparison looks beige). Although one thing I don't understand is why the 1 spool of 1KG and 2 spools of 1KG options turns out cheaper per KG compared to buying 4KG or 10KG. For anyone looking to buy 4KG or more I would advise to closely compare the prices of the various option. Ofcourse there are deals from time to time so your experience may vary but right now 1KG is 11,54 euros and 10KG is 149,99 euros, so buying 10 times 1KG saves you 34,59 euros which is a significant amount of money if you ask me :) Other than the strange pricing my experience with this filament so far is 5/5 stars!

Bambu Lab A1（AMS Lite使用）でプリントするために購入しました。 フィラメントの送りも安定しており、プリント中のトラブルもなくスムーズに使用できています。 実際にNintendo Switchのソフトケースを制作しましたが、細かい部分まできれいに造形できました。 完成したケースにはソフトを8本収納できるので、ゲームの整理にも役立っています。 追記 その後、紫色も購入して使用しました。 色の発色もきれいで、問題なくプリントできています。 色違いでも品質に差は感じず、どちらも安定して使える印象です。 また、小さめのフィギュアもプリントしてみましたが、積層もきれいで発色も良く、小物制作にも使いやすいフィラメントだと感じました。 扱いやすく、日常的なプリントにも安心して使えるPLAフィラメントだと思います。