Acrylic Black Trim Restorer

Highly recommended if you are having a faded car plastic trim(black). You will have to dedicate enough time to apply the coat evenly and allow time for it to dry as well. This is a miracle products which restores the faded part into almost a new one. The coating lasts a long, it’s been 8 months and now the coating is slowly fading. Your hands would get dirty, recommend you to put on the gloves and use a polish sponge for evenly application. Please clean and dust the vehicle dry before applying. Value for money

Pros: after application the product remained on the panel for more than 6months Panel colour after application is like new and doesn't look flashy Cons; application is very tough and needs thorough cleaning of panel before application else the results will not be satisfactory.

Good product for only external plastic parts of car and sccoty such as plastic cladding or plastic parts in scooty because it has black color which I think creates a extremely thin layer after Becoming dry which I noticed on my finger while applying it on my scooty.

Good result

I applied this product on a 2 month old car with factory plastic cladding. I followed the instructions exactly. Initially, it looked slightly better, but that didn’t last. After a single water wash, the polish came off unevenly. Worse than that, it left the trim in a condition where nothing sticks properly anymore, including other trim products I tried afterward. The surface now looks permanently blotchy and stained. At this point, the cladding won’t return to normal, and I’m being told the only real solution is to replace all the exterior cladding, which is ridiculous on a car this new. This is the first Turtle Wax product I’ve ever used that not only didn’t work, but actually made the problem worse. Extremely disappointing and expensive mistake.

Very good product

Its give More Dark shine Black,But it observe the dust easily..

Good

this is really quite impressive stuff! I bought my daughter a 2011 Peugeot 107 as her first car - it was a low mileage example so the paint is in great condition and looked like new after a machine polish - the issue (with all the 107 / C1 / Aygo) cars of this age is badly discoloured plastics. i have a lot of products in the garage but they either didn't seem to make much different or they looked ok until the next rainfall and then ran off and usually made a mess of the surrounding paintwork. I applied this with a little bit of cut-off foam sponge to cleaned plastics - the result was instant - a nice satin black finish - it needs spreading around to ensure coverage and i gave a 2nd coat after a few mins as per the instructions. Hopefully you can see in the picture how radical a different it made - its really restored them to new. after it been on the car for a month in all sorts of rainfall (it lives in the north of England so plenty of rain!) and it still looked great. In that time it had one hand car wash which also didn't affect the look or finish. at the 5 week mark the car was filthy and i gave it a wash with quite strong traffic film remover and a pressure wash - this has made it streak a little, but to be honest it was to be expected - i'l happily re-apply it. in summary - easy to apply - looks like new - lasts well. one note - DO wear gloves when applying - it will NOT come off your hands very easily at all - likewise be careful not to over-apply over paintwork or it can leave a "painty" looking mark too

Je pense qu'il faut masquer toute peinture avant d'appliquer ce produit sur les plastiques car la peinture noire qu'il contient est difficile à enlever. Je ne suis pas satisfait des résultats qui sont inégaux. Certaines zones sont noires mates comme le support d'origine alors que d'autres sont brillantes. L'aspect est mauvais. D'autres produits que j'ai utilisés précédemment ont donné de meilleurs résultats.

I don't have a before and after pic as I just got on with it and at the time didn't think it would be any good anyway. I just took them to say here look, your blxxdy cars cleaned now leave me go gym for a bit. Truth is I love detailing cars and do alot of it. I've my own set up with an absolute ton of products. Picked this gem up for her as she wanted a new car and either one of two things happened and I cleaned off what the dealer put on to hide all the obvious white marks and faded portions of the trim or it was a particular Auto Glym product I used that I just shouldn't have on the black plastic trim but either way it's been horrible for weeks and I just came across this as an option and thought, meh worth a try. I used my polisher, I've always found the cheap drill bit attachments for polishing work just as well. I used the polisher to go over all the trim with a good amount of product, not too much or too thin. By the time that was on all the way around the car it the first bits had sat for 5 minutes as recommended. I chose to go over it twice with two coats. I used a rag to wipe off any that got onto the paint. After that i wiped it down with a foam buffer and that was that. Initially thought this stuff might be good as it ain't coming off my shoe. Obvious tests are rainfall and general weather after a week. It's been three weeks and even after coming back from Tenerife I've walked up to it the same as when I'd finished it. I'll see what happens on my next jet wash but even still, it's amazing. Seen some reviews slating it, not gonna insult anyone's intelligence but I do know people see the word trim and think it's a one size fits all word, it's not. My issue was with the black wheel arches and under side black trim. These are matt finish black plastic, it's the most common trim you'll get. What It didn't work on was the front grill which is a very different feeling plastic that has a glossy texture and finish. This has started to fade from it's initial black to a dark midnight blue. It's not a bother as it actually still looks good, but the product does nothing to this. I've seen some people happy with pictures of black rubber trim and the results they got so clearly works on that. Point is there's a number of different material based trims to cars and this stuff works best on matt finished, plastic quality trims but it won't work on everything.

Au vue des différents avis sur se produit je m'attendais à des résultats au top mais enfin de compte cela ne rénove que partiellement le plastique noir et de plus cela ne dure pas longtemps. D'autres produits font largement mieux.

works well , good shine , would buy again