Thermaltake TT Sync SATA Powered 9 Port Addressable LED Controller TT Premium Edition (Compatible with ASUS Aura Sync, GIGABYTE RGB Fusion and MSI Mystic Light Sync) CL-O015-PL00BL-A,1 Pack

This is a great device. I'm using it on my MSI Prestiege X570 Creation board on a jrainbow port. It works like a charm requiring only the wire that comes with the device to be plugged into the device and the header on the motherboard plus one sata connection for power. It does not require power. The only limitation is that it all is treated as one zone of LED so everything is the same color. If you are using these for fans it also has connections for PWM fan control which is huge. I didn't need this aspect of the device because I'm using it for the RGB in the Thermaltake RGB fittings for water cooling so I cannot comment on how well PWM works but it is there. I wish that this device had a magnetic back instead of requiring velcro. It's minor so I didn't ding a star for the omission but my Corsair Commander Core XT devices in the machine are magnetic and it makes them easier to work with. Hopefully one day a future revision of this will have the feature too.

Swapped the x5 9 pin USB controller for this one to free up a slot for AIO control, and to sync with RGB fusion. I became extremely frustrated during install when nothing could detect this controller. After about 30 minutes of troubleshooting, I learned that I had not plugged in the other end of the DLED cable. Impressive, right? Once that was plugged in, it functions exactly as advertised for a beautiful build. It has a SATA, not a MOLEX, and requires 1 PWM controller for each 3 fans. I have another 6 expansion slots for more fans, and I have a feeling that would work with any other USB style 9 pin fan

Bit of a shame that I have to run so many cables and try to get reasonable look down on cable management, but this big controller makes it kind of hard to do so. Oh well, that is the price of RGB, just unfortunate that it's so massive and hard to put anywhere in the H500M. I will say that I get worried with the smaller cables that plug in to this controller. I can't seem to take them out (not that I'd want to) and if I ever had to replace those, they might rip with my trying to take them out and get stuck inside.

I like the gadget because I can connect many fans of Thermaltake, but it cannot be used with the Thermaltake software, that's a negative point since it does not detect it, it shows the error "Code: H_0x0001". The device works very well with the board's RGB system.

Argb fan controller by thermaltake. Works great and looks great. No noise. Easy to setup.

Product was surprisingly shipped out. I mean that exactly how I typed it. They actually shipped it. Other Thermaltake products took weeks to ship, not this item. To bad it doesn't work as intended. Thermaltake has problems all the way around, from shipping, to returns, to quality control. The fan controller has a bad port. All of my other fans work, except that one on that bad port. I imagine that's not all that's not working, as my Aura Sync can't control the fans, as this product is supposedly for. It does not function in those regards. Not the first product from Thermaltake that had some problems. I'd avoid Thermaltake until they get their act together. They make nice LOOKING products, that function great on paper, but not in real life. I regret going the thermaltake route.

This device works with Thermaltake’s proprietary fans and allows the motherboard’s RGB header to control the lighting. I’m using it with two 200mm Riing Trio fans and haven’t had any issues after several months. It’s unfortunate that the included controllers for these fans are so unreliable, but at least Thermaltake offers a solution that actually works.

Does great to run Thermaltake Riing Plus RGB Fans and AIOs. Every set of 3 'devices' has its own PWM hookup, so you can control the fan speeds using several fan headers on the motherboard. You do lose individual RGB lighting control, as the entire unit hooks into a single digital LED header on the motherboard. However, if you would have all of your RGB lights following the same pattern, or 'synching', this shouldn't be a problem at all. My one complaint is the connector used to connect to the LED header on the motherboard. It does not seat itself securely like other connectors I've used. It just slides onto the pins, and can easily slide back off. Since I was trying to manage my wiring, this did cause some problems with the connector sliding off just because I was moving the cable around. I did try gently spreading the pins, but either it didn't seem to help or I was too scared to really bend the pins. Once everything is set, however, and you don't move things anymore, it works great. I did have a missing cable on arrival. Called Thermaltake USA support, and they sent out the missing cable immediately and without any hassle, so I feel the support response was great.

El controlador funciona bastante bien, lo uso para controlar 4 riing quad con la placa base y va de maravilla. Sólo puedes usar ventiladores de Thermaltake, ya que son envidiosos y utilizan conector propio (usb 2.0 de 9 pines) Este controlador no es posible utilizarlo con el software de Thermaltake. Hay gran cantidad de ventiladores de thermaltake que puedes utilizar con este controlador. 9 riing plus. 5 riing trio, riing quad. 6 swafan. 5 toughfan. Para ser un controlador dependiente de la motherboard es algo caro, pero teniendo en cuenta la complejidad de hacer un adaptador para poder hacer funcionar los ventiladores ( que si se puede) es fácil optar por este. Tambien se puede conectar toda la serie Pacific RGB, que es los accesorios de refrigeración custom Thermaltake.

Ürün kullanılmış ikinci el kutu yırtık açılmış ürün çizik ve kedi tüyü dolu amazona yakışmadı

The problem with this product and all the thermaltake tt rgb plus eco system products is that they are a nightmare to set up and get working. I'm several thousand in and I'm an experienced pc builder but I still can't get them to work properly whether I use Thermaltake's own software or the recommended motherboard rgb software suite. I have stalked relentlessly Thermaltake, Gigabyte and Asus forums and the problems with their stuff are well known, there are a lot of frustrated people out there. Don't go down this rabbit hole, I have lost days of my life trying to make pretty colors on an otherwise very functional rig. Danger turnaround.

Great product to sync up your fan colors with your motherboard and other Addressable RGB components. ONLY WORKS with 5V-Data-Ground headers which are digital and addressable. Gigabyte VDG is also supported. There are 9 ports for thermaltake RGB Riing Plus fans. The product works great. Just confirm your setup is compatible (WS2812B addressable RGB LED strip (5V/Data/GND))

I knew this controller wouldn't allow use of the thermaltake software, relying on your motherboard control, but it does work and fan curves can be set in bios. I just wish my original controller hadn't broken but it does an adequate job and all 4 of my ringtrio fans are now helping cool my power hungry beast!