Ender 3 V3 SE Double Sided PEO PEI Sheet, Smooth PEO and Textured PEI Magnetic Heated Bed 235 * 235mm for Creality K1C/K1/Ender 3 V3/Ender 3 V3 KE/Ender 3/Ender 3 Pro/Ender 3 V2/3 V2 Neo/CR 10 SE

This build plate has been a great upgrade. The textured PEI surface provides excellent adhesion during printing, and parts release easily once the plate cools. I’ve printed several different materials on it and everything sticks consistently without needing glue or additional adhesives. The spring steel plate is sturdy and flexible, which makes removing prints quick and simple. Just a slight bend and the part pops right off. The magnetic base holds the plate securely in place and heats evenly across the surface. Fit and finish are very good, and installation was straightforward. Overall it’s a reliable and well-made plate that makes printing easier and more consistent.

I bought this for my Ender-3 printer and it works great. The description specifically states it is for the V3 model, but it works great for my original model. The main difference between mine and the V3 is that the V3 has two screws at the back of the print bed which help align the print surface. The fit is great for my printer, even though mine lacks the screws. The magnetic print bed is held in place by a sticker that goes onto the heated bed . It was easy to install, and taking the print surface on and off is really easy. Prints stick to the surface very well, and I have not had any prints start to peel off. Getting the print off the surface is really easy, they just pull off, or if it is really large, you can slightly bend the cover and the print comes off, and then it springs back into it's original level shape. I have noticed that my normal settings for the bed and filament temperature work well (I have been using PLA). The best part is that things come off it so well that there isn't anything to clean! Before I would have to scrape and scrape with a putty knife, but those days are gone. This is so easy. Very worth it!

Got it for my Ender-3 V3 KE. Fits perfect, works way better than the original one, and I was not expecting it to come with a magnetic sheet incase your printer doesn't have one.

The PEI Spring Steel Bed is the “mic drop” upgrade my Ender 3 didn’t know it was waiting for. First off, adhesion is flawless. Prints stick like they’ve found their forever home while printing, and then—like magic—pop right off once it cools. No scraping, no swearing, no praying to the 3D print gods. Just clean, reliable results every time. The double-sided texture is awesome: one side leaves a pro-looking textured finish, the other side gives you a smooth base—it’s like having two beds in one. And because it’s magnetic and flexible, I can just lift, flex, and watch my print slide off like butter. 🧈 The spring steel is tough but lightweight, and swapping it on my Ender 3 was as easy as snapping on a magnet (literally). Now my printer feels like it leveled up from “DIY tinkerer” to “pro shop” overnight. In short: sticky when I need it, effortless release after. This PEI bed is the ultimate quality-of-life upgrade for anyone who loves printing but hates prying. If Cinderella was a 3D printer, this would be her glass slipper.

Easy install, just make sure you clean the metal bed with isopropyl alcohol or similar before adhering the magnetic sheet. Prints adhere decently and release easily to PEI sheet. There were a few imperfections on the edges of PEI sheet that I received (see photos), but they are outside of print area so not a huge problem. I just wanted to get printing so I didn't exchange.

Works perfectly on a Creality K1. I use the black pattern side 99.9% of the time. Have to remember to give it a light wash/scrub with a no scratch sponge from time to time. I do not use glue and very rarely have bed adhesion issues. If I do I just give it a wipe down with 99% iso or wash it with dawn soap and it no longer has issues. AMAZING build plate!!!

Wayyyy better than creality’s stock textured PEI plates. PLA & pla+ prints stick well and slide right off once cooled. Trying out a petg print right now.

Install was easy, but I had the hardest time getting my pla to stick. I tried alcohol and hairspray and neither worked. I finally scrubbed it with dish soap and got all kinds of crud off. I would dock stars, but I am not sure if it was user error or if the plate came with a film on it.

Sorprendido con la calidad del producto

Original de buena calidad y funcional

定着悪くなったので交換です。 定着よく剥がれないです。

Very sturdy print bed. It's value for Money/

純正のシートがダメになりこちらを試しに購入。 結果もっと早く買えば良かったと思いました。 定着よし、冷めた後は剥がすのも簡単で買って良かったです。 毎日使用しますが不満ありません。