Fanttik Air Pump Hose Adapter, Extension Hose for Schrader and Presta Valve, 19.96'' Locking Tire Chuck Tube, VG8/8V1 Screw Thread Connection, Tire Inflator Universal, Suit for Car, Motorcycle, Bike

I've tried 2 hand tire pumps for my presta valve bike tires, and both were very finicky to get a good seal. I quickly tired of taking literally 15 minutes just to air up my tires. I love to ride my bike and thought by buying a Milwaukee inflator that my problems would be solved in airing up my tires easily. Well, the adapters from Schrader to the Presta valve was equally frustrating. I kept getting error messages on the Milwaukee inflator and it was taking just as long as the hand pump to finally get the right tire pressure. Then I found this Fanttik Air Pump Hose Adapter. I really didn't have very high hopes that this would work, but am I ever very pleased with this hose adapter!!! It took me a little time to figure out the instructions. At first, I thought I was missing the Presta Valve rubber seal. But after looking at the rubber seal, one side is the Schrader and the other side is for the Presta valve. You just need to turn it around and put it back together. Finally, this is an awesome seal and there is no more messing around with the other finicky adapters. My Milwaukee worked perfectly and aired up my tire to the exact pressure. I actually bought a second Fanttik Air Pump Hose Adapter just to have on hand. Thank you Fanttik, finally a quality seal and ease in pumping up my Presta Valve bike tire..... Just like it should be this easy in the first place!!!

Fast delivery and it works perfect!!! Much better than the screw on one.

Great addition to this air pump it actually makes it easy to put air in your tires and not lose

Better than the hose that came standard with my Fantik X10 APEX, but it's also 5 inches shorter, which makes it inconvenient. I measured the length at 19 inches contrary to the listed measurement of 19.96 inches. The length should be 24 inches at least. Also, the part that attaches to the tire valve also feels a bit gimmicky and doesn't give me confidence. The attachment does not feel secure. It's brand new right now and works, but I am not sure how long it will last.

I bought this after receiving my new Fanttik air pump. I use the pump when touring on my motorcycle and it will eventually save me from a flat one day. The stock Fanttik hose valve connector is a straight in screw type mechanism that is a pain to use on tires mounted on large touring bikes (disk brakes, sprockets, saddlebags, etc). The 90 degree offset of the adaptor attaches easily to my Road King tire valves and connects to the tire valve securely. Although the clamp lever and assembly is made of plastic, I didn't detect any flimsiness while clamping and unclamping the clamp from the valve. The two caveats is that the Pesta valve configuration requires a little disassembly and reassembly of the clamp assembly to get the clamp to fit the smaller valve. One of the parts is a soft rubber sleeve that will bounce and land under something and will be invisible at night. Don't ask me how I know this! Anyhow, I recommend reconfiguring to the Pesta valve size be done in daylight or at least with a flashlight available. The second minor issue is that the clamping mechanism works backwards when attaching/reattaching to the tire valve and takes getting used to. Pros: It doubles the length of the Fanttik compressor hose The clamp seals tightly on the Shrader valve Cons: Configuring the clamp for a Pesta valve requires repositioning of small rubber parts in the clamp The clamping mechanism works backwards from a normal side mount clamp I would definitely recommend this hose adaptor for the Fanttik air pump.

For me this was a must have to make the purchase of the Fanttik X9 Apex Air Compressor easy to use. The compressor came with a straight hose with a screw on fitting. Having the push on 90 degree makes the compressor so much easier/faster to use, and it will get to the rear wheel of my bagger as well. Perhaps it should be standard with the compressor, but it's not. At least it is available.

I bought this to replace the aging standard valve/hose of my Fanttik pump. At first I couldn't get it to work with either valve type. I realized both inner parts of the valve must be flipped for presta. Once flipped around, even my short valves are gripped tightly. I am using the old hose as an extension. Based on the original, I should get several years of usage from this hose. Mine started giving me problems only after letting someone use my pump at a group ride. My images show the assembly order for presta.

Received exactly as described. Product feels well made and durable. It's easier to use than the hose that originally came with my Fanttik pump. Quicker to attach and decouple from tire valve stem.

Producto llego antes de lo estipulado lo que es muy conveniente. Buena calidad y funcionamiento. Es mas practico sin la extension. El cordon original es mu util y eficiente pero es muy corto y es necesario adquirir la extension. El estuche es fuerte y un excelente complemento. 10/10 Recomendado

Adds an extension to the original hose. It connects easily

ottimo sotto tutti i punti di vista, consiglio vivamente

Très bon produit

自動車用に使用。使いやすいです。