2-Pack 1/4 inch TRS Stereo Splitter Y Cable 1 Feet, 6.35mm TRS Stereo Female Plug to Dual 6.35mm Male TS Mono Jack Audio Speaker Adapter，Short 6.35mm Audio Speaker Splitter Connector Converter Cable

This splitter cable works great! I use it for the left and right rear outputs of my 2nd generation focusrite 2i2. If I have two people listening on headphones, I use the splitter cable for the rear and plug another set in the front input of the focusrite in order to have two people monitoring a recording session. The rear is normally used for monitors. Using it this way the person can hear themselves while playing an instrument or singing while at the same time I can hear them through my headphones. Both people using the headphones can adjust their own volumes. The connections when plugged in are very tight and requires some effort to pull apart and push in. You could use a headphone splitter/amplifier which would give you multiple headphone outputs and individual volume controls but this was economincal cost wise. Works great!

Great product, great seller, highly recommend this item.

The overall build qualities is decent. It may not be 24 karat gold to some or any gold but for your value these connectors work awesome, recommended for DYI folks and maybe even some professional just to get by, great value for the money nice connectors built decently.

Good quality, cords should be longer

Son muy eficientes

I’ve bought 2 set of pairs of these with the intention to use them has splitters to connect 2 electronic drum pad in just one input on my edrumin interface. But sadly identically to another person they have loose or badly ground (sleeve) connections in the female connectors. These make open circuits, noise and in my case that the drum pads stop triggering. It’s very frustrating because they seem well made but these female connectors are pretty bad.

This allows me to connect two devices to my karaoke speaker that takes stereo input. No apparent audio/connectivity issues observed so far.

Good quality connectors and beefy cable. Does the job of connecting two balanced 1/4" TRS outputs to one Stereo input in my home studio interface outputs to headphone amp input.

As above not much else to say. I appreciate that it has a high quality feel.

Se ven muy bien en apariencia, pero tienen pesima calidad. Las cubiertas de aluminio se safan con la minima fuerza, y a pesar de que son roscadas, si las tratas de apretar, la rosca se barre con mucha facilidad.

They do work decently. The female end is very tight to the point I was worried braking it while trying to push in the plug for the first time. It got better after. Female and male connector are sealed and can't be repaired it seems. The threads are plastic and don't seem to be reliable. See picture for more info.

Stupidly didn't check them before I needed to use them, and the return window closed 2 days ago!!, I'm peed off and disgusted with more and more products that DO NOT WORK!!, Everything costs 5 times more than it should now, so to have to pay a grossly inflated price for something that doesn't work is infuriating.

Look for something better. Metal sleeves are used, but it's no use. The inside of the connector is extremely poor quality. Additionally, these connectors are not serviceable/repairable. Everything is molded - with a dummy metal outer sleeve. Can't even figure out how to remove the sockets for a look inside....and I'm an electronics pro. The TS sockets do not make proper contact to the tip. Most times it is intermittent with signal loss, and rest of the time the signal is completely lost. Essentially, I'm using it to get the TRS stereo output of my Sonicake Pocketmaster - one mono TS channel going to my guitar Amp, and the other Mono TS channel going to my Headphones (for quiet practice - with the AMP turned off). This product is no good. Waste of money.