TV Backlight 3 Lite with Fish-Eye Correction Function Sync to 55-65 Inch TVs, 3.6m RGBICW Wi-Fi TV LED Backlight with Camera, 4 Colours in 1 Lamp Bead, Voice and APP Control, Adapter

This is an amazing product! I have a lot of govee products in my home as I rate the brand highly so purchased some TV lights and I have to say they take immersion to another level! They pair well with the ceiling light pro in dreamveiw mode and come with a variation of different modes, the app is easy to navigate and the whole set up took less than 20mins. The only thing I will say is when calibrating the camera do it in a well lit room as I found it better than what govee say about doing it in a darkend room. Overall 9/10

I've have a number of other Govee products and had been using the RBIC Light bars behind my 55" Sky Glass TV (Gen2) for a while but saw this on sale and thought it would be a decent upgrade, which it certainly is. I've got "Surround" lighting configured via Dreamview now and although the setup wasn't totally straightforward, as if you own a Sky Glass Gen 2, the camera doesn't sit flush on the TV due to it being thicker than most 'normal' tv's, with the 3M tape and a couple of goes at calibrating it, it's now working like a charm. It is now paired in a Movie Watrching Dreamview with one set of RBIC lights behind and left, another behind and right and a set of "Gaming wall lights' directly behind the sofa. The Dreamview offers an intuitive way to tell the system where each of these lights physically is and pair it to a corresponding number on a 'virtual' room within the Govee App. The whole setup works perfectly, not only for movies but when gaming too. It's superb and very reactive for the cost. I don't see how the far more expensive Pro version could offer more.

Great value and excellent quality. Calibration was a little fiddly, I found the app didn’t 100% track the orange squares placed on the screen for tracking which makes me wonder if my setup is a bit off. Sometimes colours don’t feel 100% accurate but I don’t think you’ll get much better unless you have a far more expensive HDMI setup tbh. When it works though, absolutely incredible. Bright and vibrant colours. The quality of the LED strips themselves are top notch. Looking forward to adding more dreamview lights around the living room to extend the effect.

Adhesive is okay, but could be stronger, lighting quality is perfect and does sync to TV well if set up right. Super easy to control connect perfectly. Easy to use and set up. There is a mild delay in in the colour screen sync but for the price you can’t complain. Compared to ‘Fancy LEDs’ that are like £150, the best you’re gonna get for sure. Worth it.

These lights are great, they work well and the colours are good, quality of lights are also good and they look great in the dark whilst watching a movie or listen to music. cable is a good length and the control works well also, I have purchased other govee products to go with it and they function well together on the app. Try watching the Grinch and the room goes green and the same when watching things like the Smurfs I suppose, it certainly adds to the watching experience of movies and TV (and gaming if that's what your into)

This lighting kit has been a major upgrade for my TV viewing experience and I would highly suggest investing in this as there isn’t anything like it. It’s great this kit works on all tv’s and most sizes and is very easy to install, the adhesive is strong and hasn’t failed yet, while my only complaint falls with the camera adhesive as that can be hard to line up and once you pull it off once it’s ruined so they should include a few replacements. The lighting quality is amazing and it looks sleek with only the camera standing out abit. You are able to control all of it through the app which connect over a 2.4ghz connection to your device and it has all the controls you need as well as in app support if you need any help so it has great connectivity. The colours are vibrant and you are able to tune them to your liking anyways and there isn’t much latency which you can notice so it’s all a pretty smooth viewing experience. It’s better if the background is a solid colour on your wall so that the colours can really bounce, and it should be close to the wall for the best experience.

great product as with all great products everything great with adhesive and light quality with great brightness and finally a great price works well with Alexa

Pretty good - I picked this up at a discounted price, just post-christmas after buying a new TV. I had the T2 version with 2 cameras on my previous TV (which was very good). The T3 lite is good, but not quite as good as the T2 in my view. Where the T2 had 2 cameras as opposed to the 1 fisheye on this one, it also had more LEDs (60 as opposed to 30 on this). As a result, the T2 had longer, nearly continuous LEDs all around the back of the tv with minor gaps between sections, on this, there are distinctive left,top, right bottom strips with larger gaps between them, so, not all of my (65" is lit). Also, the leds appear to be in "blocks" of colour, similar to the rgbic strip, rather than behaving independently as on the T2. I don't believe the fisheye camera is as accurate as the twin cameras on the t2, but it looks a little neater, I suppose I think that the above makes for a less accurate experience than the t2 but it still looks good, especially if you set it up as a hub and sync it with other Govee lights (I have the RGBIC+ strips). Connectivity was quite easy - once set up, the govee app spotted it and I was able to add it- alexa also spotted it, however my old T2 was set up as a hub/gateway in order to control other lights so I had to switch that back on to remove it so that I could set the T3 up to do the same thing. Control/config is done via the all encompassing Govee App and quite easy if you know what you're doing. Once added, you can use your voice assistant, and I believe that this one is also Matter compatible. In terms of physical installation onto the TV, each section is 3M self adhesive and it comes with extra clips to hold the corners in place. Even so, it's still starting to come unstuck on one of the corners, which is a little annoying. I have extra clips from another LED strip. so might employ one of those to see if it holds it. The camera perches/balances on top of the TV with a counterweight at the back (there is a sticky pad included, but didn't seem to want to stick to any part of the camera bracket. A wire from the camera then goes down the back of the TV to the control box (which needs to be powered with the bespoke power adaptor). The control box can also be stuck to the TV but mine just sits on the TV unit as the cable is just long enough. Given the price I paid, I'm happy, but I have learned since that there is a non-lite version of the V3 being released which will be better - and more expensive! I'd