Cooler Master MasterLiquid 120L Core 120mm Close-Loop AIO Liquid Cooler, White LED Pump, Gen S Coldplate Pump, 120mm PWM, CryoFuze 14W/mK, AMD Ryzen AM5/AM4, Intel LGA1700/1200 (MLW-D12M-A17PK-R1)

I bought this after my previous water cooler pump failed. I have an older computer and wasn’t sure if this would work, but it works excellently! The instructions are hard to follow as there are only titles and pictures. Each computer model requires different replacement instructions and techniques. I had to watch a lot of videos to figure out how to get my old one out and put this in. Once I realized that the brackets are for new install only and that all I had to do was put on the thermal paste and put in the proper screw mounts (you just screw them into the slots already there), it was smooth sailing. BE AWARE- if you have installed this with your computer laying on its side, you need to stand it upright after you are done and let it sit for 15-20 minutes so the cooling fluid migrates where it should be.

This is a great unit and all you have to do is carefully read the instructions and you will have a great cooler at a very good price that should last for years. I bought the 120L to replace a 120m. There was nothing wrong with the 120m, but it was installed for 10 years and it is important to keep the CPU cool or it will crash. Cooler Master writes their coolers last up to 8 years, so I was pushing it. I had to remove the 120m to install the 120L, and thought it would be the same, so I did not read the instructions, which was a mistake, as it was not going the way I expected. So, I read the instructions for the 120L, which is only photos, but if you look at the photos it is easy to install. If you ignore the photos, it will not be easy to install.

The instructions seem to mislabel screws G and J. The bags aren't label so you'd guess the image with the bigger looking screws are the bigger screws. This is incorrect, using the bigger screws based on the image will damage the brackets. The images are also not precise, as the shape of the screw head isn't shown properly. This should be corrected, it makes an already awkward mounting process needlessly harder. Works fine other than that, tubes are pretty stiff making it hard to mount in smaller cases but most AIOs are like that.

I am still using the older version of this in another build that is run 24/7 for my security camera's and moderate gamming. It's been 4 years so far since installation and no issues or loss in cooling efficiency. I ran the computer overclocked around 60c-99c for 2 of those years..... Years later this newer model replaced it. Different fan and I'm sure different pump design/motor. The pump face design is practically identical. Installation is a breeze, and it looks like it belongs in my build. This is the BEST budget AIO water cooler. I would not recommend anyone go lower than this brand's quality for aio's because it is a liability. I've herd too many horror stories about cheap aio's leaking, bursting, or random pump fails all within a year. I would be devastated to came back to a wet ruined PC because I cut cheap on my aio. Fan n' heatsink is too loud, and a full-blown water-cooling system is too much maintenance. This device fall's perfectly in-between and the fact the previous version of this model is still running perfect in spite of being run at near max operating temps for extended periods of time and it being well past its life expectancy without warranty voiding maintenance being needed. I always keep power to pump at 50%-65%. Anything higher does not improve cooling and raises operating sound, and if it does cool better, it's by 1 degree.

le cpu ce tien dans les 70 degree... c'est ordinaire en calisse , j ai meme changer lampate thermique en me disant que peut etre c'est cela... dans les meilleur condition c'est cela que j obtiens. J ai 6 ventilateur dans le boitiers... j imagine peut etre dans 9 a 10 vebtilateur ont obtiens peut etre de meilleur reaultat... Mais dans un boitier comme le mien. Je recommande pas du tout ca , j ai facilement 15 degree de plis qu avec mon cpu ventilé a l ancienne. Ah oui pis la pompe a seulement 3 broche et non 4 donc.. ca aussi c deconsertant... Vraimwnt decevant comme produit