Iwillink Blank 12-Port Keystone Patch Panel with 89D Wall Mount Bracket, Versatile Vertical/Horizontal Installation, Includes 6 Blank Keystone Inserts for Custom Configurations

I didn't know this existed, there were others that were more expensive but this one worked great for my needs. Required a screwdriver to get the extra port closers in there, but otherwise a perfect install.

good quality, no issues, fit right in.

I bought two of these for my network closet redesign. I installed Rapink and True Cable keystones and they insert (and remove) just fine. The panels themselves feel pretty solid and I like the cable bar to help provide strain relief for the cables. These are a good economical choice and I wouldn't hesitate recommending them to others.

It turned out to be exactly right for my enclosure, although my implementation has the numbers upside-down. Nice and solid. It was a bit difficult to mount in the enclosure, but that was more the enclosure’s fault. My one gripe is that the keystone connectors are too tight, due to the wires extending on the side of the connectors. Maybe you’re supposed to trim the wires shorter so that they aren’t visible on the sides, but if there are even small protruding stubs (which is how I trimmed them), there isn’t space in the enclosure for all 12. The mounts start to lean, and I had to use a blank between every 3 or 4 keystones to create tolerance (which was OK for me, since I only had 9 cables to attach). I’m not sure if the fault is the mount’s or my trimming of the wires, but there really isn’t any spare room between mounts.

Great for rack setup with keystone jacks. If you have a rack with a variety of different types of wires this makes it easy to setup in a single 1U space. Also much easier for maintenance in the future where you can pull out a blank and add a wire. There is a metal rail for the back to tie your wires onto. It doesn't fit perfectly and can bend a bit, but is easy to bend back into position.

It serves its purpose well. The keystone jacks I bought snap right into place and it looks good.

I'm very pleased with this product. It helped me clean up my home telecom closet. Beside the rack, it comes with 12 blank port covers. I bought this product alone with a set of 25 Iwillink keystones. The keystones fit perfectly. I had some Leviton keystones and tried to see if they would fit, and the answer is no!!! For me, this was not an issue since I was planning on using the Iwillink keystones. Leviton keystones are 16.9 mm high. I couldn't find an official standard on the dimensions of the keystone face, but a Wiki article says the keystone should measure 14.5mm X 16mm. There seems to be slight variations of the dimensions of the keystone face by different manufacturers, so my suggestion is to use the same vendor for the rack and keystones if you want to be guaranteed not to have sizing issues. The Iwillink keystones does fit in Leviton plate covers but not quite as tight of a fit, but it's certainly acceptable. My guess is that you could make Leviton keystones fit, but you would have to file the height down just a tiny bit.

Sturdy, as good as the higher priced alternatives. Probably the best value for keystone patch panel on Amazon. I do a bit of networking/cabling for work and I would consider using this professionally. The included keystone blanks are good quality and really tip the value scale, amazing deal.

The best ever batch panel I purchased all the time. It is easy to punch first the Ethernet Cat6 drops to the Kingstone RJ45 then install them one by one after knowing their numbers. This is much better than punching the cables directly to the other models of patch panels. I like very much the cable organizer which comes with it

Well packaged, arrived in perfect condition. Nicely finished product. Came with black keystone blanks, screws and clips to fasten to rails. Also supplied with small cable ties for cable management if using the removable back plate. Back plate has port numbers which is useful. Haven't installed it yet, but if works as intended will recommend to friends.

Really nice little patch panel, sturdy, does a great job of keeping my communications box much more organized. As others have mentioned, depending on the keystones you're installing, it is a bit on the tight side, but this was not a major issue for me and I was able to get the keystones back out again without damaging the unit.

Well built and easy to use and I like the 10” body as it makes it much easier to fit in media cabinets.

Excellent! Puts the competition to shame! Construction is sheet metal, with plastic inserts for keystones. The numbers are printed. The other one in the picture is from a competitor at the same price range, which is entirely plastic, and keystones do not fit side by side due to design flaw (notice the spacing between the openings, and the blank space at the end). Additionally this came with 12 blanks, 4 rack nuts and screws, and zip-ties. This one is the one to get!