GAMDIAS ATX Mid Tower Gaming Computer PC Case with Side Tempered Glass, 4X 120mm ARGB Case Fans and Sync with 5V RGB Motherboard and Excellent Airflow

Is this a top of the line case? No. It is however, a great value and does exactly what I need from a PC case. Everything I ordered to build my PC fit perfectly, but you may want to check the dimensions of any large GPU or coolers you plan to order. My RX 6650 XT fit snugly, and a there may have been issues if I had ordered a larger GPU. The fans are quieter than I expected and the RGB is simple. I had no issues. However I should warn you, the three intake fans on the front of the case DO NOT have a filter. I should have checked this before buying, but I have 2 dogs and my PC is in a basement that generates a lot of dust. I ordered some cheap screen off of Amazon that came with thin sticky magnets and I made a quick and simple filter to cover the grill of the case. It took me about 20 minutes to cut and fit the screen to the case. All in all I was satisfied with the value I paid for and I feel the case looks neat, simple, and efficient.

This case is really well built, has a nice space for wires to be routed behind the motherboard, just by taking off the other side panel, so makes for a clean install. The included LED controller is nice, and the push button on top of the case to change the pattern works very well. However, I didn't buy a CPU LED that could connect to it to match the patterns (my bad!!). I like how sturdy and well done the case is with a low budget. Best case I have ever purchased.

This case is cheap, but the features and quality seem like something that you would find in a case costing twice as much. There is ample space for radiators up to 360mm and that is either top or front mounted. Also good airflow due to the mesh material at the front of the case. Overall this is the best bang for the buck case i have found in quite some time and i have been building computers for the better part of 15 years on the side. HIGHLY RECOMMENDED!

I like the case and think it's a decent value at the price including the fans. However, know that these cheap cases need some gentle assembly methods or you'll be stripping things straightaway. Everyone should use the trick of turning screws backwards to feel the threads click to try and minimize the chances of cross threading them. Don't use a power screwdriver but rather turn by hand and just gently snug things and you should be fine as anything more and you'll be stripping threads. For things like the bolts to hold the glass side panel, which may be removed lots, I barely snug them by hand to maximize the life.

I absolutely adore this tower and the fact you can change the LED color by the push of a button. It's amazingly compact and fits perfectly underneath my desk. Sure, putting it together sucks, but overall it's worth it! 10/10 I recommend this budget friendly PC shell!

First, the pros: Decent airflow, included RGB fans are fairly quiet, nice smoked glass side panel The cons: 1... Supposed to accept a 240 mm class AIO cooler in either top or front locations, but the USB/audio header block at the front of the case prevents top mounting AIO's of this size in the top position. Not a deal breaker, but I prefer top mounting over front mounting. 2... No instructions or paperwork of any kind included with my unit. Not a big deal as I have assembled hundreds of PC's over the years, but for someone new or not as familiar with the various connectors, it could be an issue. 3... Less cable management room behind the back panel, and no rubber grommets in the pass-through holes, making cable management a bit more difficult. All in all its fairly decent for a budget case, but there are numerous similarly priced cases available with more features and without the cons mentioned above.

We finished building this P C after receiving this Gamdias Aura GC2 case. All is working as it should and I would recommend it to anyone building a computer for any use. I built a gaming computer that will also be used for other things around the house. It looks great with the 4 fan lights that can be seen all around as it flashes different colors.

Good air flow, I was able to build a PC for my cousin and all the parts fit. It's more tall than long, fyi. Shows off the Rgb fans really well

Watercolling qui ne passe pas alors que c'est censé être une tour moyenne !! Donc le watercolling et censé passé !!!

When i ordered it unfortunately it came defected, however their customer service was absolutely amazing, they heard my issue and solved it right away and was shipped to me right away within a day. The second one came in and it worked great. Love the led lights that come with it and their is ample space for all items to go in.

Great item as described excellent price fast shipping

So I bought this case for a MSI B550M pro VDH WiFi motherboard, alongside a 5600 CPU and a thermalright frost tower 120 CPU cooler, and a 5700xt. Everything fits-just. Make sure to check the dimensions, my GPU length was 155mm, the max for this case is 160mm, and the CPU cooler fits with about 5mm between the cooler and tempered glass. The 4 included fans attached to my JRainbow on the motherboard, it included a aRGB splitter, so the one I bought in preparation was not required. The led button on the top of case cycles through about 15 different profiles, such as solid colours, slow changing and also breathing effects. Will check if MSI support changing of colour within software when I've installed a OS. The back of the case has an okay amount of cable management space, with tie in points for cable ties (included with this case) and twisty ties, though the back case does bulge outwards a tiny bit due to my cables. There's also 1 slot for a SSD to be attached to at the back. The HDD bay next to where the PSU would be had to be unscrewed and removed as I put in a ATX PSU from a previous build, I believe a SFX PSU should fit with the HDD bay. Nice mesh filters top and bottom of the case, and the front has great airflow for cooling, a slit on the left and right, and mesh design too. Overall this case is great value for the price, having the 4 aRGB case fans included was always a nice bonus, I preferred the square design on the front, as opposed to be GC1 (which is more rounded). The front of the GC3 looks similar to the beQuiet 500dx but only had 1 fan included, so this design was for me. Fast delivery, bought for £45 early Jan 24.

Tutto bene ok grazie