- Paint Audio MIDI Captain Foot Controller Multi-Effects Keyboards Synthesizer USB-MIDI musical software Bias with Time Engine Function Support all PC/CC/Note commander 10 Foot Switches (Gold)

The MIDI Captain is well-made, powerful, versatile, provides great value, and has massive potential to evolve. I'm really rooting for this company to do well with this product. The MIDI Captain can work on a very basic level, allowing you to to control effects, sequencers, and other MIDI gear. It has different modes that will suit different types of users and workflows. The device is also capable of deep, expert-level configuration to do more complex tasks, including sending QWERTY keystrokes, mouse-clicks, and playing back timed sequences of actions. Unfortuately, the documentation is disorganized and not clearly written. For example, the instructions for installing the firmware say "Turn computer off" but it really means turn the MIDI Captain off. There's no way a noob could possibly know that. I think a new user might have trouble sorting through the different downloads and options that are on the website. I'm pretty experienced and it was kind of confusing to me. Be aware that managing data when it is in USB setup mode, all file processes are VERY slow. All the firmware installation tasks, deleting files, copying, emptying trash, ejecting, all take a LONG time-- way longer than you think should be necessary. Be patient. Just wait until it's done. It all works fine, though. And the docs do give accurate warnings about that. The expression pedals inputs are expecting a TRS connector, with the wiper of the potentiometer connected to the RING of the TRS plug (not the tip). If the pedal is wired/connected this way, it works perfectly. If your pedal doesn't work right, you might want to try adapting the cable so that the tip & ring are reversed. The manual makes no mention of this, but it is mentioned in one video. I've seen reviewers complain about the unit, when they've just got the wrong kind of pedal/wiring. I wish Paint Audio would add a proper MIDI NOTE OFF command (as opposed to using NOTE ON, VELOCITY 0). This way you can enter release velocities-- which is good both for synths that support it, but also can be used in other ways. I also wish that each and every command/message could be sent to any combination of MIDI, USB, and MIDI MATE-- even all three. That is how the Ampero Control works, and it's clever. It might make sense for there to be a user forum, but I could see why that's a can of worms. At the moment, it feels a bit like doing a research project to put the whole picture together. OK, after sharing some of the frustrations, I still think this is a fantastic product, and I'm hopeful that it will get more updates and improvements.

I have been using midi interfaces for guitar rigs for years. They are often complex, massive, and limited in functionality. For example the FBV only lets you change led colors when used with factory devices but the user can’t decide color. My previous Meloaudio Midi device could only send cc#69 with a value of 0-3 after a complex firmware upgrade leaving 4-7 orphaned on my device with no option to deep dive program to fix. It was semi-flexible. Others have no usb or midi din5 connection or won’t power with pedalboard standard 9volt input or even battery. This device with latest 3.0 Geek mode allows any cc with any value on button press and depress independently. It will even allow a chain of 6 commands to each press/depress if you like for more complex activity! This device can act as a 16x8 x12 command sending any combination of continuous control, program change, and or midi notes!!!! It literally replaces my big guitar midi pedal, page turner pedal, midi foot note keyboard, and control pad for SampleTank at the simultaneously in a footprint less than 1/2 of my previous guitar foot pedals. Pictures are custom colors (beyond basic rgb as you can see) on this device programmed by me with the great new onscreen interface. Getting the new firmware on the device was as easy as using a usb flash drive!!! Quality is superb all around. Only complaint is the spring on the battery compartment makes it a little awkward when removing/installing batteries but certainly not a deal breaker! I’m definitely going to upgrade to wireless module for 40$ asap!

First the positives. The super mode is great in concept and price point is good. The build quality is great and also the lighted switches are highly customizable. The programming aspect via super mode is very customizable and you can program for single press, or cyclical press on press or release etc. However a few things make it difficult to use or cumbersome to use or even unusable/reliable 1. Power issue: my unit suffers from intermittent power loss. My guess is the 9V power jack is not connected properly. when I press on the foot switches sometimes it causes the unit to loose power. I have to wiggle the power cable at the jack to restart it. This makes it very unusable or unreliable for live use. I have reached out to support twice with zero response. 2. the programming for super mode while highly customizable -has to be done tethered to the PC. This is quite cumbersome if you are trying to program on the fly. A way to program it remotely via a phone app or via bluetooth would have been convenient For these issues I am giving it a 1 star rating. There is definitely scope for more improvement. I could have lived with the programming aspect - but the power issue just makes it too unreliable. maybe i received a bad unit.

Es una fantástica pedalera midi, fácil de configurar. Finalmente la devolví, ya que este modelo no tenía la opción de wireless (adquirí el dispositivo midi necesario para usar el midi wireless en Amazon Alemania) por eso realicé la devolución y pillé el que si lo tiene...que son unos euros más caro

Midi problem solver. Rugged build and versatile. I wanted to let the company know I thought it was great so I sent them an email which I never do. Also, with a suggestion for a future firmware modification. Wilson, the face of the company responded within 20 minutes to thank me and let me know my rather obvious suggestion was already going to be included in the next firmware update. Impressive to say the least. Buy this thing if you need a powerful, inexpensive midi switcher! Don't let the inexpensive part make you think it's not powerful. One thing I needed to do was have the ability through midi to turn on a return in my preamp. This allows a synth sound from my Ipad, triggered by a Fishman Triple play to be routed to the output of the preamp. My combination of gear made a loud pop sound out of the box when I switched in the return if notes were being played. Not very professional. The Midi Captain allowed me to send All notes off to the synth as well as a patch change on switch down, followed by 'return on', then volume change on the return to match the patch volume to the preamp patch, and all notes back on, on the synth on switch up. Kind of convoluted, but no more pop. I've still got several commands left on that switch to dim the lights, trigger pyrotechnics, or make me a drink... no, it won't actually do that last thing. Buy it, it's good!

Deciding to buy this was difficult. People either rave about it or talk about horrendous experiences. I have an expanded pedal board based on a Boss ES8 and Morningstar ML5 for 5 extra loops. The ES8 doesn’t quite give me enough footswitches and I’m limited on space. The Morningstar MC6 Pro has fewer switches, is bulkier and costs nearly 3 times the price so I got my Captain delivered yesterday. I am very happy with it. I have 2 banks set up mainly addressing the ML5 and easy access of Source Audio EQ2 presets. I have read no manual but I watched the firmware update video and got all the other information from Scott Uhl’s 22 minute video. Firmware update hit a glitch on my Mac. I got an error transferring the entire update so I did it a folder at a time. Turns out a couple of language files, which I don’t need, were the issue so I left them off. Other issue I encountered, which I also experienced with the ML5 (but fixed by getting a MIDI hub), is that with the ES8 MIDI going through the Captain - ES8 commands weren’t getting to my other devices. This was fixed by putting the Captain MIDI before the ES8. As the Captain is another controller on the board I couldn’t put it through the MIDI hub. Complaints? Well I can’t bring myself to pay £40 for the wireless dongle. Around £25 would be more sensible. Also note - and I realised this after I ordered the STD version so I had to cancel and reorder - the STD version does not have WiFi! For the extra £10 it’s worth having it even if you don’t need it now.

Tiene varios modos, yo uso geek mode, ya que se me hace muy facil editar los comandos desde la rueda y boton que vienen alado de la pantalla. Se siente de buena calidad y funciono rapidisimo, lo unico malo es el tiempo para actualizarlo, tiene una memoria muy lenta pero fuera de eso solo lo tienes que hacer una vez si quieres agregarle los nuevos modos

Ottimo controller midi, con possibilità di personalizzare e "programmare" ogni singolo pulsante assegnando comandi diversi per tocco singolo, tocco doppio, lungo etc. Si possono anche personalizzare i colori dei led, e altro ancora. Un avvertimento: si tratta di un prodotto per esperti. La configurazione e il setup richiedono molto impegno, e il manuale non aiuta molto. Sono riuscito a farla funzionare dopo diverse ore, ma una volta che si capisce il funzionamento è perfetta. Personalmente la uso per controllare applicazioni DAW. Unico piccolo difetto, i pulsanti sono un po' rumorosi, aspetto da tenere in considerazione se si vuole usare la pedaliera durante le registrazioni.