Kinstecks 4PCS Motorcycle Indicators - Flowing Turn Signal Lights, Daytime Running and Brake Lights - 12V LED Amber White Red for Motorbike

I bought these to replace the OEM halogen turn signals on my 2008 Honda XR650L and am 100% satisfied with my purchase. This motorcycle is my daily driver which I use to commute to work 100mi round-trip 5 days a week and while Im working this bike spends those days parked in a parking lot, exposed to sun, rain, wind, etc. Since installing these turn signals, I have ridden over 65 hours and 3,000mi and I have not had a single problem. They mounted right up to the mounts for the original turn signals. The most challenging part of the installation for an average person is likely to be connecting the wiring if your motorcycle does not come equipped with the same plugs that come crimped onto the signals. I didn't use those plugs, instead opting to hardwire my signals in through splicing and soldering. The brightness of these turn signals when activated is absolutely fantastic and I am very impressed with the daytime running light and brake-light features which, in addition to the sequential signal pattern, have made a world of a difference in increasing my visibily to other drivers both day and night. The front daytime running lights do an awesome fun pattern right when you turn them on which I show in the video I posted. The whirring sound in the video is the fan mounted to the Cyclops LED Rally headlight I have; The turn signals themselves are silent, high quality, and well worth every penny

Received the product promptly and installed it the same day. Installation was easy enough. Very bright and love the looks of it in the bike. However, three days after installation, as I was swinging the leg over the bike, I hit the left rear signal light and it broke off. Pictures as attached. I was expecting it to have some give. No such thing. Update: As you can see, they immediately contacted me and made steps to address my initial review and sent me a new set for use. Five stars for their outstanding customer support. As for the signal lights themselves, my friends are thoroughly impressed with them, both for their brightness, form and function and was easily worth five stars. Was asked about the signal lights a few times I was out and about. Again, thanks for the great customer support, a company that backs their product.

These are much better than I expected ITO quality and function. I would not hesitate to use them to upgrade factory signals on many motorcycles. Here are some specifications that ought to be included in the product info; nearly all increase the product's value and usefulness: -- logic of lights adheres to legal requirements in ECU and NA markets re logic and frequency of flashing; however not stamped/tested as approved for either. This means that the running lights are extinguished when the signals flash, and proper colors, sufficient brightness (if not slight excess), etc. -- the fastener bolts are m10 type, not m8 as is most common -- the current draw when the running lights are on (at 12.5v) are between 50-80 mA and this depends on the sample and color (red vs white). Corollary: to decrease brightness of running light you may use a mid valued resistor (1-20k) whose value depends on how dim you'd like vs full ON. You could also connect brake directly and running via said resistor for trivial brake helper lights on these, & similarly re high/low variation for running white for front indicators -- the signal lights draw about 20mA when on during their duty cycles. All my samples had good exterior finish and flexible boot that would be effective to prevent or delay cracking upon impacts. Bullet electrical connections can be used or snipped off per application.

Awesome product and great customer service as well..!! I informed them about issue before writing this review... I had an issue with my brake light side when I added the safety strobe module, I tried another brand and still the dam out come. Keep in mind, it worked till one side stop engaging the 4 quick flash; applying the brakes- 4 fast flash, 4 slower flash, then solid brake light. With led’s they draw less power! So would need bigger wattage, resister, and or led relay based on your bike application. Over all the product works and gives the my bike a newer module look to it. Hopefully they would gain more recognition and apply it to there engineering and testing side for there product. This company took care of me and sent another set. I tested the set of turn signal integrated brake light and same ordeal! No 4 fast flash, but engaged the 4 slower flash, solid brake light. I’ll try there brand kinstecks safety strobe module and will post update on that mod.

I've had these lights on my daily commuter for the last 16 months. They look great! They are low profile, really bright, great lighting functionality and seemed to be perfect for my motorcycle! They don't however seem to last very long. The threaded metal insert seems to be the downfall. It too easily pulls loose from the (flexible) rubber of the body of the light. That can easily happen if you tighten it down too tight. Even if you don't it seems after time it just comes loose. Once this happens it can no longer be tightened enough or the light starts to swivel. This has happened to 3 of my lights. One I superglued and that worked for a couple months, then didn't. The other I have to gently tighten as much as it'll take every week. I really like the lights, and if I can't find a better replacement, I will just wire them in a way that allows for a very quick replacement, because the are a great value and worth the money to replace every year. Its just the hassle of doing it that annoys me.

Seller was quick and great. Have ordered these again as a backup in the future if needed. These are next level LEDs and circuitry. They cut through the wind well and at good speed 65 they hold their place like a rock. They are also Extremely bright.. They are very noticeable as they stand out from the normal. They flex a bit if they need to, but they will jump the internal threads of forced too much. This is a simple fix of threading them back on, or even adding some glue before doing so. Whatever your preference on strength. I love them, and the circuitry of patterns and timing. A great solid set.. If you drive in the rain a lot.. do yourself a favor and cap off the wireside of the mounting post with silicone before installing. That way their protected best.

Not Very confident in the Seller...Bought these, Installed on my Bike (Running 12 Volts) - Everything was Actually Great for a month. Then out of nowhere, The Front Right DRL Started cycling, Like it is supposed to when 1st turned on, But was doing this Non-Stop, All The Time. Cycled On/Off Disconnect, Re-Connect - Same Result.. Then a Day later the same Blinker, When using the Blinker as a DRL - 90% of the LED's JUST STOPPED WORKING...... Im Flabbergasted and like WTF.... Check on my warranty Time Frame - And my 30 Days was up because my bike wasn't quite ready yet for the lights and I waited like a month to actually install... It Just Honestly "Sucks".... I Actually Really liked these. Bright as Hell, Sharp Looking, Good Build Quality.. Just Flaked Out and Took a Shiete on Me.....I'll go 2 Star - Vs. a 1 Star - Only because Out of all the different Blinkers I've Tested & Reviewed - I Really did like these lights....... Like I mentioned Above -- It Just Sucks they Shiete the bed so Flipping Early in the Game on Me... BeWare...

Kinstecks - 4 12V directional lights for motorcycles, ATVs and four wheelers is a set of directional lights that offer great visibility for drivers on the road. Some of its features include: 1 Easy installation: Kinstecks turn signals are easy to install and require no special tools. Durability: They are made of high quality materials and have a rugged construction to withstand daily use. 2 Improved visibility: With their four-light design, they offer greater visibility than standard turn signals, increasing safety on the road. 3 Compatibility: They are compatible with a wide variety of motorcycles, ATVs and four-wheelers. Value for money: They offer great value for money, as they include four turn signals at a reasonable price. 4 Overall, Kinstecks turn signals are a good choice for those looking for a high-quality, easy-to-install set of turn signals. They offer increased visibility on the road, which increases driver safety. In addition, they are compatible with a wide variety of vehicles and offer great value for money.

Elime hızlı ulaştı kesinlikle tavsiye ederim

clignotants sympa, installation simple sans besoin de centrale clignotante , elle est integrée à chaque clignotant , il suffit juste de l'alimenter pour que ça clignote en chenillard. effet superbe. les feux diurne avant sont tres lumineux et s'eteingnent dès que la fonction clignotant est activée . pareil pour les feux stop arriere ils s'eteignent dès que le clignitant est actif. installation faite sur un quad sans probleme. Petite modification a faire qui a son importance, c'est l'étanchéité. Car ils ne sont absolument pas étanches. un peu de silicone et le tour est joué.

Amazing customer service and support, Pros: •running lights (white) are really bright, break light (red) are also really bright. •when they turn on the from lights do a swipe looks amazing. Cons: • slight issue with waterproofing, I rode in heavy rain that caused issues with the led’s, This can be prevented by not riding in rain or putting some electrical tape over the exposed holes Overall good product, worth to buy.

Après installation juste des clignoteurs avant trois Leeds ne fonctionnent pas sur l'un d'eux. Je n'ai pas encore installé les arrières car j'attends un support de plaque. Livrez rapide rien a dire.

Knipperlicht is met een defect geleverd helaas kom je daar pas achter als je hem gemonteerd heb... Knipperlicht hoort het remlicht te overrulen en dat gebeurt maar aan 1 zijde. Bedrading nagelopen op fouten maar dit zit in het knipperlicht!