Whirlpool 22003059 Drain Pump Assembly

did the job

As I find with pretty much everything I buy from Amazon, this item fit perfectly and is working perfectly. At the end of the day, if you have done enough research on you tube and backed that information up with additional confirmation on the parts distributor website to make sure you have the right make and model, then you really don't have anything to worry about. this was again, another fairly easy fix for something that would have easily resulted in a repair fill that would have been at least 4 times the price of the part and fixxing myself.........

Not an OEM part, but looks/feels high quality (in fact, better molding of the casing than the OEM part). Don't know if my PN 22003059 is different from everybody else's, but mine has an additional bracket molded into the case, and that bracket is used to hold another component that's attached to another port on the impeller body (my OEM pump has three ports, one of which is deadheaded to some device that also has electrical connections; this pump has only two ports). Anyways, to make a long story shorter, I thought I'd just unscrew the pump and impeller from the impeller body/case and put the new one on the old OEM impeller body/case (the one that has three ports and the other component). When I took the old pump/impeller off, guess what fell out? A rusty bit of steel, maybe 1.5" long and .07" wide by .03" thick. Looks like some type of shim stock piece with a slight curve. Maybe it came off of something upstream, who knows? I did read on another site something someone said about a "rusty nail" they found in their impeller space when they opened it up and fixed it themselves. Inspired, I did the same thing: removed the rusty piece of steel, screwed everything back together, and it works just fine now (the original problem was a screeching noise, followed by shutdown and error code nd - "no drain", i.e. the impeller was jammed by the steel piece). So if your symptoms sound like mine, open up the pump and there's a good chance you only have to clean and reassemble to get everything jake again...

Lasted 3 weeks, second one installed. Very possible could be something else going on but definitely not satisfied. Bought a new washer

worked

This pump fit my older Maytag Neptune perfectly. Installation was less than 30 minutes, and involves only removing the back of the washer, then two hose clamps and an electrical plug. The old pump had gotten very noisy and was not always getting all the water out of the washer. The local repair shop quoted me $99 for the part, plus a minimum of $150 for the service call. It was an easy repair and big savings doing it myself!

Perfect fit for old Maytag Neptune Washer MAH3000AWA. Just remember which wire goes where, as the connection points are not split apart like the original one. May want to also purchase a washing machine discharge hose with clamps, as I couldn't remove my old one from the original pump. Works just like the original and a heck of alot less expensive than the $117.00 ones!! I changed it out easily -- am a woman who likes to save $$ and DIY!

This part went out on my washer. We looked around local for the part and only found them for nothing under one hundred dollars. This was way cheaper in price and fixed my washer. Its been a few months now and many many loads later and my washer works great.