PC CASE ATX Gaming PC Cases ，Mid-Tower USB 3.0 with Double Tempered Glass Full View Computer Cases Black (Fans are not Included) (H6)

Great little case to work with, plenty of space. 5v argb fans pre installed. No issues with install of components or fitment. Can’t beat that price either

Metal is a little thin but not in an awful way. Matte finish scuffs easily but paint seems durable. Mine came with broken front glass and amazon got me a replacement case shipped out immediately. I built in the original and swapped out the front glass. The fans are quiet, nice and bright and move decent amount of air but all fans moving air out of the case was a problem. I turned the top fans over to create some type of intake. I did the top fans for aesthetic reasons. To keep the easily seen fan faces showing. Not the best setup for thermals, flipping bottom fans would have been better but would have looked worse. It works well and looks amazing. Gets a lot of attention.

This case is beautiful in the fans work great. It was actually super easy to build in. Most definitely for the price. This is so worth it.

Pros: Looks very nice. Comes with 9 fans. Fits ATX motherboards (barely) Airflow is good (if you switch all fans around) Cons: Cheap RGB fans. Cable management is a nightmare because of the limited space on the second chamber. All fans installed backwards. A bit bigger than the original design brand. Not a big issue but think you will need a bit of extra space on your table. No dust filter on the side (where the fans sit). Glass is a fingerprint magnet. Other thoughts: It is obviously a close design to a more expensive case, but overall, the look is great. The first thing that you will see is that all fans were installed backwards. So, I adjusted that quickly. Then my motherboard does fit, but the connectors at the bottom were very tight. I would recommend that loosen up the fans at the bottom first, then put all connectors, and then remount the fans. Tested IO at the front and it worked well. RGB fans are terrible. The do work, but you can tell that the brightness, led distance and light diffusion are not that good. In my case, my motherboard did not come with the 3-pin connector, so I had to use a controller. My air intakes are at the bottom and the side, and my exhausts are on top and back. Since I am using an AIO with 2 fans, I changed the 2 fans with the top 2 fans and moved the 3rd fan from the top to the back. So, airflow is good on the case. I wish it also had a dust filter on the side. So, overall, it is a nice case. Just be aware that you may have some extra work to address some of the issues. In my case, I was able to get everything working, and for less money than if i would have gotten the known brand case.

excellent Case for air Flow. Totally Worth it and it really Helps Dropping the temperatures. Also Very nice 9 pre installed Fans that Connect to any ARGB Outlet. Currently Running Ryzen 7 5800XT And Geforce 5060

I absolutely do not recommend this case. This is one of the poorest and misleading cases I've ever built in. First off, an ATX board just barely fits in it. I had to take the board out, do all of my cable runs, and then install the board; even then, I had to get creative with some of the cable runs to make them fit. I also had to spend 20 minutes filing down razor-sharp edges and corners after slicing my finger wide open. The case is very flimsy as well. The fans are all set to exhaust, and I'm assuming they did this to make it look like you're getting reverse-blade ARGB fans. So you have to remove them all and reinstall them, but the cables barely fit once they are turned the correct way. Two of the fans had bad lighting, but it wasn't a big deal due to the fact I had to remove the lower fans because any GPU larger than a 3-slot card will lay on the fans. For an extra 10-20 dollars, you can get a much better case that won't twist and bend, cut you, and fit you're motherboard. We were excited to build in this, and that excitement was quickly filled with frustration.

Great quality. Exactly as advertised.

If you’re looking for a review on the white panoramic case(or black) then ignore all other reviews and read mine from an honest and regular builder, bought this case for $86 usd on sale, there is no swinging glass front it’s a pull off glass. The filters are rubber Matt covers not actual filters. The fans are ok. The fitment for a full atx board is not tight I had plenty of room. The cable management in the back is fairly easy to do if you take your time there’s plenty of space. You absolutely need to buy a compact psu. This case is small in the back but will hold a compact psu about 3 inches wide. This case is fairly cheaply made but at the same time, where else are you going to buy a case this big with 9 fans for under 100 bucks. If you don’t want cheap fans then buy a 90 dollar case with no fans. My opinion is I really like this case for the fans and panoramic and I don’t think I could have found a better deal for a case like this WITH 9 fans for under 200 dollars from a name brand company. I went with asiahorse infinity mirror fans and the Asia horse aio cooler. They were about another 100 bucks for all 9 fans and this build looks amazing in all white. At the same time though it’s not a very high quality case as in the material is thin and just screwing things in chipped off the white paint a bit but only noticeable when taking the screws back off and seeing the marks. Other than that you shouldn’t have any problems. I do also suggest maybe buying a 9 fan module adapter to link all fans together and run only 2 cords to your mobo.

Très bon produit,bonne qualité et un espace pour toute config !

Il case Amanson H09 è una scelta fantastica per chi cerca una custodia da gaming che unisca estetica e prestazioni. Con 9 ventole ARGB preinstallate, offre una gestione del flusso d'aria eccellente per mantenere il PC fresco anche durante le sessioni di gioco più intense. Le luci RGB sono facilmente personalizzabili, aggiungendo un tocco spettacolare al tuo setup. La struttura in doppio vetro temperato permette di mostrare l'interno del PC in tutto il suo splendore, dando un aspetto pulito e moderno. La compatibilità ATX Mid Tower è perfetta per l'installazione di componenti ad alte prestazioni, e c'è ampio spazio per GPU, dissipatori e altre periferiche. L'assemblaggio è semplice grazie a una buona disposizione interna e a un cablaggio ben organizzato. Inoltre, il case è ben costruito, robusto e offre un buon accesso per l'installazione e la manutenzione dei componenti. Se stai cercando un case funzionale, ben ventilato e visivamente accattivante, il Amanson H09 è un’ottima scelta!

Je ne comprends pas les note que ce boiter à reçu. Le boîtier est plus que correct pour le prix il a bien 7 ventilateurs qui fonctionne, l'ouverture latérale est très pratique pour le nettoyage il a même un support intégré pour mètre la carte graphique en position verticale. La ventilations est elle aussi très efficace bien qu'un peu bruillante par défaut mais devient très raisonnable une fois réglé très bon rapport qualité prix.

Hola.. Queria mas refrigeracion.. Y espacio.. Y sobre todo me gusta ver todos los componentes.. Y con la Caja ésta lo veo todo... Me gusta bastante más que las cerradas..

Looks fantastic with all the fans going. Tonnes of space for your customer build and not as noisy as you'd expect which is great as its being used for a recording studio. Good value for what you get in the case and cable management can be as tidy or as messy you want. Has some standoffs reinstalled for standard size motherboards with extras provided if you need them and comes with mounting screws for the motherboard. Power button is only two pin so might need to play about a bit with it depending on what motherboard you use. Removed 1 star due to door hinges not being as secure as they should or could be - resulting in the door almost breaking my toe. Overall a good case and get quite a lot for the money.