BOENFU Small Wire Cutter Flush Cutters Wire Snips Flush Cut Nippers Precision Small Side Cutting Pliers for Jewellery, 3D Print, Plastic Models, Electronics, Black, 5 Inches

First off, I am not sure what some people have complained about these snips being poor quality or not strong enough, perhaps they were using them for the wrong application? It is always worth taking some reviews into consideration as to whether they product is being used properly or for the right purpose, you never know what some people try! So I bought these because I needed to snip two legs of a RTC chip. It was too small and delicate to try this any other way or with any other tool so I ordered these snips hoping/expecting them to be perfect for the job. Well it took me about 5 seconds to complete the job and the snips cut the delicate little legs off the chip like they were nothing, so they felt good and sharp and robust enough for this type of job. So I can definitley say these snips are what you want if you need to cut electronic components on pcbs. They were also the perfect size and shape to reach into where I wanted to reach and just gently snip the two legs, one at a time. I also needed to remove the legs so using the snips I was able to pull them out. Honestly it was actually 100 times easier than I was expecting. They were comfortable to use and they have a useful little clip to go over the cutting end for protection and also to keep them good whilst not in use. I also figured these were better value than other ones listed on Amazon simply because you get two! I also have a feeling the same product is listed and sold only with slightly different branding so be wary of this as this listing is definitely the best value as you get two pairs. I can see these being of use to me in the future and lasting quite a long time. The only way I could see them breaking is if I was using them on stuff two strong for them to snip through. I don't think these would snip through anything as tough as a key ring ring or steel loop for example. You might be able to with force but I'd say you'd wreck the snips. These are perfect for small electronics in my opinion and perhaps fine jewellery. Very happy with mine.

Last purchases in 2023 and have used daily since, prefer these to other cutters I have that are expensive top brands. They have lasted as perfect as they say I got them however I recently borrowed them to someone to use on a heavy duty stainless steel job that required larger more suitable cutters instead and they are slightly marred now so I’m buying a new pair or else I wouldn’t have need to! They perfect for jewellery making :)

This was purchase to snip down extra component parts after soldering on a through hole board. When using the snips for that they have been excellent, with their bevelled edge allowing a very close cut, much closer than you could get with normal scissors. The grip is rubberised and the spring closure is gentle with limited back pressure, excellent for small jobs. I did notice that the cutting heads did have some very small chips, but this was most likely caused by too thick components, or one with a stronger metal. The packaging did not list the compatible materials or the max thickness, so I am unable to comment on if they were used out of spec. For the price its hard to argue at the usability of the snips, but be careful to the extent you use them.

WOW for the price these are wondeful!! It feels like a rip off! I bought a massive pack of them and I am still using the first one! Not to mention you have perfect grip on the handles and they are a great size! You can snip anything with them it feels like 🤣. I have already snipped different metals in pieces like steel , aluminium and whatever else i had. They are strong and amazing quality aswell are great if you own a 3D printer for cutting the plastic supports off. I am so so happy!!

Excellent quality and value. I have had several of these micro flush cutters because they are made exceptionally well. With flush cutters you can cut on one side for a flat surface, great for making jump rings, and cutting using the angled side you obviously get an angled cut! Easy to use and comfortable to hold and very sharp. Being micro cutters, they snip right into the smallest areas which is perfect for jewellery making.

Very handy small face cutters that are sharp and do cut extremely close to a flush surface , nice and springy and seem to be made well as feel quite sturdy for their size . They are quite good with the alignment of the cutters if you’re using them for electronics

Excellent, only wish I had bought a pair sooner, I had been using wire cutters and these are so much more precise and have a narrower profile on the tip to get in more easily. Very sharp. The only small niggle I have is the only way to keep these closed is with the little clear rubber sharps cap that comes on the tip. Otherwise they stay open until you manually hold them closed. it's probably not an issue for most people but I can easily see me losing the clear cap , however I could just use a rubber band because they are soo well made they close easily. The action is smooth and requires next to no pressure so good if you have restricted stregth in your fingers. It makes such a clean cut at any angle. I am using it to cut the excess off the bars of safety toy eyes, the bar is solid rigid plastic and these cut through like butter.. Very pleased with these, wish I had known about these and had a pair sooner. The grip has a thick rubberised red coating that is easy to hold. Non slip. My nephew has already threatened to snaffle them for his Warhammer crafting, I can imagine they would be useful in quite a few craft settings, anything small you need cutting, cable ties, those tin soldiers and aircraft building, jewellery making etc etc.

Genuinely terrible. I assemble bat detectors which are all surface-mount, the only thing I need to cut is the leg on a AAA battery holder. These things couldn't cut through it, the metal on the cutting edge just bent and left circular gaps between the cuttign edges. Utter junk.

Bra för små grejer. Hur länge den håller återstår att se.

Ciò che mi serviva per il taglio di fili di resistenza per creazione coil di e-cig. Dotata di punta con taglio facile e preciso.

Pour du bricolage, tailler certaines plantes et composants électroniques. Bonne prise en main avec rappel par ressort.

Für den Preis unschlagbar.

Ich habe die BOENFU Seitenschneider Klein, 2 Stück Elektronik Drahtschneider für meinen 3D-Drucker gekauft und bin absolut begeistert! Diese Seitenschneider sind wirklich erstklassig und erfüllen ihre Aufgabe perfekt. Die Qualität der Werkzeuge ist hervorragend. Sie sind robust und gut verarbeitet, was ein langlebiges und zuverlässiges Produkt verspricht. Die scharfen Schneidkanten ermöglichen präzises und müheloses Schneiden von Drähten, ohne dass diese abrutschen oder sich verformen. Besonders beeindruckt hat mich die Präzision der BOENFU Seitenschneider. Dank ihrer feinen Spitzen kann ich präzise Schnitte durchführen, selbst bei kleinsten Drähten. Das ist gerade beim Entfernen von Stützstrukturen oder beim Schneiden von filigranen Teilen im 3D-Druck von großer Bedeutung. Die ergonomische Griffform liegt angenehm in der Hand und ermöglicht ein ermüdungsfreies Arbeiten auch über längere Zeiträume hinweg. Die handliche Größe der Seitenschneider ist perfekt für den Einsatz im 3D-Druck, da sie in engen Räumen problemlos manövriert werden können. Der Lieferumfang von zwei Seitenschneidern ist äußerst praktisch, da man so immer einen Ersatz zur Hand hat oder auch gemeinsam mit einem Partner arbeiten kann. Das Preis-Leistungs-Verhältnis dieser Werkzeuge ist wirklich unschlagbar. Insgesamt bin ich von den BOENFU Seitenschneidern absolut überzeugt. Sie sind eine großartige Ergänzung für meinen 3D-Drucker und haben meine Erwartungen übertroffen. Ich kann sie jedem 3D-Druck-Enthusiasten oder Bastler wärmstens empfehlen. Wenn Sie nach zuverlässigen und präzisen Seitenschneidern suchen, sind die BOENFU Seitenschneider definitiv die richtige Wahl!