POR 50ML BOX

Yep, it is UHU Por - the genuine article, and I got it at a good price. For some reason, this glue isn't all that easy to find. I've only ever been able to buy it online. This is the best glue for styrofoam aka EPS (Expanded Polystyrene foam) - it won't dissolve it, like some. It's popular for aeromodelling, but it sticks most things to most other things. I've used it with wood. I've even stuck bits of cork and felt to brass and woodwind instruments with it. It can be used as a contact cement - apply to both sides, wait a few mins, then press together - or it can just be used wet, with a bit more setting time. I prefer to do that, because you get time to reposition things. The smell isn't unpleasant, and I think it's reasonably safe for kids to use, if that's an issue. It sets as a clear gum, not hard or brittle. You can generally get things you've glued with it apart again, if you really try.

There seems to be some misunderstanding on quantity - I received two packs of UHU POR, 50ml tube in each pack - amazing value. UHU POR is the must have product for repairing and building expanded foam RC airplanes - it cures fully in about 24 hours - but will make a strong bond when applied to both surfaces and allowed to dry for about 10 minutes before contact. Unlike epoxy or CA this glue retains some flexibility when dry and does not snap or crack when flying your RC plane. I have used it to repair wings and fuselages with no problem. The Sport Cub below was successfully repaired in 10 minutes - but I always wait a day before flying. A great product to get you back in the air safely.

Used it with great success on model aeroplanes during building and repairs! It's great on all the foams I've used it with and does NOT melt foam! Use a small amount on both surfaces; allow 5-10 minutes drying time, then bring together both sides. Light, strong and flexible with no odour! What's not to like?

Arrived faster than expected. Trying to attach sheet rubber to blue polystyrene, it's not perfect - but at least it doesn't melt the polystyrene! The bond between two sheets of polystyrene is superb.

easy to use with great adhesive quality.

Perfect for gluing any foams that are affected by e.g. Cyanoacrylate or other solvent-based glues. When using as contact adhesive, found it best not to leave to dry for too long - i.e. typically around 2-3 minutes, not the 10-20 minutes as suggested in the instructions - but also depends on temperature, humidity, etc. Also works fine in liquid mode - i.e. typically sets OK when parts are left clamped overnight.

Well now, what is there to say about this stuff that hasn't already been said? Not a lot I suspect. suffice to say it does what it does very well, delivery was very quick and for a good price. I'm a happy man, and several friends who have been in need of some sticky stuff have used it with many thanks. Get some - you know it makes sense!

Does exactly what it says , sticks polystyrene very well and dries pretty quickly too. I have used it for making a snow scene for a model village and I am very pleased with the results. Great sellers very responsive and helpful

Facile da usare molto efficace e veloce, non credevo fosse cosi rapida e che la tenuta fosse cosi sicura. Un ottimo prodotto.

Ok, so I've been a fan of Beacon's Foam Tac for a long time. That stuff is pretty good - this stuff is better. In fact, both work well for gluing but I can use half a tube of UHU POR and store it for 6 months and it'll still be good to go when I open it again. The Foam Tac stuff starts to go bad after you open it - so use it all in a single build, or lose it if you store it for a while. This is the better glue just from a storage perspective. As for adhesive properties, honestly, this might be just a TAD bit better than Foam Tac.

Love this glue. It works well for anything that has relatedly smooth surface and where is the area of contact is large enough. Just follow the instructions.

bon produit pour le modelisne

Cette colle ne m'a jamais déçu pour les collages de modélisme (EPP/EPO). Sur des surfaces planes, elle offre un collage digne des bonnes colles néoprène (contact) mais compatible avec le polystyrène (qui n'aime généralement pas les colles néoprène). Sur des petits cordons, elle permet de réaliser des charnières souples entre deux parties. A la fois souple et puissante, c'est l'idéal pour moi.