Spigen EZ Fit Tempered Glass Screen Protector for Apple Watch Ultra 3/2/1 (49mm) - 2 Pack

These are a very good buy if you want to protect the screen of an Apple Watch Ultra without affecting the look or usability too much. The tempered glass feels good quality, fits well, and gives that extra peace of mind against scratches and everyday knocks. Application was straightforward, and once fitted they sit neatly on the screen without being too noticeable. The touch response still feels good, and the display remains clear, which is exactly what you want from a screen protector. Having a 2-pack is also a nice bonus, whether as a spare or in case the first one ever needs replacing. Overall, they feel like a practical accessory that helps protect an expensive device without much compromise.

After searching for a decent screen protector, I decided on this. I’ve never purchased anything from this brand before so I was uncertain of the quality I was going to receive, overall, this seems a really good purchase. It was easy to install. There was an alignment. Try the instructions could’ve been more clearer. However I found more information when I searched YouTube. This is very easy to install had no issues no bubbles no flaws at all. I would definitely recommend this. This is certainly good quality, this is tempered glass. This is just as good as Belkin and various other makes on the market fits perfectly on my ultra 2, Crystal, clear screen, no issue with touch, sensitivity at all would definitely purchase again if needed.

Excellent quality screen protector applies quickly and efficiently with minimal fuss no air bubbles everything you need to apply the protector is provided love that they give you a tool to help with removing it if needed. Got installed on My Apple Watch ultra 3. I don’t get all negative reviews as it went on perfect first time and with the first protector. Don’t just take my word for it you can see from the photos on my review for the results

I’ve bought two packs of these. The fitting guide is good. The screen touch sensitivity is good. I didn’t have any problem with bubbles. The only issue I have is it does seem to be brittle and tends to get a tiny crack starting from one of the edges that slowly spreads crack across the screen. I’ve gone through three of these so far, with one screen lasting six months. That said I’m about to order another pack because I can’t really find an alternative product that doesn’t have durability issues. So in summary a good product, but because the durability is not reliable enough, it’s overpriced

Perfect fit easy to install with simple straight forward instructions and does the job perfectly, would buy again if replacements needed. I have cracked one so far but it was entirely my fault and it saved my watch from damage. Included pick tool made it easier to remove old screen protector too

I use a Spigen case on my 15 Pro and I was expecting equally great things from this screen protector. Unfortunately, for my own experience, it's been a waste of money. The protector itself is easy to install with the installation kit provided. The instructions are straightforward; even if not, there's a handy video demonstration to the left of the main photograph at the top pf the Amazon page. Adhesion of the protector to the watch screen is excellent and the fit is bang on. And there's two screen protectors and installation kits in the box i.e. there's a spare for when the first one is chipped and or cracked (which it will). For me though, the positives stop there. The watch screen loses sensitivity with the protector fitted. This is not a massive deal for me, just a mild annoyance. The protector must be incredibly brittle. I caught it on the edge of a barbell in the gym, a gentle knock, and the protector chipped. Couple of days later, I knocked the screen against on of the machines in the gym and it cracked so badly that I had to remove the protector. Since then, I've knocked my watch in the gym quite a few times and there's not so much as a blemish. I haven't bothered fitting the second protector as the screen of my watch is obviously way tougher. I bought AppleCare with my watch, which covers me for accidental damage, so in the grand scheme of things I don't need a screen protector. I thought I'd get one though, belt and braces, but this particular one is not up to the job. Sorry Spigen, I love your phone cases but this product is a waste of money and I do not recommend it. Buy the AppleCare policy for your watch instead. Ok, it's more money but it's more sensibly spent.

Easy to install, fits perfectly on the Apple Watch Ultra, and the screen remains clear and responsive. Good quality tempered glass.

The screen protector itself is well made and sized. It’s semi-flexible so doesn’t feel like it is made of glass - as another reviewer says, it's probably a plastic. Touch screen responses are affected, but very dependant on how well the screen protector fits and amount of dust underneath. Get it fitted with no dust or fibres underneath and the touch response is 95% as good as without. There is slightly more drag when swiping your finger across the screen, but barely noticeable. There are two protectors in the pack - smart. I stuffed up the first. The second went on perfectly though. Recommended procedure: 1. Have a nice calming camomile tea. Meditate and find your happy place. 2. Put on a head torch so you are working with good light and can spot any dust on the watch before the protector is applied. 3. Unclip the watch strap on one side only so it lays flat but still gives you something to hold the watch down with later. Lay it on the supplied rubber pad. 4. Use the alcohol wipe to thoroughly clean the screen 5. Polish the screen with the supplied cloth - but be careful, this cloth seems fairly poor and can leave fibres and fluff 6. Inspect the screen thoroughly using the head torch. Repeat steps 4 & 5 as needed. 7. Fit the large dust-grabber sticker completely over the watch screen and press out any bubbles. (the small dust-grabber stickers should be binned as their edges leaves a glue residue) Do a dry practice run of the following - then do it for real 8. Hold your breath so you don’t accidentally blow dust or fibres about 9. Peel off the ‘back’ from a screen protector, keeping it the right way up so no dust settles on the underside of the protector 10. Working quickly, remove the large dust grabbing sticker from the watch face, use the still-attached strap and large crown guard to help hold the watch down as you do it 11. Line up the screen protector and press it on to the watch in the centre 12. Breath again 13. Wait 10 seconds for the protector to make connection to the watch 14. Carefully peel the “press here” sticker off the top 15. Remove the plastic surround 16. Use the squeegee to do a first pass getting rid of the bubbles 17. Remove the top film 18. Use the squeegee again to get of any bubbles - you may need to carefully lift a corner or two with a fingernail or the supplied tool to help the bubbles escape. Be careful and patient and don’t bend the screen protector too high or it won’t sit flat again when you release it. 19. If the have an edge that seems like it won’t settle flush, carefully try to rub it and 5mm each side flat. I had a couple of raised edges which settled down with this gentle massage. 20. Admire your accomplishment. Open a beer or wine - you’ve earned it.

Product well received and it works great, easy to install and you almost forget it’s there after installation, that is, until you touch the buttery smooth surface. Sensitivity after installation is also unchanged. 5/5

Apple Watch Ultra2のために購入。 1枚あたり900円以下なので家電量販店で買うよりコスパは良いかも。 貼り付け用のアタッチメントがついてるのでズレることなく貼れるのが選んだ理由です。 上側にほんの少し浮きができてしまってるのが気になるけど問題なく使えてます。 PITAKAのケースとも干渉せず使えてるので星5です。

It actually fits the watch screen. One thing to note is that the whole thing wasn’t fitting on watch and led to a minor dust particle in between glass and screen. I guess you have to remove the straps before applying this. Overall it’s good

Superb. Probably best to do this as soon as you buy the watch but otherwise the box contains 2 screen protectors so if you f the first one up you can go again. However I didn’t so I have a spare. Excellent. Also my spigen case fits around it perfectly. It’s well protected

Excellent screen protector. Installation was extremely easy thanks to the alignment frame — no bubbles, no dust, perfect positioning on the first try. The glass feels smooth, very responsive to touch, and does not affect Face ID or screen clarity at all. Fits perfectly with my case and covers the screen well without lifting at the edges. Great value for the quality. Definitely would buy again.