1/2 inch Standard Clamp, 10 Pack, Pipe Support, PEX, Copper, CPVC, 231Z10

Used to stabilize a drainage pipe and to help hold a spout piece in it. Works perfectly for both purposes. My main concern was the amount of flexibility of the piece. It's flexible enough to spread easily, but tight enough that it clasps the pipe hard enough to avoid even needing to put anything in the screw holes to keep it in place. Perfect for me.

I am running all new water lines in the house using pex. For the 1/2 lines, I wanted solid brackets instead of the simple nail in ones. These are perfect and you can screw down both sides and the ribbed insides grip the water line so it doesn't move. These are great and I am happy with the purchase.

These worked well to lock down the copper pipes I sweated to remodel the kitchen. I imagine they’d do well on PEX as well but I’m a copper guy.

Good quality

Used these to make element holder for a Hex beam. They were attached to each fiberglass spreader and are big enough to easily pass the wire elements through which is great since I use this antenna for several portable antenna setups. Maybe not the intent of this item, but it's a pretty good inexpensive hack.

These clips have much better holding power that the copper straps, easy to use and we'll made. They might not be cost effective for a large project.

Using these to attach 3/4" PEX B to my subfloor and also to wood joists. Easy to install and they hold the pex well.

Works quite well, but I didn't screw the clamps in; instead, I used two inch strips of Scotch "Extreme" Mounting Tape on the clamps, which hold a 1/2" light steel tube curtain rod above a screen door window, rather than tap the aluminum frame for a screw. Too risky to drill. I cleaned the attachment points on the frame with alcohol first. The "ribs" of the clamp are extremely effective for holding the tape. Hint: Avoid touching the tape with your fingers, use tweezers instead. It's sticky stuff! Do a "dry run" and mark the installation points with a sliver of duct or masking tape underneath. Don't eyeball it. Press the taped clamps firmly,

can be used for alot of things

Clips hold water pipes in place and prevent any movement or vibrations. Simple to use, just expand clip and place over pipe and screw or nail clip in place. Would be nice if it came with self tapping screws. Recommend product.

Good

Happy with order

Wow Beau, bon et vraiment pas cher !, Utilisation pour accrocher aux murs, des tuyaux de cuivre 3/4'' :)