Plastic 4.6 inch Sofa Legs, 4 Pack Tapered Sofa/Couch/Chair Legs with M8 Thread Screws, Replacement Furniture Legs

The legs are very solidly made and came for a very good price. It came with the mounting plate and screws, and was packaged well so that the metal pieces did not scratch the plastic feet during shipping, even in an envelope filled with 2 sets. While not an exact color match, the dark finish still works very well with the Ikea Kallax brown-black drawers. The drill bits I used to pilot drill into the Kallax shelf was *3/32" for the wood screws that attach the plate, and 5/16" for the machine screw in the leg that passes up into the shelf. We flipped the shelf over and pushed it into place with no give in the legs. They are firmly planted even in the hollow particle board that makes up the shelf structure. Update 1/5/2020: I bought 4 more sets for 4 additional shelves and they are all the same construction/quality with one minor exception - the screw coming out of the leg can be slightly off center on some legs, which you mainly only notice when you screw it into the mounting plate. It is not far off enough to make a difference on my setup especially since I put the legs inward from the front face by 1", but thought it was worth mentioning in case your setup requires exactness. Again, no other variances in quality from the first two sets I bought and happy the quality is consistent! *Also if you are concerned with the mounting plates' screws sitting firm in cheap particle board furniture, I recommend a 1/16" drill bit for the pilot hole instead of 3/32". I didn't use 1/16" on mine, but I had to be careful to stop my screwdriver when the screw was all the way in because it would continue to spin and strip out the hole if I wasn't cautious. That said, each plate and leg sits firmly in my Ikea particle board shelves.

I know these are not designed for an adjustable, but they do a great job. I have a platform and I wanted to put my adjustable bed on the platform - my bed is not 'platform compatible' I wanted to minimize height and put the shortest legs the bed could have and give the mechanism clearance. These leave about 3/8 " clearance below the mechanism - perfect for my application, and were MUCH cheaper than purpose built Adjustable bed legs (my bed uses 12 legs). These are M8 screws, the same as the Ghostbed Frame.

Wanted to give our daybed a new stylish look and get rid of the rusty metal frame. These legs were easy to install with provided screws and mounting plates to the bottom of the foundation (box spring). The legs screw into the mounting plates and are adjustable so you can easily level your furniture if you have an uneven floor. They are very durable and gave us the updated look we were looking for and the price was a fraction of what a new metal bed frame costs!

I didn't expect much from these legs, and they delivered. I picked up an unwanted small Ikea style desk to use as my son's Zoom school desk -- poor kid was broadcasting from a sewing table for the first couple months! Anyhow, the previous owner saw fit to install four heavy duty castering wheels on the desk, and these just weren't appropriate, especially for a wiggly 9 year-old on a wood floor. I didn't expect much from these legs, but bought them based on the reasonable price vs. spending $10 per leg at a local hardware store. I was a bit surprised that these legs are hollow yet thick plastic. Maybe I anticipated something more solid, but whatever -- they seem up to the task for this use and had everything necessary to install into this cheap press-board desk. The fact that they thread in to their mounting brackets means they allow a degree of leveling should it be necessary.

One of my ikea ecktorp legs snapped during our move, which fully broke off the screw for the leg. This 6” leg is a perfect match for the screw size and height. The width is more narrow than the IKEA leg (pictured), but the couch is slip-covered and goes fully over the legs anyway, so no one will ever notice or see it. Great solution and an easy fix. I saw someone mention the newer model Ektorp leg is taller, so I would just measure if you’re unsure. Ours was manufactured prior to 2020, not sure the exact year since it was 2nd hand.

We needed longer legs for our Ikea Kivik so that it was a more comfortable height and our Rumba could vacuum under it and these did just the trick! Thank goodness they including mounting plates, because all the blogs saying that the Kivik is compatible with M8 threading ended up being wrong!

I always read reviews on items before purchasing and this is my honest review on these sofa legs This is the second set of these we buy for the same sofa, the first set I thought it was that we made some sort of mistake with the installation, we bought a second set and we were extra careful with the installation making sure everything was done properly. This picture is taken 5 minutes after installing them and nobody has even sat on the couch... I am so dissatisfied with what I spent in these 2 sets I would have probably gotten some really good ones. They are probably ok for a small chair but most definitely they are not ok for a 3 seater couch

I think these legs will work out. We put them on 2 couches in our business showroom to replace casters which made the couches unstable. I'll be better able to evaluate after we use the couches now for a few weeks. They appear sturdy, and the hardware is good. I'm only giving 3 stars because one leg broke while being installed. The "fins" holding the bolt broke. So, I ended up buying another set, just to get that one replacement. I hope other legs do not break in the same way during use.

Reposición de una cama

Son de plástico pero soportan bien. Lo único es que se deslizan muy fácil