Stove Gasket Kit

Great kit. Affordable. So far working perfectly. On my old stove. Before, Sometimes smoke would bellow out around the door when lighting the stove or backdrafts. So i installed this kit this morning and let the silicone cure a bit before lighting the stove. The first hour with the door wide open than the remaining cure time with door closed(door may struggle to close at first until a new groove is worn into the gasket) once i lit the stove the gasket made a nice inlay for a good seal. Note i put the cut rope side to the hinges (as thats the most clamping force) and also 45• cut both sides of the rope so it would overlap itself like a scarf joint in trim work. Instead of using that silly tape they supply. (Picture are before new gasket was installed) note the discoloration on the pellet stove door. Thats where heat and smoke was escaping before reseal)

Great kit . The tape helps a lot to keep the ends from fraying. Easy install and no leaks. The glue included was great compared to the liquid cement.

I struggled to find the right size for my woodstove door, but this is exactly what i needed. All parts work well, cement is just right amount, and what can i say, the house hasn't burn down yet! i guess it does a good job!

Dads gasket broke what can I say but excellent gasket and the glue works like it should. Ordered another just to have on hand when ours wears out.

I had enough caulk to do the entire stove but only enough gasket material for one of three doors. Also, the fiberglass tape was difficult to apply. My mistake for not measuring and ordering a longer gasket. I put the gasket in the door groove and cut it to fit, then applied the high temp caulk. It was easy to apply with the cut to fit applicator. I put the gasket in could not close the door. After a few times of pressing the gasket into the groove, stretching it out and cutting the excess off the I got the door to close with a tight fit. I then applied the tape to the cut ends as best I could. Don't put the tape on until you make the adjustments so that the door will close with a tight fit.

Good product. Read from other products online. Made best decision for use of this product. Removed stove door, removed old gasket, used rubbing alcohol to final clean, let dry, layer out new gasket to check size before cut and before glue, made cut about 1/4" longer, used rubber gloves to put on glue inside door, pressed gasket, used supplied tape to wrap ends, placed door on flat surface, gasket facing up, placed few magazines and few books to put pressure on gasket as it dried. Allowed to dry 12-24 hrs in 70-80 degrees room. Used next day, working perfect. Using everyday no issues.

Worked exactly as expected. The role was slightly longer than I needed so I simply trimmed it with scissors with any fraying. The tape provided allow the two ends to come together cleanly, and the cement/glue was easy to apply and container enough to apply liberally. The door seals extremely well now and seems to hold up well to the heat.

Seems to be working fine on my airtight stove. Solidly woven and dense. My application required me to cut it since my stove has two doors and it did not fray all up. There was enough gasket cement to lay down a good bead on both doors.

Bien , rapide et conforme

Très bon produit et tube de colle pouvant faire pas mal de joint supplémentaire

Arrived early. The gasket looked to be of good quality. It was pretty easy to install made a good seal on my pellet stove.

Perfecta para este tipo de estufas,terminación de lana y el producto del pegamento tiene suficiente para su instalación.

Just as advertised and ready to follow instructions. Easy to apply. Well worth it help keep the fireplace maintained. 👍🏼