Spigen Rugged Armor Designed for Pixel 6a Case (2022) - Matte Black

I have purchased Spigen Mobile Phone Cases over the years for different make phones such as One Plus, Motorola and in this case a Pixel 6a. All have been durable with one exception, a clear plastic model which became stretched out over time. Otherwise the all black Spigen cases have been durable, allow a firm gripping surface, and have protected occasionally dropped phones. The phone cases fit all the various models of phone manufacturers with no problem in their various configurations. Black is pretty much my choice. The clear plastic color phone case lasted about a year and a half but became a little loose, perhaps from to much pocketing and unpocketing.

My 7th different model Spigen case (really, I counted), and I wouldn't buy another brand now. At least for how I use my phone, it's pretty much perfect. This one goes on my new Pixel 6a and like all the others is a perfect fit for the specific device. Older versions sometimes took a little use to break-in the TPU in areas that flex (like the cover on the power and volume buttons) but recent versions have been ready to go from first use. No break-in period. What I like in general: * Edge protection with a raised lip so you can safely put the device face down, but without a giant rim to catch crumbs. * Textured enough to not slip, but not so much to get stuck in jeans. * Perfect cut-outs where needed. All of my cables fit the ports properly. * No rough edges or poor finishes, everything looks polished. * Raised lip prevents accidental presses at the edges, but doesn't interfere with any part of the screen. * Anonymity for the device if you're carrying a high-end model somewhere it might be eye-catching. Other thoughts or concerns: * If you have 2 devices, the rubber is higher friction between the two cases if they live in the same pocket or bag (it is meant to not slip, after all). * The black case hides your pretty case color and makes it easier to leave the device behind on a dark surface. * If you're movement or strength impaired, the buttons do take slightly more effort to press through the TPU. You may consider Spigen's other version which leaves the buttons exposed. * The screen is not protected against direct strikes to the middle by something smaller than the width of the case. In my experience that's very rare, but the case will not protect against that if it happens. Overall, like every Spigen Rugged Armor I've used, it's just right for the job. I carry my phones in a lot of random places and it's nice to not have to worry about dropping or bumping them. The Pixel 6a in particular is VERY slippery (it'll slide off even a slightly slanted surface) so highly recommend putting a case on your 6a, especially this one.

Spigen Rugged Armor cases are my go-to for several reasons. They offer a relatively slim encasement, provide moderate protection, and offer a professional appearance. They're also grippy without making them difficult to pocket. My last Rugged Armor case, for the Pixel 3a XL has served me well for over three years. My last attached photo shows the Pixel 6a case (left) and my three-year-old Pixel 3a XL case (right), if you're curious about how they compare in size or how these hold up. This Spigen case is relatively slim, only slightly thicker than the Pixel 3a XL case, but that's because the Pixel 6a is slightly thicker. It'll fit my pocket and my dash mount, no problem. At first I expected it to be super thick to protect the 6a's camera bar. It's not so bad, the back's material is about 2mm thick. Dimensions are shown in the attached photos. The length of the case is just over 6 inches. My calipers tapped out after that. (We'll never know the actual length, I guess.) Width is a hair under 3 inches. The height is as advertised at approx. 0.47 inches. Protection afforded by the Rugged Armor series is moderate. Remember, these cases are not huge rubber bricks like their "marsupial" competitors. That's a main reason for my repeated purchasing. I want something I can slip into my pocket without having to clip onto my belt. (Sorry all you bat-dads out there, I'm hanging on to what little dignity I have left.) The design of this case with respect to cushioning and materials is essentially identical to the one I've used on my Pixel 3a XL for the last three years. I've carried it every single day since then. It's been bumped and dropped too many times to count, but the phone has survived without any cracks, chips, or scratches as a result. Over time dust and grit can work its way between the case and phone causing some surface wear, but that is easily remedied with occasional cleaning. I don't know if the "Air Cushioning" feature is legit or a gimmick, but my phone is still mint after all this time. The styling of this 6a case is reapectable. The faux carbon fiber inlays, top and bottom of the back, are convincing. They reflect light like the real thing, as can be seen in my first photo. They're also inset, so they should be somewhat resistant to cosmetic wear. The finish is matte and grippy, even more so than my last Rugged Armor case. The first photo also does a pretty good job of capturing the texture. Additionally, I really like the scalloped or carved texture on the sides of the phone. That will help me hang on during the extreme sports I don't play. Maybe one day. I was curious to see how this case would protect the camera bar. The stock photos make it look like there could be a raised ring to protect the lens from damage. The top of the bar is raised in relation to the carbon fiber inlays, but is in-plane with the rest of the back. We'll see if the 2mm thick material is enough to keep the lens off of table tops when the phone rests on its back. The lip around the front of the case will keep screen from contacting a flat tabletop if laid face down. Big fan of that feature. Don't expect it to save your screen from a drop on gravel or asphalt, though. That's not something this style of case can mitigate. The cuts for the speaker ports and USB-C charging port seem adequate. I would have liked a slightly larger opening for greater compatibility with the most bulky USB-C accessories, but it is larger than the opening on the 3a XL case. I don't expect any real issues. The buttons are cut through around portions of their peripheries. That makes them easy to press and preserves the tactile function of the phone's buttons beneath. This is also shown in one of the attached photos. Overall, this seems like another quality Spigen Rugged Armor case. I've relied on these models for years, and they've always served me well. I'm pleased with the improved styling and slim profile for the Pixel 6a. The slightly larger USB-C port is also a welcome feature, although it could be a little larger. Comfort and grip are excellent, while still allowing easy pocketing. For now, I'm completely satisfied with this purchase, but I will report back if my assessment changes. Thanks for reading!

I like this case. It looks good. The side texture offers a good and comfortable grip. The smooth back I think will decrease the amount of dust and dirt the case picks up. It fits well in a front pants pocket. This case has cutout (holes) buttons, which exposes the phone's buttons to dust and such. The claim is it helps responsiveness. The Spigen Tough Armor case has solid buttons and I thought they were more responsive than this case. The case recess around the screen and camera is a bit thin, which potentially exposes the phone to more scratches from rough surfaces. But, that's a tradeoff to get a thin case.

This has become my number one case for various phones I've had in the past and present. Latest is for the Pixel 6a. I've tried many other cases on different phones, but this one just hits the sweet spot. What I like most is the diagonal "grip marks" on both sides. So many cases are too slippery - but not this one. When you pick up your phone, you get a solid, sure grip with your fingers. When it's in your hand, same thing. I've drdopped my phones a few times, and none of my phones have ever been damaged while in this case. The buttons always have the right amount of pressure, click, and responsiveness. The small lip around the edges keeps your screen off of the surface when facing down. Excellent design.

The case is a good fit and has a great texture so that you don't feel it will slip out of your hands. It is very thin but despite that feels like it is providing good protection for the phone.

Cover ottima per il mio telefono; è solida senza essere estremamente rigida, la pressione dei tasti volume e power on è molto naturale e precisa. Il bordo leggermente rialzato offre protezione allo schermo e alla fotocamera ma nel complesso l'imgombro della cover non è elevato, considerando che è progettata per fornire una protezione da urti etc. Ultimo ma non meno importante, non ho avuto problemi a mettere una protezione per schermo e fotocamera posteriore.

No se decolora con el tiempo ni se ensucia en exceso

Fijne cover. Houd stevig aan, makkelijk te installeren. Het is kwaliteit en niet een goedkoop stukje rubber of plastic.