Kreg KMA2685 Rip-Cut Circular Saw Guide - Cutting Tool - Guide is Best for Regular (Side-Blade) Circular Saw - Ensure Compatibility Before Use - Woodworking Tools for Home Improvement

EDIT Its update time on this one yall. To start I stand by my enitial review of the product. After a few uses the slideing action did smooth out as I thought it would. As I allso mentioned the plastic felt like it was to brakable. And this latest episode ads credence as to why I feel It should be all mettle. The plastic lock snapped while I was sinching it down after an adjustment. I had not at any point in time gottent ruff with the tool. BUT it was sitting out in the blazeing sun for a good while as I was working out doors and had no real shade. So I do wander if the exces heat on the plastic didnt play a part in it. Iv uploaded picures to show whare the failure occured I'm highly satisfied with this tool. It's a snap to put together its light waight and easy to use. If you can mess up your cuts with this you mayby might want to find something ells to do Now despite my happiness with this product I do have some mild constructive criticism. 1 it would be really nice to get and all mettle version of this tool. I just feel like all the plastic parts can be broken. Even at a cost premium I would pay it 2 the adjustment on this thing is herky jerky rough not at all as smooth as I feel it could and should be it can allso effect fine mesurements. But Mayby this will level out with more use 3 this gose back to the all metle parts thing again. But the plastic clamp that holds the main line in place i wish wer metel as it feels like something that could eventuilly get warn out and iether snap or not make good grip. As well as the saw clamps themselves theyr metle rods anchored to plastic and the way that whole portion of the unit flexes upwhen ypu put tension on the mounting screws. Yea I think you can do somthing about that Now befor anyone starts throwing rotten food at there monitore I'm actuilly not bagging on this product far from it. So far nothing is brocken and everything is holding together. This is so far a good product. These are all just feed back for the company to take into consideration on any future tool updates

This works beter than I expected. Once adjusted the settings are spot on when ripping plywood. Works ell with my Chraftsman battery operated saw. Only issue was when attaching the saw the lever to set the angle is in the way of the adjustment screw, but only had to loosen the lever , tighten the screw and reset the blad to 0°.

I used this Kreg cutting system to break down large plywood sheets while building shelves for my built-in closet, and it definitely helped make the project more manageable. I’ve attached photos showing the plywood I ripped — from oversized sheets to narrow precision cuts. For large boards, this tool is a huge help, and I was even able to make cuts as narrow as 1 inch. However, several issues keep this tool from earning a higher rating. First, the product arrived in basic plastic packaging with no protective covering, and the jigsaw guide piece inside was already bent and scratched before I even started. For a tool meant to support precision work, this was disappointing and cost it a star on its own. Next, the latch mechanism used to set measurements doesn’t always stay locked. Adjusting the ruler takes more effort than it should, and at times I had to hold things manually to keep my measurements steady. The entire system is made of plastic, which raises durability concerns. Even tightening screws by hand caused bending — without using a drill. That doesn’t inspire confidence for long-term, repeated use. Sliding the jigsaw along the guide also takes finesse. The head attachment can shift or loosen during cuts, which slows the process and affects consistency. The instructions were okay, but I strongly recommend watching a video tutorial first. The spacing between the saw head attachment and the actual blade isn’t perfectly accurate, so doing several test cuts is essential before starting real projects. Despite these issues, this system does handle large rip cuts well, and with patience, you can achieve more precise cuts too. Overall, while this tool is very helpful for DIYers, especially for breaking down large panels, the packaging damage, plastic construction, and latch issues prevent it from being a top-tier product. Still, it’s a useful addition to a DIY toolkit — just expect some quirks.

The Kreg KMA2685 Rip-Cut guide is a game-changer for straight, accurate cuts with a side-blade circular saw. Setup is fast and simple, and once clamped, the guide stays rock solid — no wobble or drift. Cuts come out perfectly straight every time, which makes a huge difference on sheet goods or long boards. I’ve used it on plywood, MDF, and solid wood, and it performs flawlessly every time. It’s lightweight, easy to store, and incredibly sturdy. Tip: Double-check your saw’s compatibility before purchasing, but if it fits, this guide will dramatically improve your cutting accuracy and confidence. Highly recommended for DIYers and professionals alike — precision and peace of mind in one simple tool.

Good deal

Was able to use with a battery powered Bosch saw as well as my 40+ year old, metal cased, cored, Craftsman saw. Just about any saw should fit on this system. Saves tons of time with easily repeatable cuts. This is especially handy when making several of the same item. One of the best upgrades for my wood shop I have added in a very long time.

My main complaint was that I received the item in a well-constructed "bubble" pack, intact, but a critical item ("filler strip") was missing making it unusable. I note from other reviews of this and other Kreg products that is not unique problem. And in today's modern error free manufacturing that's a big issue. It would have meant that the weekend project I bought it for would be delayed a week. I called tech support -- they took a voice mail but never said they were closed for the day nor what their hours of operation would be. I got a call back on Monday, far too late. I realized that at the best case it would be two to four days to get the part or replacement product. So I went to Lowe's to buy another one, and returned this to Amazon, not the worst thing in the world but also not the experience I was looking for. Using the tool I agree with the common complaints of many reviewers here and on YouTube: the materials are a little flimsy and not the quality you'd like to see. A better grade of plastic, nylon instead perhaps would make the product feel stronger. I did have a bit of a learning curve with it, but that means one piece of not expensive material had to be scrapped as I got the hang of it. All things considered it works well, though design should allow for easier switching of the operation from left to right handed, which is essentially another materials issue. I don't know that you could switch back and forth frequently without the screws or the plastic part held by them eventually loosening. For some very weird reason I found my blade alignment in the jig somehow became 1/4 inch off; that is, it was aligned correctly then a later cut suddenly was that far off the line...I realigned and can't figure out what wnet wrong, but it hasn't happened again so I chalk it up to some error on my part. I bought it because I have a project that eventually requires two foot rips in 4x8 panels and the hassle and cost of doing this on a table saw (which I don't have) made this an ideal solution. I have not yet gotten to the point where I will do that particular operation but it has worked well in the less difficult cuts I had to make. So all in all, it's worth the shortcomings in terms of utility vs cost.

If you struggle with making straight, accurate cuts with a circular saw, the Kreg KMA2685 Rip-Cut Guide is a must-have tool! Whether you're a DIYer or a professional, this track guide makes ripping plywood, MDF, and other large sheets effortless and precise. Key Features: ✅ Effortless Precision Cuts: Attaches to your circular saw, allowing you to make perfectly straight, repeatable cuts up to 24 inches wide. No need for chalk lines or clamps! ✅ Universal Compatibility: Works with left- and right-blade circular saws, making it incredibly versatile. ✅ Tool-Free Adjustments: The easy-to-use measuring scale ensures quick and accurate setup for fast, repeatable cuts. ✅ Durable Aluminum Guide Rail: Provides a rigid and stable edge to guide your saw smoothly without wobbling. ✅ Ideal for Large Sheet Goods: Helps cut plywood, MDF, and OSB sheets with ease—no need for a table saw! My Experience: Setting up the Kreg Rip-Cut took just minutes, and I was amazed at how much easier it made cutting full sheets of plywood. No more struggling with uneven freehand cuts—every pass was straight, smooth, and precise. The tool-free adjustments and built-in measurement scale made it incredibly user-friendly, even for beginners. It’s also a time-saver—once the guide is set, I can quickly repeat cuts without having to measure and mark each time. I especially love how lightweight it is, making it easy to transport and store. Pros & Cons: ✅ Pros: ✔️ Delivers straight, accurate cuts every time ✔️ Easy to attach and use with most circular saws ✔️ Quick adjustments for repeat cuts ✔️ Lightweight yet durable aluminum construction ✔️ Eliminates the need for a table saw in many projects ❌ Cons: Limited to 24-inch cuts (not ideal for wider rips) Plastic components could be more heavy-duty Final Verdict: The Kreg KMA2685 Rip-Cut Guide is a game-changer for anyone working with sheet goods. If you want faster, straighter, and more repeatable cuts with your circular saw, this is the perfect solution. It’s a must-have for woodworkers, DIYers, and home improvement projects!