Mesh Screen with Magnetic Closure-Keeps Bugs Out Let Breeze in, Heavy Duty - Pet and Kid Friendly, Works with Front, Sliding Doors (38 x 82 Inch)

Here in South Florida, we have hurricane doors which usually do not have screens. This kit works perfectly to add a screen to those doors. Installation was extremely easy with the included self-adhesive velcro strips. I was able to install in 10 minutes The central magnetic closure is very strong and does not separate on its own, yet the dogs and cats easily learned they can go in and out by pushing on it Unfortunately it doesn't look as good as a traditional screen door, but it gets the job done without lookin bad...the convenience of it outweighs the aesthetics Pros: Very well built screen ... been installed for months, and no tears or stretching Very quick to install, especially with the included velcro strips Great for the pets to go in and out without letting in mosquitoes and lizards

This door works awesome! Allows a breeze, keeps out the bugs, and the dogs can come and go when they want. They quickly learned how to open it, and it closes automatically with magnets. It's exactly what we needed.

I tried a magnetic screen before and was not happy, so I was hesitant about the purchase. This screen exceeded expectations. The velcro straps were easy to put on and the screen itself was easy to put up. I measured my door at 35” x 79”, and with a little adjustment, the 38” x 80” size fit really well. It lined up nicely and feels secure. The other brand I used felt flimsy, but this one is much more durable. The mesh is sturdy, and the magnets run cleanly down the center so it “seals” itself shut behind you almost instantly. It’s been especially convenient for everyday use. I can walk in and out while grilling or hanging outside without constantly opening and closing the door. Even better, I don’t have to keep getting up to let the dogs in and out. They were a little unsure of it at first, but with a bit of encouragement, they figured it out quickly and now go through it without hesitation. It fulfills its main purpose—keeping bugs out while still letting fresh air in. Definitely worth every penny.

Overall, great product so far. Super easy to install. A few things I wish I thought about before buying: Magnets get stuck on our metal door so I have to be sure the flaps close all the way when in use. Need it to be slightly longer to cover the gap between net and threshold. I could have ordered a different size but I think it will do the job most of the time. I also wish I got a little wider. To fit the frame, I am at the edge with no wiggle room. This causes the opening to be a pretty tight triangle when passing through. It’s not a huge problem but if we need move things in and out, we would have to undo the Velcro and reattach. More of an inconvenience but again, not a huge problem.

I live in a manufactured home in the country and this is absolutely AMAZING! Keeps bugs out and i can now leave my back door open so I can enjoy the weather and the convenience of hands free opening and closing! Even with the wind blowing it magnetizes back together when opened. Perfect for my dogs and kids (ecs me with hands full)! Easy install! I installed mine on the inside of my back door (because of the way my door opens). I purchased the TTS of my door measurements and it fit perfectly for either side of my door. The mesh material is the same as pool durability covers, they are not heavy but not too lightweight for tearing. I give this a 10/10 highly recommend.

This Magnetic Screen Door is highly effective. It functions as it was designed; keep bugs out, and pet & kids friendly. This door screen allows quick and easy passage and it immediately seals shut magnetically. It is very simple and easy to install with robust velcro borders. This was a quality investment...

This magnetic screen works quite well - better than I guessed it would. I'm fairly impressed by the quality of the material, how strong the magnets forming the closure edges are, and by how easy it was to install. The adhesive on the hook-loop strip is very good - better than I've seen with other products that use adhesive for things like this type self-stick mounting. A few other observations... > It's fairly hard to gauge the size to order, since it's all flexible and just a bit stretchy. What I measured for the inside frame to frame was about 34.5 inches, so I ordered a 36 inch wide screen. Where the outside edges of the installed screen are, it's about 38 inches wide. I agree with their suggestion to order the next larger size than you measure, but just be aware - it will probably come a little larger than their listing. Fortunately, this totally works in my situation, since I had 1"x4" doorframe wood (as is fairly common). Just - be aware, plan accordingly. > They mention to mount the top adhesive/hook-loop strip with the middle slightly higher than the ends, so that the natural "drape" of the fabric will fall together at the bottom, rather than having any tension or leaving a gap towards the bottom. I did this, with the center of the top strip perhaps half an inch (1cm) higher than the edges. You can't even tell it, it's such a small change across 3 feet (95cm) of distance, but I'm confident that this small adaptation in the installation does let the magnetic closure work well all the way down - just avoiding any fabric tension with these decent but not super-strong magnets. Anyway, once I installed it, everything closes well (as shown in the videos). Their instructions are to put the Velcro (or hook-loop strip) onto the sides and top of the screen, and then hold it up where it needs to be installed and pull off the backing to expose the adhesive, applying the sticky part to the door frame as you go. While basically correct, I found that this would be nearly impossible without 8 hands holding corners and edges in place. I greatly simplified the whole installation by only putting the Velcro strip on the two sides, and then holding it all up to see where the top strip would go on the frame, and making a few marks at the edges and center (with the center about half an inch higher, as mentioned. Then I set it all aside and just did the top adhesive strip, using my marks. Pulling the backing off one end and starting with that end, I applied the strip to the frame as straight and with a bit of tension to avoid any folds or humps as I went across, peeling the backing off about 8 inches at a time as I stuck it to the frame. This worked splendidly, because now I could just hang the whole screen in place, with the edges hanging where they naturally fell, and adjusting the screen top and edges to fall naturally right where I wanted them, straight up and down. From there, peeling back the backing as I went down each side was super-simple and went fairly quickly. I was able to gauge just how much tension there was from side to side, leaving it just a bit loose so it would easily close by itself, and making sure there were no "tension lines" that fabric can develop if it is tugging in only one spot, in one direction. Even if that happened at install, pulling the fabric screen off the Velcro of the frame and letting it fall back onto the Velcro more naturally would eliminate the issue - but if you do the install carefully and keep everything straight up and down, none of that fabric tension develops. > The supply some gold metal tacks that you can tap in with a few light hammer strikes, if you like. I did not put them in, but I kept them handy for when I need them. I will actually be buying some better ones at the store or online, however, since these look flimsy and easy to bend, and also have no way to remove them. They might be useful when I pull the screen off the velcro for the winter, to help the adhesive keep the Velcro strips in place. But if you want to put them in with the screen installed, they would give you trouble when you wanted to remove the screen and only leave the Velcro strips in place for when you next install the screen material. Basically, there are other pin-type fasteners that actually have a double head, or a knob, or a hoop on top to allow them to easily be removed without digging at them with a screwdriver or chisel. I will be buying something like that to hold the screen material on the velcro strip when I have the screen in place. And, I have a heavy duty upholstery stapler that I plan to use on the Velcro strips themselves, both to help the adhesive hold to the frame, and to hold the strips in place once the sun bakes the adhesive into useless powder, since these are mounted to the outside of an exterior door frame. Sun and weather WILL take a toll over time. Staples are a cheap way to keep everything in place as long as possible. > I don't expect a fabric door or fabric Velcro strips to last forever. We will see how long it all remains functional. At around $30 USD, replacing this after 3 years (or whatever) is not terribly burdensome, and this turns out to be a great solution for our very strange door that is not a standard size, and would require a custom screen door to be built for it. Estimates I've seen are in the $1000 USD or higher range - so this alternative is very attractive and should work well for our time in this house. I took some pics and made a couple of videos, they show a lot of this and more, since it's hard to describe how simple this door is to use, and how well it closes up behind you as you go through it. Nice. Very nice. Recommended, for now. I will update here if something fails to work as expected - but for now, everything is great!

Cumple con la función solicitada. Me gustó mucho

I will definitely buy again. Really effective and many people that came to the house loved it and want to buy

De bonnes qualité

SIMPLY THE BEST EVER. Wow

This door mesh is perfect. I love it!