250g PLA Filament 1.75mm Bundle,3D Printer Filament Bundle Multicolor, Neatly Wound PLA Filament, Individually Vacuum Packed,250g Spool,8 Rolls,Black+White+Grey+Transparent+Red+Blue+Orange+Green

Bought this for my son’s new Bambu Lab P2S AMS printer and honestly it’s been great so far. We’ve tried several colors already and haven’t had any clogging or tangling issues. The AMS fed everything fine. The colors are vibrant and the print quality surprised us for a multi-pack bundle. My son printed the blue crystal dragon in the photo and the detail came out really nice, especially all the little spikes and moving parts. I also like that the rolls are smaller because you get a lot of color choices without spending a fortune on full spools. Everything arrived sealed well and printed good right out of the package. Definitely would buy again.

These are wonderful! My daughter just got her first 3D printer and she has been printing so many things using these filaments. We have had no problems with them and everything is coming out looking amazing! She is getting so much joy and encouragement bringing her creations to life and they are lasting a long time. She has been able to crate many items and has not come close to running out of any colors yet.

Great selection of colors. Keeps the kids busy for hours.

Great filament. Works well with out flash forge

We purchased this pack of filament about 7 months ago and think it’s about at the end of its shelf life, just too brittle now. If you plan on using up the filament quickly, this might be a good deal for you. I must say, SUNLU, as a rule, is a good filament, and these smaller rolls are convenient to try colors, but overall, we won’t buy again, not in the small rolls. Yes, print was very good as is the price. The spools are SO SMALL that the filament is wound tight as the filament is depleted and coiled badly, making it so we needed to be by the printer to be sure there weren’t any kink issues. Prints good, tiny spools are terrible. 1/4k spools probably only good for the children’s’ printers.

Sunlu filament is the worst I’ve ever used. Every single spool I’ve gotten of theirs (12+ total between a big multi color pack and a few single rolls) has tangled up and ruined prints. Other brands don’t do this. Even super cheap $5 spools from AliExpress and Amazon Haul don’t do that. All the Sunlu stuff I’ve had does, regardless of color, PLA, or PLA+. It’s cheap but not cheap enough when other brands don’t have problems knotting up for the same price. Amazon even refunded one of the spools because the tangles were so bad. Stay away and choose another similar priced brand.

Good amount for starting. It has the most common colors used in 3d printing. Very helpful when it comes to muti color 3d printing

I haven't printed off all the rolls so I will only comment on the colors I've used. I'm not sure if this is just a one time problem with the black roll, but it clogged my extruder so bad I had to take the whole thing apart to fix it. A piece of filament was wrapped all the way around the gear inside the extruder. It's a brand new Flashforge adventurer 5m pro. There are also dents in the black filament and parts of the roll that are bent which made it impossible to feed into the filament tube. I ended up having to cut huge chunks of the roll off to continue using it, which killed me because it felt like I was throwing money into the garbage. I dont want to give it 3 starts, but im not sure it deserves 4 so far. Like I said, I'm not sure if it was just a fluke. If I encounter any more issues I will come back and update my review. I did get a couple prints that came out nicely using the green roll. The print I did with the white roll was really bubbly and stringy. I know it is not my machine or the file because I printed the exactly same thing using a different brand of filament and it printed perfectly. A couple rolls were tangled and I am glad I was standing nearby so it didn't break my brand new printer. I had to cut the roll, rewind it, and feed it back into the filament tube. They were also extremely brittle. When I went to use all of them for the first time, they snapped when trying to remove the end from the holes. I attached pictures of the issues with the black roll, a paintbrush stand I made using the green, a picture of the nintendo switch comfort grip I made using white that shows the issues, and pictures of some rolls as they came still unopened. The good.... The colors are nice and vibrant and match the pictures. They were wrapped nice and airtight. The prints I didn't have any issues with came out looking really nice. I don't want say too many bad things about it because I don't think it's a bad brand of filament. I really want to like it, but my experience with it so far hasn't been great.

I thought I was getting getting a good deal of $15. per roll, thinking they were 1 kg rolls. I did not read carefully, as these are only 250 g rolls each. This equates to over $60 per kg. Not a good value at all.

2kg de filament pour seulement 36 euros est une affaire super ! De plus on a 8 couleurs differentes ce qui permet de faire des impressions multicouleurs si votre imprimante le permet. Le materiau est solide, conforme et marche super bien, forcement les bobines de 250g vont assez vite si vous imprimez beaucoup mais au total c'est un produit que je recommande tout a fait car toutes les impressions que j'ai fait avec ont une super qualité !

Das SUNLU PLA Filament 8 Farben Bundle bietet eine schöne Vielfalt an intensiven, lebendigen Farben, ideal für bunte und kreative 3D-Druckprojekte. Die Druckqualität ist konstant gut, mit einer gleichmäßigen Dicke von 1,75 mm und sehr guter Haftung zwischen den Schichten. SUNLU Filament lässt sich leicht drucken, Verstopfungen oder Verwicklungen treten kaum auf. Das Filament hat eine geringe Schrumpfung und erzeugt detailreiche, glatte Oberflächen. Für Einsteiger und erfahrene Anwender ist das Set eine solide und preiswerte Wahl, um die Farbpalette im 3D-Druck zu erweitern.

Fácil de imprimir con buena calidad en impresora Ender 3, solo es recomendable imprimir torres de temperatura y retracción la primera vez, la configuración funciona bien para todos los colores. Impresión a 200*C hotend, 55*C cama, retracción estándar para la impresora

Très bon produit